Login:
Stimmen - 3, Durchschnittliche Bewertung: 3.3 ( )

Anleitung Westinghouse, modell W-261

Hersteller: Westinghouse
Dateigröße: 91.86 kb
Dateiname: 64507.pdf
Unterrichtssprache:enesfr
Link zum kostenlosen Download Hinweise finden Sie am Ende der Seite



Anleitung Zusammenfassung


WARNING NOTE: DO NOT INSTALL ON A POST THAT RESULTS IN A VERTICAL RISE OF 25 FEET OR HIGHER. LAMP WARRANTY INFORMATION The Energy-saving fluorescent light source included is warranted for a period of 10,000 hours, based on normal use from the date of original purchase, against defects in material or workmanship. Westinghouse Replacement Lamp Information WATTAGE Model No. 13 36307 18 36308 23 36309 27 36310 WARNING ELECTRICAL SHOCK CAN RESULT IN SERIOUS INJURY. Read and follow instructions exactly as shown. If instructions are unclear, do not proceed. Contact a qualified electrician. Read all instructions before beginning. Proper wiring is essential for safe operation of this fixture. When cutting or drilling into walls or ceilings, do not damage electrical wiring, gas lines, or water lines. If any of the fixture or wiring components are damaged, do not install fixture. Return to place of purchase. For fixtures provided with 75° C or 90° C supply wire warning only. (These warnings are provided on the U.L. label and on the fixture carton.) Risk of fire. Most dwellings built before 1985 have supply wires rated 60° C. Consult a qualified electrician before installing. 2 12 pg_W-261_EFS 5/16/06 10:38 PM Page 3 FIGURE 1. *NOT SUPPLIED Line art shown may not exactly match the fixture enclosed. However, the installation instructions do apply to this fixture. NOTE: Lamp and Ballast are replaceablewithout cutting any wires. Turn power off first to avoid "risk of shock". Simple twist & lock replacement. MOUNTING SCREWS (D) SCREWS (E) POST (B) COVER (F) WIRE CONNECTORS (C) FITTER (A) SOCKET BASE (H) LAMP (G) 3 12 pg_W-261_EFS 5/16/06 10:38 PM Page 4 MOUNTING AND WIRING INSTRUCTIONS CAUTION: For fixtures labeled for outdoor and wet location use, provide a water-tight seal between the fixture and the mounting surface by using silicone or similar caulking. NOTE: Underwriters Laboratories (UL) does not require all fixtures to have ground wires. These fixtures meet all UL specifications. 1. Turn off power at circuit box to avoid possible electric shock. NOTE: If post does not have mounting holes, follow step 2. Otherwise skip step 2 and proceed with step 3. 2. Place fitter (A) over post (B). Mark post (B) using fitter holes as guide. Remove fitter (A), drill 1/8” hole into post (B) at each mark. 3. Pull wires up from post (B) and thread through fitter (A). 4. Identify color coding of fixture wires (see figure 2). 5. To connect wires, take black fixture wire (group A from fig. 2) and place evenly against black post wire. Do not twist wires. 6. Fit wire connector (C from figure 1) over wires and twist until there is a firm connection. If wire connector (C) easily comes off, reattach and check again for a firm connection. 7. Repeat steps 5 and 6 with the white (group B from fig. 2) fixture wire and white post wire. 8. Place ground wire from fixture evenly against ground wire (metal or green wire) from post (B). 9. Repeat step 6 for ground wires. FIXTURE ASSEMBLY INSTRUCTIONS 1. Place fitter (A) over post (B) (see figure 1). 2. Secure with mounting screws (D). 3. Remove screws (E) from cover (F) and remove cover (F). 4. Install lamp(s) (G) into socket base (H). 5. Replace cover (F) and secure with screws (E). 6. Turn power back on at circuit box. Fixture includes photocell which turns on at dusk and off at dawn, and cannot be disabled. 4 12 pg_W-261_EFS 5/16/06 10:38 PM Page 5 LES INSTRUCTIONS D'ASSEMBLAGE DE L'APPAREIL D'ECLAIRAGE POUR UTILISATION EXTERIEURE Felicitations ! Vous avez achete un produit de Westinghouse Lighting. Cet appareil d'eclairage a ete concu pour durer de nombreuses annees. Veuillez envoyer vos questions et commentaires par courriel, a l'adresse suivante : catalogroom@westinghouselighting.com N NNO OOT TTA AA : :: Deballez soigneusement l'appareil d'eclairage et les pieces. Assurez-vous que toutes les pieces y sont avant de mettre l’emballage au rebut (voir fig. 1). GARANTIE LIMITEE DE CINQ ANS Cet appareil d'eclairage Westinghouse est assorti d’une garantie de 5 ans contre les defauts de materiaux et de fabrication, qui entre en vigueur a partir de la date d'achat. La presente garantie se substitue a toute autre garantie expresse ou tacite. Cette garantie ne porte ni sur les dommages survenant suite a une catastrophe naturelle (telle que la foudre), ni sur la corrosion ou la decoloration des pieces; la garantie ne porte pas sur les dommages survenant suite a une utilisation anormale, une installation impropre, une surtension de courant electrique ou des actes d’un tiers. Cette garantie ne porte pas sur le verre brise. Si vous avez recu votre appareil d'eclairage avec un globe de verre brise, veuillez appeler Westinghouse Lighting afin d’obtenir une piece de remplacement sans frais. Cette garantie ne porte pas sur les frais de demontage et de reinstallation du ventilateur. Si cet appareil d'eclairage ne fonctionne pas pour une des raisons couvertes par la presente garantie, renvoyez tout simplement l'appa...


Bewertungen



Bewerten
Vorname:
Geben Sie zwei Ziffern:
capcha





Kategorien