Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
Regulatory information
The power output of the wireless device or devices that may be embedded in
In environments where the risk of interference to other devices or
your printer is well below the RF exposure limits as known at this time. Because
services is harmful or perceived as harmful, the option to use a wireless
the wireless devices (which may be embedded into your printer) emit less
device may be restricted or eliminated. Airports, Hospitals, and
energy than is allowed in radio frequency safety standards and
Oxygen or flammable gas laden atmospheres are limited examples
recommendations, manufacturer believes these devices are safe for use.
where use of wireless devices may be restricted or eliminated. When in
Regardless of the power levels, care should be taken to minimize human contact
environments where you are uncertain of the sanction to use wireless
during normal operation.
devices, ask the applicable authority for authorization prior to use or
turning on the wireless device.
As a general guideline, a separation of 20 cm (8 inches) between the wireless
device and the body, for use of a wireless device near the body (this does not
Every country has different restrictions on the use of wireless devices.
Since your system is equipped with a wireless device, when traveling
include extremities) is typical. This device should be used more than 20 cm (8
between countries with your system, check with the local Radio
inches) from the body when wireless devices are on and transmitting.
Approval authorities prior to any move or trip for any restrictions on
This transmitter must not be collocated or operation in conjunction with any
the use of a wireless device in the destination country.
other antenna or transmitter.
If your system came equipped with an internal embedded wireless
Some circumstances require restrictions on wireless devices. Examples of
device, do not operate the wireless device unless all covers and shields
are in place and the system is fully assembled.
common restrictions are listed below:
Wireless devices are not user serviceable. Do not modify them in any
way. Modification to a wireless device will void the authorization to
Radio frequency wireless communication can interfere with
use it. Contact manufacturer for service.
equipment on commercial aircraft. Current aviation regulations
require wireless devices to be turned off while traveling in an airplane.
Only use drivers approved for the country in which the device will be
IEEE 802.11 (also known as wireless Ethernet) and Bluetooth
used. See the manufacturer System Restoration Kit, or contact
communication devices are examples of devices that provide wireless
manufacturer Technical Support for additional information.
communication.
5. Appendix
125
...