Stimmen - 4, Durchschnittliche Bewertung: 4.5
(
)
)
|
Anleitung Zusammenfassung
• Press SPACE to input spaces. • If you input a wrong character, press BS to delete it and input again. See page 11 for other details on editing text. 3. When you reach the end of a line of text, press B (the L cursor key) to input a newline mark. • A newline operation is indicated on the display by the B symbol.This shows where you changed lines. 4. Input the characters in the second line. 5. To print the text that you input, press PRINT. For details on printing, see page 14. About the CODE key… The CODE key makes it possible to input punctuation needed for a number of different languages.The following shows the key operations you should use for each of the characters formed using the CODE key. Key Operation Input CODE 1 . CODE 2 . Example: To input a. CODE 1 A Special Symbols You can also access a menu of special symbols by pressing FUNCTION 6 (SYMBOL). To input special symbols Example: To input the special symbol #. 1. With the cursor at the location where you want to input a special symbol, press FUNCTION 6 (SYMBOL). ,.: ; • The symbol that is underlined on the display is the one that is currently selected. 2. Use the H, J, K and L cursor keys to move the underlining to the symbol you want. • Not all of the available symbols fit on the display. The menu will scroll when you press the cursor keys. • In this example, underline #. 3. After you underline the symbol you want, press SET. • This returns to the input screen, with the symbol you selected input at the location where the cursor was located when you displayed the symbol list. IO# Part 4 Deleting and Inserting Characters This section describes everything you need to know about deleting and editing characters you have already input. Moving the Cursor Use the cursor keys to move the cursor around the display and position it for deleting and editing characters. To move the cursor • Press H to move the cursor to the left, and J to move the cursor to the right. • Press FUNCTION and then H to make the cursor jump to the beginning (far left) of the characters on the display. • Press FUNCTION and then J to make the cursor jump to the end (far right) of the characters on the display. • Holding down the H or J cursor key moves the cursor at high speed. Deleting Individual Characters You can delete individual characters with either the BS key or the DEL key (which is the K cursor key).The only difference between the operation of these two keys is the location of the cursor. To delete characters using the BS key Example: To change the word “commmputer” to “computer”. 1. Use H and J to move the cursor under “p”. pute 2. Press BS twice to delete the two m’s to the left of the cursor, shifting “puter” to the left as you do. 3. Press FUNCTION and then J to jump back to the end of the characters for more input. To delete characters using the DEL key Example: To change the word “commmputer” to “computer”. 1. Use H and J to move the cursor under the first (far left) “m”. 2. Press DEL twice to delete the two m’s at the cursor’s position, shifting “mputer” to the left as you do. 3. Press FUNCTION and then J to jump back to the end of the characters for more input. Clearing the Display Use the following procedure to clear all input text from the display. To clear the display Press FUNCTION and then BS (CLS). At this time the message CLS? appears on the display to confirm that you want to clear the display. Press SET to clear or ESC to abort the operation without clearing anything. Text Editing You can use the following procedures to edit text on the display. To insert new characters Example: To change the text “ABCDEF” to “ABCXYZDEF”. 1. With the original text on the display, move the cursor under the letter “D”. 2. Input the new characters (XYZ). • Inputting the new characters causes them to be inserted at the cursor position. The existing characters are opened up to make room for the new characters. Tochange existing characters to different ones Example: To change the text “ABCDEF” to “XYZDEF”. 1. With the original text on the display, use either the BS key or DEL key to delete the characters to be changed (ABC). • Remember to use the correct cursor location for the key you plan to use to delete the characters. See page 11 for details. 2. Input the new characters (XYZ). Part 5 Character Size, Text Effects and Character Styles This part of the manual explains how to change the size of characters. It also tells you how to assign text effects like underlining, shading, and box printing. It also tells you how to assign text effects like underlining, shading, and box printing, and how to select character styles like normal, outline, shadow, and raised. Character Size The following table shows the six character sizes that are available. Character Size Indicator Actual Size (mm) 1.1 3.3 1.2 3.6 1.3 3.9 2.1 6.3 2.2 6.6 2.3 6.9 Character size changes are applied to printed text only. The size of the displayed text does not change. Important! • Any character size specification y...