Stimmen - 2, Durchschnittliche Bewertung: 4.5 ( )

Hersteller: Seal-a-Meal Dateigröße: 637.49 kb Dateiname: Unterrichtssprache:

This will prevent soft foods from being crushed. Hint: For best results freeze foods that are soft, such as muffins, cakes and pies etc. so they maintain their shape when vacuum sealed. Sealing Moist Foods: When sealing moist foods, such as sauces or stews, you have the option to instantly seal the bag and bypass the auto-seal function if you see any liquid being drawn from the bag or whenever you believe the process is complete. Simply press the Vacuum Button immediately followed by the Seal Button and the vacuum pump will stop as the bag is sealed. Hint: For best results liquids should be frozen prior to vacuum sealing. Remove excess juices before sealing whenever possible. HOW TO SEAL BAGS WITHOUT VACUUMING 1. Place item to be sealed in pre-cut or custom sized bag. 2. Place bag at least 1/2" above the Sealing Strip. Make sure bag is straight (with no wrinkles) and close Lid. VacuumSeal -8 HOW TO SEAL BAGS WITHOUT VACUUMING (CONT.) 3. Firmly press down on both sides of lid making sure both sides are locked. Note: Sealer will not operate if Lid is not properly closed. 4. Press and hold Seal Button. Red Indicator Light will turn off when the seal is complete. VacuumSeal 5. Push in Lid Release Buttons to open Lid. VacuumSeal Warning: Even though the Sealing Strip is not powered when Lid is open, it may still be hot. CAUTION: This Vacuum Food Sealer is not for commercial use. If sealing more than 30 bags or canisters in a row, wait at least 25 minutes before continuing to use your Vacuum Food Sealer. CARE AND CLEANING Cleaning your Vacuum Food Sealer • Always unplug the unit before cleaning. • Always remove from wall mounted position prior to cleaning. • Do not immerse in water • Do not use abrasives to clean the unit. For White, Black or other non-Chrome finishes: •Wipe the outside of the unit with a damp cloth and soap. For Chrome finish: • Lightly spray a soft, clean cloth with a no wax formula furniture polish. • Lightly rub the outside surfaces (such as the lid) to remove fingerprints and restore the finish. Note: Do not use no wax formula furniture polish on inside of unit or on plastic parts. CAUTION: Do not immerse the Vacuum Food Sealer in water or other liquid. Cleaning the Sealing Foam Use a warm damp cloth with mild dish soap to remove any liquid or food particles that are on the surface of the foam. Cleaning the Removable Lock ‘n Seal™ Nozzle/Drip Tray The Seal-a-Meal® Vacuum Food Sealer is equipped with a Removable Lock ‘n Seal™ Nozzle/Drip Tray to trap any liquid that may be drawn from the bag. The Lock ‘n Seal™ Nozzle/Drip Tray contains Microban® antimicrobial product protection, which inhibits the growth of stain and odor causing bacteria and keeps the unit cleaner between cleanings. Normal cleaning practices should be maintained. Does not protect user from food borne illnesses. -9 VS125(428-1250) V.qxd 1/10/05 16:25 Page 11 CARE AND CLEANING (CONT.) 1. Pull Lever forward to release Nozzle/Drip Tray. 2. Carefully remove as not to spill any contents. 3. Over sink, open rubber Drain Plug located under the tray at the far end (Do NOT remove the recessed plug) and flush, or soak in warm soapy water (with a mild dish detergent). 4. Rinse thoroughly and allow to dry. 5. Replace Lock ‘n Seal™ Nozzle. Cleaning the Bags • Wash bags in warm, soapy water. • Bags can be washed in the dishwasher if desired. Turn bags inside out and spread them over the top rack. • Allow bags to dry completely before using. NOTE: DO NOT reuse bags if they have been used to store raw meats, fish, oily foods or have been boiled or microwaved. WALL MOUNTING FOR STORAGE Follow the steps below to wall mount your Seal-a-Meal® Vacuum Food Sealer. This is for storage only; do not operate the Vacuum Food Sealer from the wall. Anchors and screws included. 1. Bore two 1/4” holes ( 12" apart) along a straight line on the wall, either vertically or horizontally. 2. Hammer one screw anchor into each hole. 3. Screw the provided screws into the anchors leaving 3/8” head outside of the wall. 4. Hang Sealer on the screw heads. NOTE: Mounting is for storage only. Always clean the Removable Nozzle/Drip Tray prior to storing in the wall mounted position. The Vacuum Food Sealer should not be used while mounted on the wall. REFILLING THE BAG ROLL 1. Pull out one end of spring loaded bag roll holder. 2. Remove cardboard from empty roll. 3. Slide replacement roll onto holder. Make sure roll is positioned to dispense from the bottom. 4. Place end of holder back into slot. -10 REPLACING THE BAG CUTTER BLADE Replacement parts available at or Call: 1-800-557-4825. 1. Open bag roll cover. SealVacuum 2. With a Phillips head screwdriver, unscrew the Replacement Blade door. 3. Remove the blade door. 4. Replace the old knife blade with the new one. 5. Replace the door. 6. Tightly secure the screw. CAUTION: Sharp blade. BATTERY REPLACEMENT AND RECYCLING INFORMATION Replacement parts available at or Call: 1-800-557-482...

Herunterladen

Geben Sie zwei Ziffern: