Stimmen - 4, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
The image density is too dark. Adjust the image density. . P.28 “Adjusting Copy Image Density”. If you select Black & White Copy mode or Single Color mode, place a black paper in the backside of the original and select Auto Image Density mode. Lighten the background density. . P.142 “Image Adjustment”. A shadow is copied when copying a pasted original. The image density is too dark. Adjust the image density. . P.28 “Adjusting Copy Image Density”. Adjust the background density. . P.142 “Image Adjustment”. Place the original in a different direction. Put mending tape on the bound part. Copies are too light. The original has a low contrast image. Adjust the image density. . P.28 “Adjusting Copy Image Density”. The image density is too light. Damp or rough grain paper is used Use dry paper without rough grain. 189 Troubleshooting Problem Cause Action Copy image is not clear. The original image type is not selected properly. Select the proper original image type. . P.28 “Adjusting Copy Image Density”. Adjust the sharpness of the image with the Soft/Sharp function. . P.142 “Image Adjustment”. The same copy area is dirty whenever making copies. The exposure glass or document feeder belt is dirty. Clean them. . P.230 “Maintaining Your Machine”. When using Enlarge mode, shadows appear on the margins of copies. Shadows may appear because the whole surface area of the exposure glass was scanned in. Select the Border Erase mode. . P.86 “Erase”. Copies are blank or parts of the image are not copied. The original is not place correctly. Place the originals correctly. An improper paper size is selected. Select the proper paper size. The selected reproduction ratio does not match the paper size. Select the proper reproduction ratio. A moire pattern is produced on copies as shown in the illustration. .... ;;; ............ ........ ; yyyyy yyyyyy yyyyyR Text mode is selected. Select Auto Original Type Select mode or Photo mode. . P.36 “Selecting the Original Image Type”. The line images of the original might be overlapped with each other. Place the original on the exposure glass at a slight angle. Adjust the sharpness of the image. . P.142 “Image Adjustment”. Color tone of copies is different from that of originals. The color balance is not set properly. Adjust the Color Balance. . P.131 “Color Balance Adjustment”. Perform the Auto Color Calibration (A.C.C.). . P.142 “Image Adjustment”. Color tone of copies is completely different from that of originals. Unsuitable color setting. Perform Auto Color Calibration (A.C.C.). . P.142 “Image Adjustment”. If you cannot correct the problem by performing Auto Color Calibration, contact your service representative. 190 If You Cannot Make Copies as You Want Problem Cause Action Letter parts and photo parts of an original are not separated correctly. An original has screen letters or low density letters. Adjust the Text/Photo Sensitivity to a “Text” level. . P.142 “Image Adjustment”. An original has a high contrast photo. Adjust the Text/Photo Sensitivity to a “Photo” level. . P.142 “Image Adjustment”. An original has a photo having a sequence of thin lines with regular thin spaces. Color parts of an original are copied in black in Auto Color Select mode. The original image contains small or thin color parts. Adjust the A.C.S. Sensitivity to a “Full color” level. . P.142 “Image Adjustment”. Non-color parts of an original are copied in color in Auto Color Select mode. The machine might detect some black and white screen images (such as from newspa- Select Black & White mode. . P.31 “Black & White copy mode”. per) as a full color original. Adjust the A.C.S. Sensitivity to a “B&W” level. . P.142 “Image Adjustment”. A copy image is blurred. The image density is too light. Adjust the image density. . P.28 “Adjusting Copy Image Density”. An improper kind of paper is loaded. Load the right kind of paper in the paper tray. Note . Copies might be blurred if you copy onto rough grain, coated, or damp paper. Toner is running out. Add toner. . P.196 “D Changing The Toner Cartridge”. In Margin Adjustment mode, parts of the original image are not copied. The margin is set too wide. Set the narrow margin with the user tools. . P.217 “General Features”. In Repeat Image mode, the original image is not copied repeatedly. An improper reproduction ratio is selected. Select the proper reproduction ratio. If you cannot correct the problem by taking the above actions, please contact your service representative. 191 Troubleshooting B Loading Paper Reference For details about paper sizes that can be set, . P.235 “Mainframe”. Note . If you want to change the paper size, . P.207 “Changing Paper Size”. Non-recommended Paper for Paper Trays • Folded, curled, creased, or damaged paper • Torn paper • Perforated paper • Paper with conductive or low electrical resistance coating such as carbon or silver coating • Thermal paper, art paper • Thin paper that has low stiffness 6 • Damp paper • Wavy paper • Stapled paper • T...