Stimmen - 3, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
44110 Enodis Phone: (216) 481-4900 Fax: (216) 481-3782 Visit our web site at SE95052 FOR THE USER IMPORTANT! ENSURE KETTLE IS AT ROOM TEMPERATURE AND PRESSURE GAUGE IS SHOWING ZERO OR LESS PRESSURE PRIOR TO REMOVING ANY FITTINGS. FOR YOUR SAFETY WARNING: Improper installation, adjustment, alteration, service or DO NOT STORE OR USE maintenance can cause property GASOLINE OR ANY OTHER damage, injury or death. Read the FLAMMABLE LIQUIDS AND installation operating and VAPOURS IN THE VICINITY maintenance instructions OF THIS OR ANY OTHER thoroughly before installing or APPLIANCE. servicing this equipment. IMPORTANT POST IN A PROMINENT LOCATION, INSTRUCTIONS TO BE FOLLOWED IN THE EVENT THE USER SMELLS GAS.THIS INFORMATION SHALL BE OBTAINED BY CONSULTING YOUR LOCAL GAS SUPPLIER. KEEP APPLIANCE AREA FREE AND CLEAR FROM COMBUSTIBLES. DO NOT OBSTRUCT THE FLOW OF COMBUSTION AND VENTILATION AIR. ALL SERVICE MUST BE PERFORMED BY A QUALIFIED CLEVELAND RANGE TECHNICIAN. RETAIN THIS MANUAL FOR YOUR REFERENCE. TABLE OF CONTENTS Installation Inspection ............................................1 Shipping Damage Instructions.............................1 General...............................................1 Clearance Requirements.................................1 Installation............................................1 Gas..................................................1 Electrical.............................................2 Ventilation.............................................2 Water................................................2 Installation Checks......................................2 Cleaning..............................................2 Specification Drawing.................................3-4 Operating Instructions General Parts Drawing..................................5 Operating the Kettle.....................................6 Approximate Boiling Times...............................6 Cleaning Instructions Care & Cleaning.......................................7 Recommended Cleaners..................................7 Service Parts Warranty..............................................8 Faucet Assembly........................................8 Component Mounting Plate...............................9 Burner Assembly......................................10 2” Tangent Draw-Off Valve..............................11 General Assembly - Tilting Models.....................12-14 - Stationary Models...................15-16 Console Controls......................................17 Hinge Assembly.......................................18 Maintenance Inspection & Maintenance Check List.....................19 Safety Inspection Checklist............................20-21 - Safety Valve.......................................20 - Safety Thermostat..................................21 - Low Water Probe...................................21 - Operating Thermostat...............................21 Lubrication Procedure..................................22 Hinge Adjustment Instructions............................22 Calibrating Procedure..................................23 Pressure Relief Valve Periodic Testing Procedure.............23 Reservoir Fill Procedures...............................24 Kettle Jacket Filling & Draining Procedures................25 Kettle Venting Instructions...............................26 Vacuum Leak Test......................................26 Repairing Leaks in Steam Jacketed Kettle Fittings............27 Wiring Diagram.......................................27 Sequences of Operation..............................28-31 Symbol Legend.....................................32-33 INSTALLATION INSPECTION Before unpacking visually inspect the unit for evidence of damage during shipping. If damage is noticed, do not unpack the unit, follow shipping damage instructions. SHIPPING DAMAGE INSTRUCTIONS If shipping damage to the unit is discovered or suspected, observe the following guidelines in preparing a shipping damage claim. 1. Write down a description of the damage or the reason for suspecting damage as soon as it is discovered. This will help in filling out the claim forms later. 2. As soon as damage is discovered or suspected, notify the carrier that delivered the shipment. 3. Arrange for the carrier's representative to examine the damage. 4. Fill out all carrier claims forms and have the examining carrier sign and date each form. GENERAL Installation of the kettle must be accomplished by qualified installation personnel working to all applicable local and national codes. Improper installation of product could cause injury or damage. This equipment is built to comply with applicable standards for manufacturers. Included among those approval agencies are: UL, A.G.A., NSF, ASME/N.Bd., CSA, CGA, ETL, and others. Many local codes exist, and it is the responsibility of the owner/installer to comply with these codes...