Login:
Stimmen - , Durchschnittliche Bewertung: ( )

Anleitung AGFA, modell 2100

Hersteller: AGFA
Dateigröße: 282.87 kb
Dateiname: 72b98ad1-cede-4e95-9aae-e4279a9ce64d.pdf

Unterrichtssprache:en

Das Dokument wird geladen, bitte warten
Das Dokument wird geladen, bitte warten

Anleitung Zusammenfassung


Digital Equipment Corporation assumes no responsibility for any errors that may appear in this document. Any software described in this document is furnished under a license and may be used or copied only in accordance with the terms of such license. No responsibility is assumed for the use or reliability of software or equipment that is not supplied by Digital Equipment Corporation or its affiliated companies. Restricted Rights: Use, duplication, or disclosure by the U.S. Government is subject to restrictions as set forth in subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause at DFARS 252.227–7013. Copyright ©1990 Digital Equipment Corporation All rights reserved. Printed in U.S.A. The Reader’s Comments form at the end of this document requests your critical evaluation to assist in preparing future documentation. The following are trademarks of Digital Equipment Corporation: BASIC Service, DECdirect, DEClaser, DECmailer, DECmate, DECserver, DECservice, DECstation, EDT, LN03, MicroVAX, PRO, Rainbow, ReGIS, VAX, VAX DOCUMENT, VAXmate, VAXstation, VAX/VMS, VMS, WPS-PLUS, VT, and the DIGITAL Logo. The following are third-party trademarks: BITSTREAM is a registered trademark of Bitstream, Inc. Centronics is a trademark of Centronics Data Computer Corporation. GC Times is a trademark of AGFA Compugraphic Corporation. CG Triumvirate is a trademark of AGFA Compugraphic Corporation. IBM is a registered trademark of International Business Machines Corporation. IBM-PC is a trademark of International Business Machines Corporation. ITC Souvenir is a registered trademark of International Typeface Corporation. PostScript is a registered trademark of Adobe Systems, Inc. Tektronix is a registered trademark of Tektronix, Inc. S1384 This document was prepared using VAX DOCUMENT, Version 1.2. FCC NOTICE: This equipment generates and uses radio frequency energy and if not installed and used properly, that is, in strict accordance with the manufacturer’s instructions, may cause interference to radio and television reception. It has been type tested and found to comply with the limits for a Class B computing device in accordance with the specifications in Subpart J of Part 15 of FCC Rules, which are designed to provide reasonable protection against such interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following methods. – Reorient the receiving antenna. – Relocate the computer or peripheral with respect to the receiver. – Move the computer or peripheral away from the receiver. – Plug the computer or peripheral into a different outlet so that they are on different branch circuits than the receiver. If necessary, the user should consult the dealer or an experienced radio /television technician for additional suggestions. The user may find the booklet How to Identify and Resolve Radio/TV Interference Problems, prepared by the Federal Communications Commission helpful. This booklet is available from the U.S. Government Printing Office, Washington DC, 20402, Stock No. 004-000-00345-4. To meet FCC requirements a shielded parallel cable is required to connect the device to a personal computer or other Class B device. Contents Preface Chapter 1 Printer Components 1.1 FunctionsofthePrinterComponents .................. 1–1 1.2 RequiredOperatingSpace ........................... 1–8 Chapter 2 Operating Information 2.1 PoweringthePrinterOn ............................ 2–1 2.2 PoweringthePrinterOff ............................ 2–3 2.3 OpeningtheTopCover.............................. 2–4 2.4 ClosingtheTopCover .............................. 2–6 2.5 SelectingtheOutputTray ........................... 2–7 2.5.1 Selecting the Top Output Tray (Facedown Print) . . . ..... 2–8 2.5.2 Selecting the Rear Output Tray (Faceup Print) ......... 2–9 2.6 LoadingPaper .................................... 2–10 2.6.1 AddingPapertotheCassette....................... 2–11 2.7 FeedingMediaManually ............................ 2–14 2.7.1 Manually Feeding Paper, Labels, and Transparencies .... 2–15 2.8 UsingDuplexPrinting.............................. 2–21 2.9 FeedingEnvelopesManually ......................... 2–27 2.9.1 FeedingEnvelopes............................... 2–27 2.10 AdjustingthePrintDensity.......................... 2–33 2.11 PrintingtheEngineTestPrint........................ 2–36 2.12 PrintingTestPrintA............................... 2–39 2.13 PrintingTestPrintB............................... 2–43 2.14 PrintingtheFontList .............................. 2–46 2.15 UsingControlRepresentationMode ................... 2–49 2.15.1 Entering Control Representation Mode . . ............. 2–49 iii 2.16 ResettingthePrinter...............

Bewertungen



Bewerten
Vorname:
Geben Sie zwei Ziffern:
capcha





Kategorien