|
Anleitung Zusammenfassung
H63 © 2006 American Standard Inc. Revised 5/06 COLONY™ 5-1/2' x 32" w/INTEGRAL APRON WHIRLPOOL & BATHING POOL HIGH GLOSS ACRYLIC C/L OF 66” (1676mm) WATER RETENTION FLANGE (3 SIDES) FINISHED WALL 7-1/4” (184mm) C/L OF DRAIN 3/4” (19mm) 15-1/2" (394mm) 32” (813mm) 1-1/2” (38mm) C/L OF DRAIN OUTLET ON/OFF SWITCH C/L OF SUPPLIES PUMP SUPPLIES 2-3/8 ± 1/2 2-3/8 ± 1/2 (60 mm ± 13 mm) (60 mm ± 13 mm) 66” (1676mm) WATER RETENTION FLANGE (3 SIDES) FINISHED WALL 7-1/4” (184mm) C/L OF DRAIN 3/4” (19mm) 15-1/2" (394mm) 32” (813mm) 1-1/2” (38mm) C/L OF DRAIN OUTLET C/L OF C/L OF SHOWER ARM 19-1/4(489mm) REF. DIM19-1/2(459mm) BATH SUPPORT MATERIALROUGHFLOORTOP OFDECK (83mm) 2-3/4(70mm) 1-1/2 N.P.T.M. THREADSSHOWER ARM FINISHED OPTIONAL TO WALL FINISHED FLOOR USUALLY BETWEEN 1" WATER C/L OF 65 & 78 RETENTION VALVES (1651 & 1981mm) FLANGE (3 SIDES) 12 C/L OFC/L OF SPOUT OVERFLOW (305mm) LEVELING 19-1/4(489mm) REF. DIM1" WATERRETENTIONFLANGE(3 SIDES) 19-1/2(459mm) BATH SUPPORT MATERIALROUGHFLOOR FINISHEDWALLTOP OFDECK 3-1/4(83mm) OPTIONAL TO FINISHED FLOOR USUALLY BETWEEN65 & 78 (1651 & 1981mm) C/L OF OVERFLOW C/L OFSPOUTC/L OFVALVES2-3/4(70mm) 1-1/2 N.P.T.M. THREADS12 (305mm) OPT. 4(102mm) TILINGFLANGE STRINGER LEVELING OPT. STRINGER 4 TILING 3-1/4 NOT FOR (102 mm) FLANGE NOT FOR SUPPORT SUPPORT UNDERSIDE OF DECK UNDERSIDE OF DECK 1-1/2 O.D.TAILPIECE (117mm) (117mm) 1-1/2 O.D.TAILPIECE 4-5/8 4-5/8 GENERAL SPECIFICATIONS FOR 1748 WHIRLPOOL GENERAL SPECIFICATIONS FOR 1748 BATHING POOL INSTALLED SIZE 66 x 32 x 19-1/2 In.(1676 x 813 x 495mm) INSTALLED SIZE 66 x 32 x 19-1/2 In. WEIGHT 120 Lbs. (54 Kg.) (1676 x 813 x 495mm) WEIGHT w/WATER 537 Lbs. (244 Kg.) GAL. TO OVERFLOW 50 Gal. (189 L.) WEIGHT 100 Lbs. (45 Kg.) WHIRLPOOL MIN. OPERATING VOL. 46 Gal. (174 L.)WEIGHT w/WATER 517 Lbs. (235 Kg.) BATHING WELL AT SUMP 18 x 48 In. (457 x 1219mm)GAL. TO OVERFLOW 50 Gal. (189 L) BATHING WELL AT RIM 26 x 59 In.(660 x 1499mm) BATHING WELL AT SUMP 18 x 48 In. (457 x 1219mm) WATER DEPTH TO OVERFLOW 12-1/2 In. (318 mm) BATHING WELL AT RIM 26 X 59 In. (660 x 1499mm) FLOOR LOADING 37 Lbs./Sq. Ft. (179 Kgs/Sq. m.) WATER DEPTH TO OVERFLOW 12-1/2 In. (318mm) (PROJECTED AREA) PTS. 20.8 FLOOR LOADING 35 Lbs./Sq.Ft. (173 Kgs./Sq.m) CUBE (FT3) 35.3 (PROJECTED AREA) PTS. 25.6 WHIRLPOOL ELECTRICAL SPECIFICATIONS CUBE (FT3) 29.7 SYSTEM I PUMP 1.1 HP, 9.9 AMPS, 120V. NOTES: BATH TO BE INSTALLED ABOVE FLOOR LINE AS A RECESS INSTALLATION. SUPPORT OF BATH BY SUMP BEDDING. SUPPORT AND ENCLOSING MATERIAL BY OTHERS. ¦ REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION. LEFT HAND OUTLET SHOWN, RIGHT HAND REVERSE DIMENSIONS (2776.118). FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY. PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS. IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standards Z124.1 and A112.19.7. These measurements are subject to change or cancellation. No responsibility is assumed for...
Dieses Handbuch ist für folgende Modelle:Andere Home Zubehör - 1748.102 (194.06 kb)
Andere Home Zubehör - 1748.218C (194.06 kb)
Andere Home Zubehör - 1748.118C (194.06 kb)
Andere Home Zubehör - 1748.202 (194.06 kb)