Stimmen - , Durchschnittliche Bewertung:
(
)
)
Hersteller: Sharp
Dateigröße: 953.23 kb
Dateiname: 50b88de1-ccfe-4503-be8e-903829890b3d.pdf
Unterrichtssprache:
Das Dokument wird geladen, bitte warten
 |
Das Dokument wird geladen, bitte warten
Anleitung Zusammenfassung
A letter and a number appear alternately. 38 27 38 26 31 26 13 — 31 — — DISPLAYING TOTAL NUMBER OF COPIES Use the following procedure to display the total number of copies. 1 Press the clear ( ) key to reset the display to zero. 2 Press and hold down the clear ( ) key for approximately 5 seconds.The total number of copies will appear in two steps, each with three digits. Example: Total number of copies is 1,234. Be sure to use only genuine SHARP parts and supplies. Copier 35 AUTOMATIC EXPOSURE ADJUSTMENT The automatic exposure level can be adjusted to suit your copying needs. 1 Press the exposure mode selector key to select the photo ( ) mode. Press and hold down the exposure mode selector key for approximately 5 seconds. 2 The photo ( ) indicator will go out and the AUTO indicator will begin to blink. One or two exposure indicators corresponding to the automatic exposure level which has been selected will light up. Press the light ( ) or dark ( ) key to lighten or darken the automatic exposure 3 level as desired. If exposure level 2 is selected, the two left-handmost indicators for that level will light up simultaneously. Also, if level 4 is selected, the two right-handmost indicators for that level will light up simultaneously. Copier trouble? Press the exposure selector key. The AUTO indicator will stop blinking and light up 4 steadily. This automatic exposure level will remain in effect until you change it again by this procedure. 36 7 APPENDIX 7 APPENDIX S Type Digital laser copier/printer, desk-top type Copy system Dry, electrostatic transfer Originals Sheets, bound documents Original size Max. 10" x 14" Copy sizes 8-1/2" x 14" to 3-1/2" x 5-1/2" (Feed copy paper lengthwise only.) Image loss: Max. 5/32" (4 mm) (leading and trailing edges) Max. 11/64" (4.5 mm) (along the other edges in totals) Copy speed 13 copies/min. Continuous copying Max. 99 copies; subtractive counter First-copy time (Approximately) 9.6 seconds (normal copying mode) Copy ratio Variable: 50% to 200% in 1% increments (total 151 steps) Fixed: 50%, 64%, 78%, 100%, 129%, 200% Exposure system Moving optical source, slit exposure (stationary platen) with automatic exposure Copy paper feed One paper tray with automatic feed (250 sheets); one single-sheet manual bypass Fusing system Heat rollers Development system Magnetic brush development Light source Xenon lamp Resolution Scan: 400 dpi Output: 600 dpi Gradation Scan: 256 levels Output: 2 levels Memory 6MB Power supply AC 120V (±10%), 60 Hz (±2%) Power consumption 1,000 W Overall dimensions 23.9" (W) x 17.5" (D) (607 mm (W) x 445 mm (D)) Weight Approx. 39.7 lbs. (18 kg), TD and drum cartridges included Copier dimensions 20.4" (W) x 17.5" (D) x 11.5" (H) (518 mm (W) x 445 mm (D) x 293 mm (H)) Operating conditions Temperature: 50°F to 86°F (10°C to 30°C) Humidity: 20% to 85% Noise level Sound Power Level LWA (1B=10dB) Copying: 6.6 [B (A)], Standby: Background noise level Sound Pressure Level LPA (bystander positions) Copying: 40 [dB (A)], Standby: Background noise level Noise emission measurement in accordance with ISO 7779. Appendix First-copy time may differ depending on operating conditions, such as power-supply voltage and room temperature. As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units. 37 SUPPLY PART NUMBERS AND STORAGE When ordering supplies, please use the correct part numbers as listed below. Be sure to use only genuine SHARP parts and supplies. For best copying results, be sure to use only SHARP Genuine Supplies which are designed, engineered, and tested to maximize the life and performance of SHARP copiers. Look for the Genuine Supplies label on the toner package. Supply list Supply Part number Usable life TD cartridge AL-100TD Approx. 6,000 sheets* AL-110TD Approx. 4,000 sheets Drum cartridge AL-100DR Approx. 18,000 sheets * Based on copying onto letter-type paper at 5% toned area (The life of the TD cartridge which has been included in the copier at the factory is approximately 2,000 sheets.) 7 Proper storage 1. Store the supplies in a location that is: . clean and dry, . at a stable temperature, . not exposed to direct sunlight. 2. Store copy paper in the wrapper and lying flat. . Paper stored out of the wrapper or in packages standing on end may curl or get damp, resulting in paper misfeeds. Appendix 38 MOVING INSTRUCTIONS MOVING INSTRUCTIONS When moving this copier, be sure to remove the TD cartridge in advance. 1 Turn the power switch off and disconnect the power cord. 2 Open the side cover while pressing the side cover open button. both sides of the front cover to open the cover. Push gently on 3 Gently pull the TD cartridge out while pressing the lock release button. See page 27, TD CARTRIDGE REPLACEMENT....