Stimmen - 2, Durchschnittliche Bewertung: 5
(
)
)
|
Anleitung Zusammenfassung
Do not cut the power supply cord and do not attempt to repair it yourself. • Never attempt to remove or replace any parts other than those specified in this manual. • Do not attempt to repair the appliance. Take it to your nearest Black & Decker-owned or authorised Service Centre for repair. Electrical safety This product must be earthed. Always check that the power supply corresponds to the voltage on the rating plate. • Power plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (Class 1) appliances. Unmodified plugs and matching outlets will reduce the risk of electric shock. Extension cables & Class 1 product • A 3-core cable must be used as your appliance is earthed and of Class 1 construction. • Up to 30m (100ft) can be used without loss of power. To avoid the risk of electric shock, do not immerse the cord, plug or appliance in water or other liquid. • If the supply cord is damaged, it must be replaced by the manufacturer or an authorized Black & Decker Service Center in order to avoid a hazard. Before first use • Remove all packaging from the appliance. • Choose the required supply voltage by sliding the voltage selector to the correct position. (The voltage selector is located on the base of the appliance) • Clean the appliance before first use. • Fill the kettle with cold water to the maximum fill mark. Do not over fill as described below. 4 ENGLISH • Close the lid (1). Boil the water as described below. • Discard the boiled water and repeat the procedure. Assembly Your appliance has a cable tidy clip to enable compact storage when traveling. To extend the cable for use:- • Pull the cable release slider (located on the bottom of the appliance). The cable tidy clip (5) will now be released. • Lift the cable tidy clip (5) and un-wind the cable from the appliance. • Replace the cable tidy clip to its original position. A click will indicate that the cable tidy clip is secured in its correct position. Use Warning! Always place the appliance on a flat, clean and non-slip surface before operating it. Warning! Always allow the product and contents to cool before opening the lid / re-filling. Warning! Always check the water level before using the appliance. Never use the appliance without sufficient water. Warning! Steam may escape from the spout. • Disconnect the kettle from the power supply before filling or adding water. • Close the lid (1) after adding or filling water, otherwise the auto shut-off boiling function will not work. • Do not fill with more than the max level of water or there will be a risk of spillage. • Connect the kettle to power supply, press the on power switch (2), the indicator light (4) will come on to show the kettle is now functioning. • When the water has boiled, the kettle will switch off automatically and the indicator light (4) will go out. The auto shut-off function also works when the kettle is empty. • You can press the off power switch (3) to turn off the kettle during operation. Pouring boiling water • Make sure the appliance is switched off. • To avoid scalding, tilt the kettle slowly to pour the boiled water. • After pouring, remove the plug from the socket. Cleaning and maintenance Before cleaning and maintenance, remove the plug from the socket and allow the appliance to cool. Warning! Before cleaning and maintenance, switch the appliance off, remove the plug from the socket and allow the appliance to cool. Warning! Do not immerse the appliance, the cord set or the plug in water or any other liquid. • Wipe the exterior with a damp cloth. • Do not use scouring pads. 5 ENGLISH 6 • If necessary, use a mild detergent to remove spots. • Do not use any abrasive or solvent based cleaner. • Do not immerse the appliance in water or any other liquid. Technical data Voltage/Supply 1 220-240V ~ 50-60Hz Voltage/Supply 2 110-120V ~ 50-60Hz Power consumption 500 W Capacity 0.55 litres Weight 0.5 kg Protecting the environment Separate collection. This product must not be disposed of with normal household waste. Should you find one day that your Black & Decker product needs replacement, or if it is of no further use to you, do not dispose of it with other household waste. Make this product available for separate collection. • Black & Decker provides a facility for recycling Black & Decker products once they have reached the end of their working life. This service is provided free of charge. To take advantage of this service please return your product to any authorised repair agent who will collect them on our behalf. • You can check the location of your nearest authorised repair agent by contacting your local Black & Decker office at the address indicated in this manual. Alternatively, a list of authorized Black & Decker repair agents and full details of our after-sales service and contact are available on the Internet at: Guarantee Black & Decker is confident of the quality of its products and offers an outstanding ...