Stimmen - 3, Durchschnittliche Bewertung: 4.7 ( )

Hersteller: Haier Dateigröße: 868.79 kb Dateiname: hpim25ss_manual.pdf Unterrichtssprache:

1-2 Safety Instructions ......................................................................3 Parts and Accessories............................................................. 5-6 Operating Instructions................................................................7 Pre-Operating Instructions .................................................................7 Operating Instructions.......................................................................8 Operating Process............................................................................9 Cleaning and Maintenance......................................................10 Troubleshooting Guide.............................................................11 limited Warranty......................................................................12 Specifications Model # HPIM25SS/S Electrical Shock Protection Class 1 Power 115V/60Hz Ice Making Current 1.5 A Ice Harvest Current 2.0A Refrigerant R134a/2.3 Oz. Design Pressure High Side 290 Psig Low Side 88 Psig Dimensions 9.5" x 14.1" x 12.9" Weight 20.5 lbs. Enclosure ABS plastic/Stainless Steel English PARTS, FUNCTIONS AND FEATURES 1 3 67 5 1. Cover with transparent window 2. Water reservoir (Not shown) 3. Control panel 4. Water Drain Cap (Not Shown - Front Bottom of Unit) 5. Compressor cooling fan (Do not block air flow) 6. Ice shovel 7. Ice basket 5 English Control Panel: Easy to use, button function with LED indicators A. Power ON LED indicator light B. Power ON/OFF button C. Ice cube SELECT SIZE button D. Selected ice size LED light indicator displaying: SMALL, and LARGE ice cubes to make E. "ADD WATER" (Alerts that there is no water in the water reservoir), must add water F. "ICE FULL" LED indicator D E AF B C English OPERATING INSTRUCTIONS This portable icemaker uses a fully automatic control system, with an advanced microcomputer for easy and convenient ice making. Making ice is simple and fast. Just add water, plug into an outlet, and press the ON button. You can select one of the two ice cube sizes with the touch of a button. When first turning on the unit or during icemaking cycles, the compressor will stay idle for 3 minutes, while energizing. There are warning indicators that alert you to fill water when the reservoir is empty and to remove ice when the storage basket is full. The icemaker also has built-in safeguards that can limit accidental damage, automatically shutting down the system when necessary. Pre-Operating Instructions Please read carefully. 1. The incline angle of the icemaker cabinet should not exceed 45. during transportation or use. Do not turn the icemaker upside down. Doing so could cause the compressor or refrigerating system to operate incorrectly. When the icemaker is moved or transported, please allow time for the fluids in the compressor to settle. Before using the icemaker for the first time, please wait 2 hours after the unit has been leveled and positioned in its proper place. 2. Please ensure the icemaker is level and on a stable table or platform to avoid malfunction. 3. The machine must be placed on a dry and level surface with sufficient ventilation, far from heat sources such as ovens, heaters and corrosive gases. Leave an 8-inch clearance on all sides of the icemaker for proper ventilation. 4. Do not fill the water reservoir with hot water. This may damage the icemaker. It is best to fill the water reservoir with water of room temperature or lower. English Operating Instructions 1. Open the top cover, take out the ice storage basket and fill the water reservoir with drinkable (tap, purified or bottled) 2.3 quarts water to the level mark and replace the ice storage basket. Lift ice basket to add water Make sure that the water level does not reach above the level mark or the bottom of the ice storage basket. Close the top cover. Note: During the operation process, if the level of water in the water reservoir becomes too low, the machine will automatically stop operating and the "Add Water" indicator will display on the LED. 2. Plug the unit into a grounded outlet. Push the ON / OFF button on the control panel to turn on the machine. 3. Select the desired size of ice cube by pressing the S or L ice selector button. S = Small ice cubes (Approx. 7 minutes) L = Large ice cubes (Approx. 8 minutes) The icemaker will start making ice soon after. The next cycle of 9 ice cubes is complete (based on water temperature, ambient room temperature and selected ice cube size). Note: To stop the operation, press the ON/OFF button. English Operating Process 1. Water is pumped from the water storage tank to the water box, which may take up to 1 minute. 2. The icemaking cycle begins when the evaporator rods are dipped into the water box. You will hear the compressor working. 3. It will take approximately 6-13 minutes for each icemaking cycle, depending on the size selected & room temperature. The larger the size or higher room temperature, the more time is needed to make the ice. After...

Herunterladen

Geben Sie zwei Ziffern: