Stimmen - 3, Durchschnittliche Bewertung: 4.3 ( )

Hersteller: FoodSaver Dateigröße: 356.8 kb Dateiname: 5f2c24a0-e874-40ca-844f-4400053e8455.pdf Unterrichtssprache:

Questions? Visit us at or call 1-800-777-5452 (U.S.) or 1-877-804-5383 (Canada). Get tips on vacuum packaging and order FoodSaver accessories. Accessory Hose Storage Accessory Hose Cancel Button Instant Seal Button Seal Control Switch (5-Position) Indicator Light Pulse Button Accessory Port Bag Cutter Roll Storage Compartment Removable Vacuum Channel Rubber Gasket Sliding Door to Vacuum Channel Sealing Strip Features QS.1505_GSpro_v3 6/29/04 11:13 AM Page 2 Getting Started Registering your appliance is quick and easy at How to Make a Bag from a FoodSaver Roll 1. Place item(s) in bag, allowing at least 3 inches of space between bag contents and top of bag. 2. Open appliance lid and place open end of bag down into Vacuum Channel (K). Make sure roll material is tucked backed into Roll Storage Compartment (J) or it could prevent the appliance from operating properly. 3. Close lid. 4. Set Seal Control Switch (E) to: to vacuum package using FoodSaver bags (medium seal time). to vacuum package moist and juicy foods such as raw meat (longer seal time). 5. To begin vacuum process, press down firmly on lid with both hands until motor starts, then release. Motor will continue to run. 6. When motor and Indicator Light (F) turn off, vacuum process is complete. Open lid and remove bag. Refrigerate or freeze if needed. (See FoodSaver Reference Guide for food safety tips.) Note: This appliance features a heavy-duty Sealing Strip (N) that can perform 50 consecutive seals without overheating. 3 2 1. Open appliance lid and place roll into Roll Storage Compartment (J). 2. Pull out enough bag material to hold item to be vacuum packaged, plus 3 inches. Close lid. 3. Turn Seal Control Switch (E) to Seal Only. 4. Press down firmly on lid with both hands until motor starts, then release lid. Motor and Indicator Light (F) will turn on as bag material is sealing. 5. When motor and light turn off, cut bag material by pressing down lightly on lid and sliding Bag Cutter (I) from one end of sliding channel to other end. 6. Open lid, remove bag, and tuck roll back into Roll Storage Compartment before vacuum packaging. Now you are ready to vacuum package with your new bag (see below). How to Vacuum Package with FoodSaver Bags Pull Out Bag Material Set Seal Control Switch Press and Release Lid Place Bag in Vacuum Channel Set Seal Control Switch Press and Release Lid QS.1505_GSpro_v3 6/29/04 11:13 AM Page 3 FoodSaver Accessories Accessories include FoodSaver Vacuum Packaging Canisters, Universal Lids, Jar Sealers and Bottle Stoppers. FoodSaver Accessory Guidelines 1. Always leave at least one inch of space between 4. For accessories with a large knob on lid, turn knob contents and rim. to Vacuum. Vacuum package using instructions 2. Wipe rim of canister, container or bottle to ensure below. When vacuum process is complete, turn it is clean and dry. knob to Closed before removing Accessory Hose. 3. Place lid on canister or container, or place stopper 5. For accessories without a large knob on lid, in bottle. vacuum package using instructions below. How to Vacuum Package with FoodSaver Accessories How to Open FoodSaver Accessories after Vacuum Packaging When motor and Indicator Light (F) turn off, Gently twist and remove Accessory Hose from To test vacuum, simply tug on accessory lid. It Insert Accessory Hose Set Seal Control Switch Press and Release Lid 1. Prepare container according to FoodSaver 5. Accessory Guidelines above. vacuum process is complete. 2. Insert one end of Accessory Hose (B) into 6. Accessory Port (H) on appliance. Insert other accessory and appliance. end into port on accessory. Twist gray tab while 7. inserting to ensure a tight fit. should not move. 3. Turn Seal Control Switch (E) to 1 . Note: For important tips on using accessories 4. To begin vacuum process, press down firmly on with different foods, please refer to the FoodSaver lid until motor starts, then release. Motor will Reference Guide. continue to run. FoodSaver Vacuum Packaging Canisters FoodSaver Jar Sealer with Mason Jars (without large knob on lid) For use with Ball® and Kerr® brand Mason jars. To release vacuum and open, push gray rubber IMPORTANT: Do NOT use screw bands when button on lid. vacuum packaging jars. To open, wedge spoon FoodSaver Bulk Canisters and Quick Marinators between Mason jar lid and highest part of threaded (with large knob on lid) and Universal Lids rim. Twist spoon gently to release vacuum. To release vacuum and open, turn knob on lid FoodSaver Bottle Stoppers to Open. To release vacuum and open, twist and pull up on Bottle Stopper. g QS.1505_GSpro_v3 6/29/04 11:13 AM Page 4 Additional Features Pulse Mode Pulse Mode allows you maximum control over the vacuum process for crushable items in bags. The Pulse feature operates similar to the Pulse button on a blender. After placing bag in Vacuum Channel (K) and closing lid, follow these instructions: 1. Set Seal Control Switch (E) to Pulse Mode. 2. Pr...

Herunterladen

Geben Sie zwei Ziffern: