Stimmen - 4, Durchschnittliche Bewertung: 3.8
(
)
)
|
Anleitung Zusammenfassung
1 "SHARP AL-1641CS" will appear in the "Found New Hardware Wizard" dialog box. Select "Install the software automatically (Recommended)" and click the "Next" button. The "Hardware Installation" dialog box will appear. Click the 2 "Continue Anyway" button. When installation of the driver is completed, click the "Finish" 3 button to finish the scanner driver installation. 12 Begin installation of the printer driver. "SHARP AL-1641CS" will appear in the "Found New Hardware 1 Wizard" dialog box. Select "Install the software automatically (Recommended)" and click the "Next" button. The "Hardware Installation" dialog box will appear. Click the 2 "Continue Anyway" button. When installation of the driver is completed, click the "Finish" 3 button to finish the printer driver installation. You have completed the installation of all the software. Installing onto Windows 98/Me/2000 (USB interface) Before starting the installation, make sure the USB interface cable is not connected to the MFP. Insert the supplied CD-ROM into your CD-ROM drive. 1 2 Double-click "My Computer" ( ), and then double-click the CD-ROM ( ) icon. When any of "Hardware Found", or "Found New Hardware Wizard" messages appear during the software installation, be sure to click the "Cancel" button. 3 Double-click the "setup" ( ) icon. If the language selection screen appears after you double click the "setup" icon, select the language you wish to use and click the "Next" button. (Normally, the correct language is selected automatically.) 4 Select the software packages to be installed, and then click the "Next" button. The software packages with checkmark ( on the list on the screen will be installed. Click the "Display README" button to show the information on the selected package. If the following screen appears, click the "OK" button. Review the contents in "BEFORE INSTALLATION" (p.20), and then select the appropriate driver software packages to be installed. ) 5 Review the software packages to be installed on the screen, and then click the "Start" button. The software packages to be installed will be displayed on the screen. If inappropriate packages are displayed, click the "Back" button to select appropriate packages again. 6 Copying files for MFP driver installation. After confirming the message in the "Welcome" window, click the 1 "Next" button. A dialog box appears asking you to verify that the interface cable 2 is not connected to the MFP. Make sure that the interface cable is not connected and click the "Next" button. Click the "Next" button in the dialog box 3 showing the files to be copied for installation of the MFP driver. The setup program will start to copy the files. In Windows 2000, if the following screen appears while the files are being copied (the message may appear more than once), click "Yes" in Windows 2000. The following screen appears when all of the 4 files for the USB interface connection have been copied. If you are not using a parallel interface cable for connection to the MFP, please click the "No" button. When the "The MFP driver installation is 5 complete." dialog box appears, click the "OK" button. The Button Manager installer will start. 7 Begin installation of the Button Manager (This step will start if it was selected in step 4). After confirming the message in the "Welcome" window, click the 1 "Next" button. Read the message in the "Please read the following information." 2 window, and then click the "Next" button. When a message appears that lets you specify the location for the 3 software to be installed, click the "Next" button. 4 If the program displays "Do you want the Button Manager added to Windows Startup?", check "Yes" and click the "OK" button. The setup program will start to copy the files. Click the "Finish" button when the message to inform you of the 5 completion of the installation appears. The Sharpdesk installer will start. 8 Begin installation of the Sharpdesk (This step will start if it was selected in step 4). After confirming the message in the "Welcome to Sharpdesk 1 installation" window, click the "Next" button. Read the message in the "Information" window, and then click the 2 "Next" button. When the "Choose Destination Location" window appears, click 3 the "Next" button. When the "Select Program Folder" window appears, click the 4 "Next" button. The setup program will start to copy the files. If the dialog box asking "If you have TIF files saved using Photoshop or Imaging for Windows you should hit Skip" appears, answer the question to continue the Sharpdesk installation. 9 Click the "Finish" button when the message to inform you of the completion of the installation appears. 54 Click the "Close" button when the message to inform you of the completion of the installation appears. When the "Now connect the MFP interface cable to the PC." dialog box or "After Windows system restarts..." dialog box appears, click the "OK" button. After the installation, a message to restart your computer may...