Stimmen - 2, Durchschnittliche Bewertung: 4.5
(
)
)
|
Anleitung Zusammenfassung
Fully unwind the cord before use. Keep kettle clear of walls, curtains and other heat or steam sensitive materials. Minimum 200mm distance. Do not place on or near a hot gas or electric burner, or where it could touch a heated oven. Do not use on metal surfaces, for example, a sink drain board. To protect against electric shock, do not immerse the kettle base, switch area, power base, power supply cord or plug in water or allow moisture to come in contact with these parts. Always ensure the kettle switch is in the ‘OFF’ position, then turn the power off at the power outlet and remove the plug from the power outlet before attempting to move the KSK400.indd 2-3 appliance, when the appliance is not in use and before cleaning or storing. Allow all parts to cool before cleaning. Do not move the kettle from the power base during operation. Ensure the kettle has switched to ‘OFF’ position, after the water has boiled, before removing the kettle from the power base. Do not touch hot surfaces. Use the handle for lifting and carrying the appliance. Keep the appliance clean. Refer to care and cleaning (Page 4). The appliance is not intended for use by young children or infirm persons unless they have been adequately supervised by a responsible person to ensure that they can use the appliance safely. Young children should be supervised to ensure that they do not play with the appliance. Do not leave the appliance unattended when in use. It is recommended to regularly inspect the appliance. Do not use the appliance if power supply cord, plus and appliance becomes damaged in any way. Return the entire appliance to the nearest authorised Kambrook Service Centre for examination and/or repair. Please call 1300 139 798 for service centre details. Any maintenance other than cleaning should be performed at an authorised Kambrook Service Centre. This appliance is intended for household use only. Do not use this appliance for other than its intended use. Do not use in moving vehicles or boats. Do not use outdoors. The installation of a residual current device (safety switch) is recommended to provide additional safety protection when using electrical appliances. It is advisable that a safety switch with a rated residual operating current not exceeding 30mA be installed in the electrical circuit supplying the appliance. See your electrician for professional advice. DO nOT OPERATE ThE KETTLE On An InCLInED SURFACE. DO nOT MOvE ThE KETTLE WhILE IT IS SWITChED On. featUreS of yoUr KambrooK StaINLeSS SteeL 1.5L KettLe 1 3 2 7 4 5 6 1. Removable filter for cleaner water. 2. Safety locking lid. 3. Water window. 4. Power on/off switch. 5. Cord storage. 6. Multi directional cordless base. 7. 2200 watt concealed element 9/5/07 11:47:07 AM oPeratING yoUr KambrooK StaINLeSS SteeL 1.5L KettLe before fIrSt USe Remove any packaging material and promotional labels before using the kettle for the first time. It is recommended that before the first use to fill the kettle to the maximum level with cold tap water, bring to the boil and then discard the water. (TIP: add a few slices of lemon for a fresher scent). Your kettle will only operate when positioned on the power base with the On/OFF switch in the On position. The kettle will automatically switch off once the water is boiled. oPeratIoN of yoUr KettLe 1. To fill the kettle with water, remove it from the power base and open the lid by pressing the lid release button on top of the handle. The lid will automatically open. Fill with the desired amount of water. Do not operate the kettle without water. Always fill the kettle between the minimum and maximum marks on the water window. Too little water will result in the kettle switching off. 2.Ensure that the lid is closed and locked firmly into position before placing the kettle on the power base. 3. Place the kettle firmly onto the power base. Plug the cord into a 230/240v power outlet and switch on. 4. Press the On/OFF switch down to the ‘On’ position. The water level window will illuminate. 5. The kettle will automatically switch off once the water has boiled. Lift the kettle from the power base and pour the water. Take care to hold the kettle level, especially when filled to the maximum level. To re-boil it may be necessary to wait for a few seconds to allow the control to reset. The kettle should be stored on its power base when not in use. The power outlet should be switched off and the power cord unplugged from the power outlet when not in use. NoTe: Never operate the kettle dry - too little water will result in the kettle switching off. Do not overfill the kettle - filling above the maximum mark on the water window may result in boiling water splashing from the kettle. NoTe: This kettle must only be used with the KSK400.indd 4-5 power base supplied. Use caution when pouring water from your kettle as boiling water will scald. Do not pour water too quickly. NoTe: Do not remove the kettle from the power base during operation. ensure the kettle ...