Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Drucker - HL-6050DN (2.57 mb)
Drucker - HL-6050DN (2.45 mb)
Anleitung Zusammenfassung
Off No data left in the memory. 3 - 8 CONTROL PANEL Liquid Crystal Display (LCD) Liquid Crystal Display (LCD) If there are any problems, the display shows the appropriate error message, maintenance message or call service message so you will know that you need to take action. For more information about these messages, see LCD messages on page 6-1. Back light Light Meaning Off The printer is power off or in sleep status. Green (General) Ready to print Printing Warming Up Job cancelling Red (Error) There is a problem with the printer. Orange (Setting) The printer is offline. Choosing a menu Setting Reprint times Pause CONTROL PANEL 3 - 9 LCD message Printer status messages The following table shows the printer status messages that are displayed during normal operation: Printer Status Message Meaning IGNORE DATA Printer is ignoring data processed using PS driver. JOB CANCELLING Cancelling the job. NOW INITIALIZING The printer is setting up. PAUSE The printer has suspended its operations. Press the Go button to start the printer again. PRESS SET TO PRINT Press the Set button to start printing. PRINTING Printing. PROCESSING Busy processing data. PROGRAMING-WAIT Accessing CompactFlash® card. RAM SIZE=XX MB This printer has XX MB memory. READY Ready to print. RESET TO FACTORY SETTINGS The printer settings returns to the factory settings. RESET TO USER SETTINGS The printer settings returns to the user settings. RESOLUTION ADAPT Printing with reduced resolution. SELF TEST Performing self-diagnostics. SLEEP In Sleep state WARMING UP The printer is warming up. 3 - 10 CONTROL PANEL How to use the control panel When you use the Menu buttons (+, -, Set or Back), remember the following basic steps: ¦ If no control panel operations are performed for 30 seconds, the LCD automatically returns to READY. ¦ When you press the Set button to choose a setting, an asterisk appears at the end of the display for a short time. After that, the display returns to the previous menu level. ¦ After changing the status or a setting, pressing the Back button before you press the Set button will cause the display to return to the previous menu level with the original settings unchanged. ¦ There are two ways to input numbers. You can press + or -to scroll up or down one number at a time, or you can hold down + or - to scroll faster. The blinking number is the one that you can change. CONTROL PANEL 3 - 11 For example: If you feed paper from the MP tray as a priority, change the MP FIRST setting to ON as follows. For example: If you feed paper from the MP tray as a priority, change the MP FIRST setting to ON as follows. READY INFORMATION PAPER SOURCE MP FIRST =OFF * =ON =ON * Press any of the Menu buttons (+, -, Set or Back) to take the printer offline. Press the + or - button to move forward or backward through the menus until PAPER is displayed. Press the Set button to move to the next menu level. Press the + or - button. Press the Set button. Press the + button. Press Set button. An asterisk * briefly appears at the end of the display. The default setting is indicated by an * 3 - 12 CONTROL PANEL Control Panel LCD menu The control panel LCD names for the paper trays are as follows. ¦ Standard paper tray: TRAY 1 ¦ Multi-purpose tray: MP TRAY ¦ Optional lower tray: TRAY 2 There are eight menus. For more information about the selections available in each menu, please see the pages listed below. ¦ INFORMATION See INFORMATION on page 3-14. ¦ PAPER See PAPER on page 3-15. ¦ QUALITY see QUALITY on page 3-15. ¦ SETUP See SETUP on page 3-16. ¦ PRINT MENU See PRINT MENU on page 3-17. ¦ NETWORK See NETWORK (only on a Network) on page 3-20. ¦ INTERFACE See INTERFACE on page 3-21. ¦ RESET MENU See RESET MENU on page 3-21. CONTROL PANEL 3 - 13 INFORMATION Display Shows Description PRINT SETTINGS Prints the print settings page. PRINT TEST Prints the test page. PRINT DEMO Prints the demonstration sheet. PRINT FILE LIST Prints the list of data saved in the CompactFlash® card or in the embedded memory when the CompactFlash® card has not been installed. PRINT FONTS Prints the font list and samples. VERSION Subsetting Description SER.NO=######### Shows printer serial number. ROM VER=#### Shows ROM version. ROM DATE=##/##/## Shows ROM date. NET VER=#### Shows network version (only Network users). RAM SIZE=###MB Shows the size of memory in this printer. MAINTENANCE PAGE COUNTER =###### Shows the current total printed pages. DRUM COUNT =###### Shows the pages printed with drum unit. REMAIN DRUM =###### Shows the pages left to print with drum unit. REMAIN PF KIT MP =###### Shows the pages left to print with PF kit MP. REMAIN PF KIT 1 =###### Shows the pages left to print with PF kit 1. REMAIN PF KIT 2 =###### Shows the pages left to print with PF kit 2. REMAIN FUSER =###### Shows the pages left to print with fuser unit. REMAIN LASER =###### Shows the pages left to print with laser unit. 3 - 14 CONTROL PANEL PAPER Display Shows Description SOURCE =AUTO/MP/TRAY1/TRAY2...
Dieses Handbuch ist für folgende Modelle:Drucker - HL-6050D (2.47 mb)