Stimmen - 4, Durchschnittliche Bewertung: 4.3 ( )

Hersteller: Hamilton Beach Dateigröße: 123.61 kb Dateiname: Unterrichtssprache:

- Do not use an adaptor. - Have an electrician replace the obsolete outlet. IMPORTANT SAFEGUARDS When using electric appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions. 2. Do not touch hot surfaces or hot water. Use handles or knobs. Care must be taken as burns can occur from touching hot parts or from spilled hot liquid. 3. To protect against fire, electric shock and personal injury do not immerse cord, plugs, power base or electric kettle in water or other liquid. 4. Close supervision is necessary when any appliance is used by or near children. 5. Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning. 6. Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or is dropped or damaged in any manner. Call our toll-free customer assistance number for information on examination, repair, or adjustment. 7. The use of accessory attachments not recommended by the manufacturer may result in fire, electrical shock or personal injury. 8. Do not use outdoors. 9. Do not let cord hang over edge of table or counter, or touch hot surfaces, including the stove. 10. Do not place electric kettle on or near a hot gas or electric burner or in a heated oven. 11. To disconnect electric kettle, turn any control to OFF (O) then remove plug from wall outlet. Never pull on cord as this may damage the cord and eventually cause electric shock. 12. Do not use appliance for other than intended use. 13. Do not use for other than heating water. Other liquids or food will contaminate the interior and void warranty. 14. Do not allow kettle to boil dry. 15. To avoid circuit overload, do not operate another high wattage appliance on the same circuit. SAVE THESE INSTRUCTIONS Other Consumer Safety Information This appliance is intended for household use only. To avoid an electrical circuit overload, do not operate another high wattage appliance on the same circuit with the kettle. The length of the cord used on this appliance was selected to reduce the hazards of becoming tangled in, or tripping over a longer cord. If a longer cord is necessary an approved extension cord may be used. The electrical rating of the extension cord must be equal to or greater than the rating of the kettle. Care must be taken to arrange the extension cord so that it will not drape over the countertop or tabletop where it can be pulled on by children or accidentally tripped over. wWARNING Burn Hazard • Use extreme caution when carrying kettle containing hot water. • Do not pour in the direction of people or over people. 2 22 840152800 ENv04.qxd 6/22/06 3:55 PM Page 3 Parts and Features 1. Lid 2. Anti-Scale Mesh Filter (inside spout) 3. Power Base 4. Power Switch I = ON O = OFF Using Your Electric Kettle BEFORE FIRST USE: Fill kettle to MAX indicator on water level window and bring to a boil until kettle shuts off automatically. Discard water and repeat. Rinse out kettle 2 or 3 times. The kettle is now ready for use. 1. Remove from power base before filling. 2. Fill kettle with required amount of water. Ensure that water level is between MIN and MAX on the water level indicator. If using the mesh filter, it must be in place. 3. Make sure that the lid is in place and the power base is on a level surface. If lid is not in place, auto shut-off will not operate. 4. Plug into outlet and turn on ( l ). 5. The kettle will switch off (O) automatically when the water has boiled. (Remember, the surface of the kettle gets hot; take care–only grip the kettle by the handle). 6. After use, unplug kettle and empty. NOTE: Use water only in the kettle. If used for foods or beverage such as tea or coffee, the warranty will be voided. wWARNING Burn Hazard If kettle is overfilled, boiling water may spit out of the spout. If Heating Element Discolors It is normal for stainless steel heating elements to discolor. This does not affect the performance of the kettle. Do not use abrasive scouring pads or cleaners as this may damage the stainless steel surface. 3 33 840152800 ENv04.qxd 6/22/06 3:55 PM Page 4 Using Your Electric Kettle (cont.) Cordless Kettle • For general operation see “Using Your • After use, the kettle may be left on Electric Kettle.” the base but we recommend you unplug the cord from the outlet. • After filling the kettle with water, it should be placed on the base so that it is correctly engaged. If Your Kettle Boils Dry The heating element is protected by 1 11. .. Turn the kettle OFF, unplug the kettle two automatic safety devices. If your and wait about 20 minutes for the kettle is accidentally switched on element to cool down. without being filled with water, or is 2 22. .. Refill the kettle, then use as normal allowed to boil dry, the kettle will and check that the kettle functions automatically switch off. You should: correctly. If Your Kettle Does Not Work Make these simple checks before calling...

Herunterladen

Geben Sie zwei Ziffern: