Stimmen - 1, Durchschnittliche Bewertung: 4 ( )

Hersteller: GE Dateigröße: 466.78 kb Dateiname: Unterrichtssprache:

Do not be alarmed that the disposer slows down while grinding. The disposer is actually increasing torque (grinding power) and is operating under normal conditions. Batch Feed Models D. Before turning the disposer off, let the water and the disposer run for approximately 25 seconds after shredding stops. This assures that all waste is thoroughly flushed through the trap and drain. E. Do not use hot water while running the disposer. Cold water will keep food waste and fats solid so they can be flushed down the drain. Oval Handle Small A. Remove the sink stopper and turn on a medium flow of cold water. B. Scrape in food waste. C. Insert the stopper to start the disposer. One of the two small slots in the stopper base must line up with the switch plunger inside the neck of the disposer. NOTE: The oval shaped handle aligns with the 2 small slots in the stopper. Push down firmly to start. D. Run the disposer for 25 seconds after shredding stops. This assures that all waste is thoroughly flushed through the trap and drain. Lift the stopper to shut the disposer off. E. To fill the sink, insert the stopper so that the largest slot lines up with the switch plunger. The stopper can now be pushed down to seal the sink without starting the disposer. When the medium-sized slot in the stopper base is lined up with the Large Small Medium switch plunger, water can drain, but tableware, etc., cannot be accidentally dropped into the disposer. Operating instructions. Helpful Hints A. Be sure the disposer is empty before using the dishwasher so it can drain properly. B. You may want to leave the stopper in the drain when not in use to prevent utensils and foreign objects from falling into the disposer. C. The disposer is ruggedly built to give you years and years of trouble-free service. It will handle all normal food wastes--BUT it will not grind and dispose such items as tin cans, bottles and bottle caps, glass, china, leather, cloth, crockery, rubber, string, feathers, or clam or oyster shells. These are waste materials and belong in the trash can or trash compactor. Care and maintenance. D. TO SPEED UP FOOD WASTE DISPOSAL…Cut or break up large bones, melon rinds, grapefruit skins and corn cobs. Items such as large bones, fibrous husks like lima bean pods and corn husks require considerable cutting time. For this reason, you may prefer to place them in the trash can or trash compactor. THE MOTOR IS PERMANENTLY LUBRICATED FOR LIFE. DO NOT ATTEMPT TO LUBRICATE YOUR DISPOSER. The disposer is self cleaning and scours itself with each use. ¦ NEVER put lye or chemical cleaners into the disposer, as they cause serious corrosion of metal parts. ¦ Your disposer, except for the Batch Feed model, is equipped with a removable splash guard for ease of cleaning or replacement. Remove the splash guard by pulling it out from the top. To replace, insert into the sink flange and push down until it is properly seated. ¦ If an odor develops, run orange or lemon rinds through the disposer. A dozen ice cubes sprinkled with a little household scouring powder will also work. Before you call for service… GEAppliances.com Troubleshooting Tips Save time and money! Review the chart on this page first and you may not need to call for service. SAFETY NOTE: Before investigating, you must disconnect the power supply. WARNING! Before resetting, disconnect the power supply–please see SAFETY NOTE above. The overload control prevents the motor from operating should overloading occur. This feature protects your house wiring and your disposer. When overloaded, the motor will stop automatically. Problem Possible Causes What To Do Loud noises (other than those during grinding of bones and fruit pits) Silverware, bottle cap or other foreign object has fallen into the disposer. • Remove the splash guard* and remove the object with long-handled tongs. Replace the splash guard.* Disposer does not start Reset button has been tripped. Reset Button Serial No. Remove Splash Guard Turntable • With the splash guard* removed, check to see if the turntable will move freely using a broom handle. If the turntable moves freely, replace the splash guard* and check the reset button to see if it has been tripped. The reset button is red and located opposite the ...

Herunterladen

Geben Sie zwei Ziffern: