Stimmen - , Durchschnittliche Bewertung:
(
)
)
Hersteller: Delfield
Dateigröße: 455.49 kb
Dateiname: 6647965d-a971-1484-5db7-a99c697cb607.pdf
Unterrichtssprache:
Das Dokument wird geladen, bitte warten
 |
Das Dokument wird geladen, bitte warten
Anleitung Zusammenfassung
Hot Food Tables IMPORTANTINFORMATIONREADBEFOREUSEPLEASESAVETHESEINSTRUCTIONS! CAUTION Effective May 2003 F14 AND 48000 Series Service and Installation Manual CONTENTSSERIAL NUMBER LOCATION SERIAL# LOCATION..............................................................2 RECEIVING & INSPECTING ..................................................2 SPECIFICATIONS ..................................................................3 INSTALLATION F14EW & F14EI (electric) ................................................3 48300 Series (electric) ....................................................3 F14GW (gas) ...................................................................5 OPERATION F14EI & 48300 Series (electric) ......................................4 F14EW (electric)..............................................................4 F14GW (gas) ...................................................................5 MAINTENANCE .....................................................................5 GAS BURNER ASSEMBLY: F14GW Series ............................6 DELFIELD FOOD WARMER (DFW) ASSEMBLIES with thermostatic controls ..............................................7 with infinite control .........................................................8 REPLACEMENT PARTS LISTS ..............................................9 WIRING DIAGRAMS F14EI & 48300 Series (electric) ....................................10 F14EW (electric)............................................................11 STANDARD WARRANTY...............................................13-14 AUTHORIZED PARTS DEPOTS............................(back cover) The serial number on all 14 Series and 48000 Series hot food tables is printed on the tag located on the plate shelf. Always have the serial number of your unit available when calling for parts or service. A complete list of authorized Delfield parts depots is shown on the back cover of this manual. ©2003 The Delfield Company. All rights reserved. Reproduction without written permission is prohibited. “Delfield” is a registered trademark of The Delfield Company. RECEIVING AND INSPECTING THE EQUIPMENT Even though most equipment is shipped crated, care should be taken during unloading so the equipment is not damaged while being moved into the building. 1. Visually inspect the exterior of the package and skid or container. Any damage should be noted and reported to the delivering carrier immediately. 2. If damaged, open and inspect the contents with the carrier. 3. In the event that the exterior is not damaged, yet upon opening, there is concealed damage to the equipment notify the carrier. Notification should be made verbally as well as in written form. 4. Request an inspection by the shipping company of the damaged equipment. This should be done within 10 days from receipt of the equipment. 5. Check the lower portion of the unit to be sure legs or casters are not bent. 6. Also open the compressor compartment housing and visually inspect the refrigeration package. Be sure lines are secure and base is still intact. 7. Freight carriers can supply the necessary damage forms upon request. 8. Retain all crating material until an inspection has been made or waived. Uncrating the Equipment First cut and remove the banding from around the crate. Remove the front of the crate material, use of some tools will be required. If the unit is on legs remove the top of the crate and lift the unit off the skid. If the unit is on casters it can be "rolled" off the skid. For customer service, call (800) 733-8829, (800) 773-8821, Fax (989) 773-3210, F14 AND 48000 Series Service and Installation Manual SPECIFICATIONS MODEL NUMBER OF AMPS SHIP MODEL NUMBER OF NUMBER OF SHIP NUMBER OPENINGS 208/230 WEIGHT NUMBER OPENINGS* GAS BURNERS BTU WEIGHT Electric with individual wells — wet or dry operation Gas with single tank — wet operation only F14EI232 2 10.0/11.0 216 lbs/98 kg F14GW232 2 1 20000 256 lbs/116 kg F14EI348 3 15.0/16.0 296 lbs/134 kg F14GW348 3 1 20000 326 lbs/148 kg F14EI460 4 20.0/22.0 376 lbs/170 kg F14GW460 4 1 20000 396 lbs/180 kg F14EI572 5 24.0/27.0 456 lbs/207 kg F14GW572 5 2 40000 456 lbs/207 kg F14EI688 6 29.0/32.0 536 lbs/243 kg F14GW688 6 2 40000 536 lbs/243 kg *Each opening measures 11.87” x 19.87” (30.2cm x 50.5cm). Electrical connections are 208/230 volt, 60 cycle, single phase. Each opening measures 11.87” x 19.87” (30.2cm x 50.5cm). MODEL SHIP NUMBER VOLTAGE AMPS WEIGHT Electric with single tank — wet operation only F14EW232 2 21.0/24.0 316 lbs/143 kg Electric with individual wells — wet or dry operation F14EW348 3 21.0/24.0 440 lbs/199 kg 48334 120/208 17.0/11.0 179 lbs/81 kg F14EW460 4 21.0/24.0 500 lbs/227 kg 48348 208/230 15.0/16.0 252 lbs/114 kg F14EW572 5 42.0/48.0 560 lbs/254 kg 48362 208/230 20.0/22.0 326 lbs/148 kg F14EW688 6 42.0/48.0 660 lbs/299 kg 48376 208/230 24.0/27.0 400 lbs/181 kg Electrical connections are 120/240 volt, or optional 120/208 volt. (120 volt circuit is required ...