Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
1. To protect against electrical shock do not immerse cord, plug or the motor base unit in water or other liquids. 2. Close supervision is necessary when any appliance is used by or near children. 3. Unplug from outlet when not in use and before cleaning. 4. DO NOT operate any appliance with a damaged cord or plug or if the appliance has been damaged in any manner. Return the appliance to the place of purchase or send back to company for repair or replacement as stated in this booklet in the warranty. 5. The appliance manufacturer does not recommend the use of accessory attachments. This may cause injuries. 6. DO NOT use outdoors. 7. DO NOT let the cord hang over the edge of table or counter tops or touch hot surfaces. 8. DO NOT place on or near a hot gas or electric burner, or in a heated oven. 9. Extreme caution must be used when moving this appliance. 10. DO NOT use the appliance for other than its intended use. 11. A unit that is plugged into an outlet should not be left unattended. 12. Check ice feed insert and ice shaving canister for presence of foreign objects prior to use. 13. Blades are extremely sharp. Use extreme caution when cleaning the ice shaving canister. 14. A short power supply cord is provided to reduce the risk resulting from becoming entangled or tripping over a long cord. 15. Longer detachable power supply cords can be used if care is exercised in their use. 16. The marked electrical rating of an extension cord should be at least as great as the electrical rating of the appliance. 17. This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electrical shock, this plug is intended to fit into a polarized outlet only one way. SAVE THESE INSTRUCTIONS! ENGLISH 2 IMPORTANT PRECAUTIONS Appliance Specifications: 120 Volts 60HZ 9 Amps 35 Watts ETL Approved Important Precautions to Remember: A. NEVER immerse in water. B. NEVER use near water. C. NEVER use an abrasive sponge, cloth or scouring pad on the unit. D. NEVER leave unit unattended while in use. E. Unplug unit from outlet when not in use and when cleaning. F. DO NOT operate this appliance with a damaged cord or plug or in the event the appliance ever malfunctions. G. This unit is NOT A TOY. H. This appliance is not intended for use by young children or infirm persons without supervision. INTRODUCTION Thank you for purchasing The RETRO SNOW CONE MACHINE... This nostalgic looking snow cone maker resembles the popular Retro designs of the 1950’s. This snow cone maker is only designed in appearance to look like the nostalgic design style; however, it is a technologically advanced snow cone maker. The RETRO SNOW CONE MACHINE.. uses ice cubes from your freezer to create: • Snow Cones • Slush’s • Smoothies, Low Fat Snacks The RETRO SNOW CONE MACHINE.. is designed for kitchen use but can be used anywhere such as; • Family Room • Dorm Rooms • Office • Club House And more… Now you can enjoy icy cool snow cones and more to snack on… • Watching TV or a movie at home • Parties • Listening to music • As a low fat treat And more… ENGLISH 3 INTRODUCTION The RETRO SNOW CONE MACHINE.. is easy to use, just follow these simple instructions. After Taking the Unit Out Of the Box 1. Your RETRO SNOW CONE MACHINE.. is already fully assembled, but has three separate bonus pieces. • 1 side cone shelf • 2 plastic cone holders (Paper cones not provided) • 1 plastic shaved ice scoop 2. Before first use, lift off the clear safety power control lid, and remove the ice shaving canister. Remove the top housing lid off of the body and wipe clean the inside of the shaved ice collection chamber with a non-abrasive moist sponge, towel or cloth and then dry with a non-abrasive soft towel or cloth. BREAKDOWN of parts ILLUSTRATION A E. Shaved Ice Collection Chamber A. Housing Top lid F. Ice Feed insert B. Cone Holders G. Ice shaving Canister C. Shaved ice scoop H. Locking cap for Ice shaving canister D. Side cone shelf H. Clear Safety power control lid 3. After cleaning the inside of the shaved ice collection chamber, put the housing top lid back on the ice collection chamber and base unit. 4. Locate the Ice Shaving canister. Unscrew and remove the center locking cap (This cap has “LOCK and UNLOCK” with directional arrows, clearly marked on the top) Separate the Ice Feed Insert from the Ice Shaving Canister. Carefully wash these parts in warm soapy water. Use extreme caution when cleaning and handling the Ice Shaving Canister. Blades are very sharp! Rinse and dry with a soft clean cloth. Reassemble the Ice Shaving Canister and lock the center locking cap securely. Return the Ice Shaving Canister to the receptacle hole in the top housing lid. Wash and dry the Clear Safety power control lid, and reposition over the Ice Shaving Canister. 5. Attach the Side Cone Shelf. NOW, you are ready to enjoy cool, refreshing icy snacks from your RETRO SNOW CONE MACHINE™. ENGLISH 4 USING YOUR RETRO SNOW CONE MACHINE™ First, find a stable surface near an e...