Stimmen - 4, Durchschnittliche Bewertung: 3.5
(
)
)
|
Anleitung Zusammenfassung
Paper tray recommendations • Make sure the paper lies flat in the tray. • Do not remove trays while the printer is printing. • Do not load trays, the multipurpose feeder, or the envelope feeder while the printer is printing. Load them prior to printing, or wait for a prompt to load them. • Do not load too much paper. Make sure the stack height does not exceed the indicated maximum height. • Make sure the guides in the paper trays, multipurpose feeder, or envelope feeder are properly positioned and are not pressing too tightly against the paper or envelopes. • Push all trays in firmly after loading paper. Paper recommendations • Use only recommended paper or specialty media. • Do not load wrinkled, creased, damp, bent, or curled paper. • Flex, fan, and straighten paper before loading it. • Do not use paper that has been cut or trimmed by hand. • Do not mix paper sizes, weights, or types in the same stack. • Make sure all sizes and types are set correctly in the printet control panel menuu • Store paper per the manufacturer's recommendations. Envelope recommendations • To reduce wrinkling, use the Envelope Enhance menu in the Paper menu. • Do not feed envelopes that: – Have excessive curl or twist – Have windows, holes, perforations, cutouts, or embossing – Have metal clasps, string ties, or folding bars – Have an interlocking design – Have postage stamps attached – Have any exposed adhesive when the flap is in the sealed or closed position – Have bent corners – Have rough, cockle, or laid finishes – Are stuck together or damaged in any way Understanding jam numbers and locations When a jam occurs, a message indicating the jam location appears. Open doors and covers and remove trays to access jam locations. To resolve any paper jam message, you must clear all jammed paper from the paper path. The following table lists the jams that can occur and the location of each jam: Jam numbers Area 1 200–202 Printer 2 230–239 Duplex unit 3 240–249 Paper tray 4 250 Multipurpose feeder 5 260 Envelope feeder 6 270–279 Optional output bin 7 280–282 Finisher 8 283 Stapler 290–294 ADF cover 200 and 201 paper jams 1 Touch Status/Supplies to identify the location of the jam. 2 Lower the multipurpose feeder door. 1 3 Push the release latch, and then open the front cover. 5 Place the print cartridge aside. Warning—Potential Damage: Do not leave the cartridge exposed to light for extended periods. Warning—Potential Damage: The jammed paper may be covered with unfused toner which can stain garments and skin. 6 Remove the jammed paper. CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching. Note: If the paper is not easy to remove, then open the rear door and remove the paper from there. 7 Align and reinstall the print cartridge. 8 Close the front cover. Close the multipurpose feeder door. 10 Touch Continue 4 Lift and pull the print cartridge out of the printer. Warning—Potential Damage: Do not touch the photoconductor drum on the underside of the cartridge. Use the cartridge handle whenever you are holding the cartridge. 202 paper jam Touch Status/Supplies to identify the location of the jam. If the paper is exiting the printer, then pull the paper out, and then touch Continue If the paper is not exiting the printer: 1 Pull down the top rear door. 2 Remove the jammed paper. 3 Close the top rear door. 4 Touch Continue 230–239 paper jams 1 Touch Status/Supplies to identify the location of the jam. 2 Pull the standard tray out. 2 3 Pull down the bottom rear door. 240–249 paper jams 250 paper jam 1 Touch Status/Supplies to identify the location of the jam. 1 Touch Status/Supplies to identify the location of the jam. 2 Pull the standard tray out. 2 Remove the paper from the multipurpose feeder. 4 Push the tab down. 5 Remove the jammed paper. 6 Close the bottom rear door. 7 Insert the standard tray. 8 Touch Continue 3 Remove any jammed paper, and then close the tray. 4 Touch Continue 5 If the jam message persists, then pull out any optional trays. 6 Remove the jammed paper, and then insert the trays. 7 Touch Continue 3 Flex the sheets of paper back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface. 4 Load the paper into the multipurpose feeder. 3 5 Slide the paper guide toward the inside of the tray until it lightly rests against the edge of the paper. 6 Touch Continue 260 paper jam Touch Status/Supplies to identify the location of the jam. The envelope feeder feeds envelopes from the bottom of the stack; the bottom envelope will be the one that is jammed. 1 Lift the envelope weight. 2 Remove all envelopes. 3 If the jammed envelope has entered the printer and cannot be pulled out, then lift the envelope feeder up and then out of the printer, and then set it aside. 4 Remove the envelope from the printer. Note: If you cannot remove the envelope, then the print cartridge will ...