Stimmen - 3, Durchschnittliche Bewertung: 3.7
(
)
)
|
Anleitung Zusammenfassung
Read all instructions before using appliance. Do not touch hot surfaces. Use handles or knobs. To protect against electric shock, do not immerse probe, cord or plug in water or other liquids. See Cleaning Instructions. This appliance is not for use by children. Close supervision is necessary when this appliance is used near children. Do not leave appliance unattended while in use. Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the appliance. Always attach probe to Griddle before plugging cord into wall outlet. To disconnect, turn temperature control knob to OFF, then remove plug from wall outlet. Do not operate any damaged appliance. Do not operate with a damaged cord or plug, or after the appliance malfunctions, or has been dropped or damaged in any manner. Contact Salton Consumer Service for return authorization, examination, repair or adjustment. The use of accessory attachments not recommended by the appliance manufacturer may cause injuries. Do not use outdoors or while standing in a damp area. Do not let cord hang over edge of table or counter, or touch hot surfaces. Do not place on or near a hot gas or electric burner or in a heated oven. Extreme caution must be used when moving an appliance containing hot oil or other hot liquids. 1. MAXGW1 Use and Care Guide IMPORTANT SAFEGUARDS IMPORTANT SAFEGUARDS When using this appliance, provide 4 to 6 inches air space on all sides for air circulation. Do not use on surfaces where heat may cause a problem. Use extreme caution when disposing of hot grease. Do not place drip tray on top of hot Griddle surface. Do not use appliance for other than its intended use. CAUTION: Hot Surfaces. SAVE THESE INSTRUCTIONS CAUTION: A short power supply cord is provided to reduce the risk of personal injury resulting from becoming entangled in or tripping over a longer cord. Extension cords are available from local hardware stores and may be used if care is exercised in their use. If an extension cord is required, special care and caution is necessary. The cord must also be: (1) marked with an electrical rating of 125 V. and at least 10 A., 1250 W., and (2) arranged so that it will not drape over the countertop or tabletop where it can be pulled on by children or tripped over accidentally. POLARIZED PLUG: This appliance has a polarized plug (one blade is wider than the other). As a safety feature to reduce the risk of electrical shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature. ELECTRIC POWER: If the electric circuit is overloaded with other appliances, your appliance may not operate properly. It should be operated on a separate electrical circuit from other appliances. PLASTICIZER WARNING CAUTION: To prevent Plasticizers from migrating from the finish of the counter top or table top or other furniture, place NON-PLASTIC coasters or place mats between the appliance and the finish of the counter top or table top. Failure to do so may cause the finish to darken, permanent blemishes may occur or stains can appear. This product is for household use only. ® Using Your Cool-Edge Griddle PRODUCT MAY VARY SLIGHTLY FROM ILLUSTRATIONS Grease Drain Temperature Non-Stick Control Probe Griddle (P/N 21698) Surface Grease Channels Cool- Edge Drip Tray Spatula Non-Skid (P/N 21697) (P/N 21699) Rubber Feet (P/N 21700) 1. Before first use, see Cleaning Instructions and Hints For Care and Use of Non-Stick Surface. 2. Insert drip tray into rails under Griddle, positioned directly under the grease drain. 3. Turn temperature control knob on probe to OFF position and attach securely in place. 4. Coat the non-stick surface with vegetable shortening before heating. If necessary, remove excess oil with paper towel. Plug into 120V AC outlet. Align the pointer to the proper temperature on temperature control knob. The light on the probe will illuminate. The unit is preheated when the light on the probe goes off. The light will cycle on and off during use, indicating the proper temperature is being maintained. 5. When cooking is finished, turn temperature control knob on control probe to OFF position, unplug from outlet and cool before cleaning. CAUTION: Because some countertop finishes are more affected by heat than others, use care not to place Griddle on surfaces where heat may cause a problem. CAUTION: Griddle surfaces are hot during use. 3. MAXGW1 Use and Care Guide Hints For Care and Use of Non-Stick Surface Hints For Care and Use of Non-Stick Surface To avoid scratching the non-stick surface, do not stack objects on Griddle. Use medium to low heat for best cooking results. Very high temperatures can cause discoloration and shorten the life span of any non-stick surface. If higher temperatures are necessary, preh...