Stimmen - 1, Durchschnittliche Bewertung: 5
(
)
)
|
Anleitung Zusammenfassung
COMPANY Features • Compression molded from our exclusive solid Vikrell® material • Innovative four-piece modular design for seamless appearance • Tongue-and-groove 4-piece modular design allows for easy ''snap together" installation • Durable high-gloss finish • 10-year consumer/3-year commercial limited warranty • Left or right drain • Available with or without above-the-floor drain • Wall surround allows for attachment of grab bars • 60' (152.4 cm) x 31-1/2' (80 cm) x 75-3/4" (192.4 cm) complete unit rough-in dimensions include flange • 60' (152.4 cm) x 30' (76.2 cm) x 74-1/4" (188.6 cm) complete unit finished dimensions Codes/Standards Applicable Specified model meets or exceeds the following: • ANSIZ124.1.2 • ASTM E162 • ASTM E662 • CSA B45.0 • CSA B45.5 60' (152.4 cm) BATH/SHOWER SYSTEM WITH BACKER BOARDS 71090116 Colors/Finishes • 0: White • Other: Refer to Price Book for additional colors/finishes Specified Model Model Complete Unit Description Colors/Finishes 71090116 60" (152.4 cm) bath and wall surround with backer boards, left drain □0 □ Other 71090118 60" (152.4 cm) bath and wall surround with backer boards, above-the-floor left drain □0 □ Other 71090126 60" (152.4 cm) bath and wall surround with backer boards, right drain □0 □ Other 71090128 60" (152.4 cm) bath and wall surround with backer boards, above-the-floor right drain □0 □ Other Model Wall Component Description Colors/Finishes 71094106 Complete wall set with backer board locations □ 0 □ Other Page 1 of 2 1065806-4-D For more information visit SterlingPlumbing.com or call 1-800-STERLING Technical Information Fixture:* basin area top area Bathing well 42" (106.7 cm) x 16-1/4" (41.3 cm) 56" (142.2 cm) x 23-3/4" (60.3 cm) water depth capacity To overflow 12" (33 cm) 34 gal (128.7 L) * Approximate measurements for comparison only. Model Door maximum width Door maximum height 71090116 71090118 71090126 71090128 71090416 71090426 58-1/2" (148.4 cm) 56-1/2" (143.5 cm) Installation Notes Install this product according to the installation guide. Size the drain cutout to fit the drain assembly that will be used. End stud positioning is critical if nailing-in flanges are to be used. Double studding is recommended for pivot shower door installations. Studs should be positioned roughly as shown. Attach grab bars at the specified backer board locations only. Adjacent finished wall thickness must not exceed 9/16" (1.4 cm). 30" (76.2 cm) 1-1/2" (3.8 cm) 31-1/2" (80 cm) 3" (7.6 cm) 14" 6" (15 2.,cm) (356 cm) 30 (76 2 cm) 16" (40.6 cm) (TyP'cal) • • • • • 8" (20.3 cm) 31-1/2" (80 cm) 18" (45.7 cm) jfl y 4" (10.2 cm) /t8" —1(20.3 cm) 22-1/4" (56.5 cm) 60" (152.4 cm) \ \ Recommended Support Clip (5 Total) 19" (48.3 cm) 22" (55.9 cm) Note: Right and left end walls are the same, only mirrored. T ! Backer board locations 2" (5.1 cm) 1" (2.5 cm) 11" (27.9 cm) [2-3/4" (7 cm). Overflow Detail 14-1/4" (36.2 cm) Drain Cutout' ' 2" (5.1 cm)! " 3-1/2" D. Drain (8.9 cm) ^ 60-1/8" (152.7 cm) M'n + 60-1/4" (153 cm) Max + (22 2 cm) 18„ (457 cm) Grab Bar Back Wall 10" (25.4 cm) 8-3/4" End Wall ! ■/' 1 Sn3 I I ! 1 ! ! =F Grab Bar 24" (61 cm) Grab Bar 22" (55.9 cm) 4-3/4" - (12.1 cm) 3-1/2" 21" (53.3 cm) (55.9 cm) d v---; 2" (5.1 cm) Product Diagram ACCLAIMtm 60" (152.4 cm) BATH/SHOWER SYSTEM WITH BACKER BOARDS Page 2 of 2 1065806-4-D STERLING...