Stimmen - 2, Durchschnittliche Bewertung: 5
(
)
)
|
Anleitung Zusammenfassung
When installing a K00365 on a Manitowoc dispenser, remove the gray side trim pieces on the top sides of the dispenser. B. Place support angle on bin or dispenser, as shown, prior to adapter installation. Locate foam tape from kit in the positions on top of bin, as shown. Note locations of narrow and wide tape. C. Place adapters on bin or dispenser, as shown. Make sure the two holes from the support angle and adapters are aligned on the side. D. Using the adapters as templates, drill three 5/32” (4mm) holes, .500” (12.7mm) deep maximum, in bin or dispenser. Warning: Do not drill through interior liner. Attach with 10-24 x .500” screws provided. E. Apply foam tape to the edge of the adapters. Note: It is recommended to RTV intersections and along front inside edge of foam tape (see drawing) to prevent water tracking. 3. Refer to ice machine installation manual for ice machine installation procedures. Manitowoc Ice, Inc. 2110 South 26th Street, P.O. Box 1720, Manitowoc, WI 54221-1720 USA Telephone 920-682-0161, Fax - Sales: 920-683-7589, Service/Parts: 920-683-7585, Other: 920-683-7879 8016093 Web Site - 07/20/04...