Stimmen - 2, Durchschnittliche Bewertung: 4.5 ( )

Hersteller: GE Dateigröße: 603.54 kb Dateiname: Unterrichtssprache:

B. You may want to leave the stopper in the drain when not in use to prevent utensils and foreign objects from falling into the disposer. C. The disposer is ruggedly built to give you years and years of trouble-free service. It will handle all normal food wastes–BUT it will not grind and dispose such items as tin cans, bottles and bottle caps, glass, china, leather, cloth, crockery, rubber, string, feathers, or clam or oyster shells. These are waste materials and belong in the trash can or trash compactor. Care and maintenance. D. TO SPEED UP FOOD WASTE DISPOSAL... Cut or break up large bones, melon rinds, grapefruit skins and corn cobs. Items such as large bones, fibrous husks like lima bean pods and corn husks require considerable cutting time. For this reason, you may prefer to place them in the trash can or trash compactor. THE MOTOR IS PERMANENTLY LUBRICATED FOR LIFE. DO NOT ATTEMPT TO LUBRICATE YOURDISPOSER. The disposer is self cleaning and scours itself with each use. ¦ nnNEVER put lye or chemical cleaners into the disposer, as they cause serious corrosion of metal parts. ¦ nnYour disposer, except for the Batch Feed model, is equipped with a removable splash guard for ease of cleaning or replacement. Remove the splash guard by pulling it out from the top. To replace, insert into the sink flange and push down until it is properly seated. ¦ nnIf an odor develops, run orange or lemon rinds through the disposer. A dozen ice cubes sprinkled with a little household scouring powder will also work. 10 Before you call for service… Troubleshooting Tips Save time and money! Review the chart on this page first and you may not need to call for service. SAFETY NOTE: Before investigating, you must disconnect the power supply. WARNING! Before resetting, disconnect the power supply–please see SAFETYNOTEabove. The overload control prevents the motor from operating should overloading occur. This feature protects your house wiring and your disposer. When overloaded, the motor will stop automatically. Problem Possible Causes What To Do Loud noises (other than those during grinding of bones and fruit pits) Silverware, bottle cap or other foreign object has fallen into the disposer. • Remove the splash guard* and remove the object with long-handled tongs. Replace the splash guard*. Consumer SupportTroubleshooting TipsInstallation InstructionsSafety Instructions Operating Instructions Disposer does not start Reset button has been tripped. Reset Button Serial No. Remove Splash Guard Turntable Turntable cannot rotate. • With the splash guard* removed, check to see if the turntable will move freely using a broom handle. If the turntable moves freely, replace the splash guard* and check the reset button to see if it has been tripped. The reset button is red and located opposite the discharge elbow, near the bottom of the disposer. Push the button in until it clicks and remains depressed. If the reset button has not been tripped, check for a shorted or broken wire connecting to the disposer. Check the electrical power switch, fuse box or circuit breaker. If wiring and electrical components are intact, the unit may have internal problems that require service or replacement. • If the turntable does not turn freely, check for an object lodged between the turntable and the grind ring. Dislodge the object by moving the turntable with a broom handle. Then remove the object. If no foreign object is present, there may be internal problems. Disposer leaks If the leak is at the top, it may be caused by: 1. Improper seating of sink flange (gasket choice, putty or tightening). 2. Support ring not tightened properly. 3. Defective cushion mount. If the leak is at the discharge elbow, leak may be caused by improper tightening of elbow flange screws. *Batch Feed does not include splash guard. 11 Consumer Support Troubleshooting Tips Installation Instructions Safety InstructionsOperating Instructions Disposer Warranty. Staple your receipt here. Proof of the original purchase date is needed to obtain service under the warranty. All warranty service provided by our Factory Service Centers, or an authorized Customer Care® technician. To schedule service, on-line, 24 hours a day, contact us at or call 800-GE-CARES. For The Period Of: GE Will Replace: One Year The entire disposer if there is a defect in materials or workmanship relating to functional parts From the date of the only (appearance parts are excluded). During this full one-year warranty, GE will also provide, original purchase free of charge, all labor charges related to replacing the original disposer along with the replacement disposer within the first year. Additional One Year Models GFC520F, GFC525F: If there is a defect in materials or workmanship relating to From the date of the functional parts only (appearance parts are excluded). During this one year extended limited original purchase warranty period, you will be responsible for all ins...

Herunterladen

Geben Sie zwei Ziffern: