Stimmen - 3, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
Pass this manual on to whoever might acquire the appliance at a future date. - 1 ELECTRIC PASTRY PRESS KH 1191 Safety instructions To avoid potentially fatal electric shocks: • The voltage of the power source must match the details given on the plate affixed to the appliance. • Arrange for defective power plugs and/or cables to be replaced at once by qualified technicians or our Customer Service Department. • Do not expose the appliance to rain and never use it in a humid or wet environment. Ensure that the cable never gets damp or wet while the appliance is in use. To avoid the risks of fire or injuries: • This appliance is not intended for use by persons (including children) with reduced physical, sensorial or mental cabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. • Children should be supervised to ensure that they do not play with the appliance. • Ensure that the power plug is quickly accessible in cases of danger, and that there is no danger of tripping over the cable. Tips for safety: • In cases of danger, immediately remove the electrical plug from the socket. • Never use the appliance for purposes other than those for which it was designed. • Do not use the appliance outdoors. • Always be attentive! Always pay attention to what you are doing and act with common sense. Never use the appliance when you are distracted or don’t feel well. • Ensure that the appliance is correctly and completely assembled before taking it into use. • Remove the plug from the socket if the appliance is not being used, when removing components and for cleaning. Intended usage The Biscuit Shaper KH 1191 is intended for the shaping of biscuits and for decorating cakes etc. It is intended exclusively for private, not commercial, applications. Package contents Electrical Biscuit Shaper KH 1191 12 Motif discs 8 Nozzles Operating instructions Technical data Mains voltage: 220 - 240 V ~ 50Hz Power rating: 12 W Continuous operating time: 1 Minute Protection class: II - 2 CO Time The CO Time (Continuous Operation Time) details how long an appliance can be operated without the motor overheat-ing and becoming damaged. After the appliance has run for this period it must be switched off until the motor has cooled itself down. Appliance description q Direction switch w Start switch e Power cable with power plug r Motor unit t Threaded rod y Pusher u Container i Nozzle adapter with seal o Nozzles a Adapter lock s Lock ring d Motif discs Before the first use Take the Biscuit Shaper and all accessories from the packaging and remove all packaging material. Clean all of the components as described in the section „Cleaning and care“. Assembling the Biscuit Shaper Note: Remove the power plug e from the wall socket before assembling accessories. Inserting the threaded rod with pusher 1. Place the end of the threaded rod t in the motor unit r. Ensure that the pins inside the motor unit r engage with the guide rails on the threaded rod t. 2. Slide the threaded rod t with the pusher y as far as it will go into the motor unit r. Assembling the container Note: The container u must be fitted, otherwise the Biscuit Shaper will not function! 1. Slide the container u over the pusher y such that the guide rails inside the container u engage in the in notches on the pusher y. 2. Place the container u on the motor unit r so that the arrow on the container u points to the open lock on the motor unit r. 3. Turn the container u until the arrow on the container points to the closed lock on the motor unit r. 4. Insert the power plug e into a wall socket. 5. Place the direction switch q onto the arrow pointing downwards . 6. Press and hold the start button w until the pusher y has returned itself to the MAX marking. 7. Remove the power plug e from the wall socket. Assembling motif discs When the pusher y and container u are assembled: 1. Select the desire motif disc d. 2. Place the motif disc d into the lock ring s. 3. Place the lock ring s with the motif disc d onto the container u. 4. Turn the lock ring s in the direction of the arrow until it engages . - 3 Assembling the nozzles When the pusher y and container u are assembled: 1. Place the nozzle adaptor i into the lock ring s. The thread must point outwards. 2. Place the lock ring s with the nozzle adaptor i onto the container u. 3. Turn the lock ring s in the direction of the arrow until it engages . 4. Select a nozzle o. 5. Place the nozzle o on the nozzle adapter i. 6. Screw the adapter lock a over the nozzle o on the nozzle adapter i. 7. Adjust the lock device on the nozzle adaptor i to "CLOSE". Filling the container • The pastry to be processed must be at room temperature. If it is too soft, place it in the refrigerator for a short time. 1. Turn the container u so that the arrow points to the open lock . 2. Remove the container u from the motor unit r. Leave the threaded rod t ...