Stimmen - 4, Durchschnittliche Bewertung: 4.3
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
• Do not mount printouts in an adhesive-type album, as you may not be able to remove them. Photo Paper Pro 104 Printing Media Printing Media Be aware that some types of clear plastic folders and albums may cause the edges of the paper to turn yellow. ¦ Printable Area With some images, the trailing edge of the image may be blurred if printing extends outside the printable area. Canon recommends that you print within the printing area. . Printing Area Note . For photos and illustrations that you want to print with Borderless Printing, create the data by using the same size as the paper size, and paste the data so that it fills the editing screen without leaving any margins. If you are using an application that allows you to set margins, set the left, right, top, and bottom margins to 0 in. For instructions on setting margins, refer to the user's manual for your application. Photo Paper Pro 105 Printing Media Printing Media Made of the same material as Photo Paper Pro, this photo-size paper is intended for printing images that cover the entire surface of the card, without a white border. When printing, use the original application software, ZoomBrowser EX/PhotoRecord (for Windows) or ImageBrowser (for Macintosh). ¦ Loading • Load the paper with the glossy side facing up. • Set the paper thickness lever to the left. •A maximum of 20 sheets can be loaded at once. Paper thickness lever Glossy side Photo Paper Pro 4 x 6 (Perforated) 106 Printing Media Printing Media Handling of Printed Output • Do not stack more than 20 sheets in the paper output tray. • Do not touch the printed surface until the ink is fixed (approx. 30 minutes). Colors in dark images may appear indistinct at first, but become clearer after about 30 minutes. • Images may smudge if you place them in an album before the ink is completely dry. It is recommended that you allow the ink to dry for 24 hours. • Do not attempt to dry the ink with a hairdryer or by exposing printed sheets to direct sunlight. ¦ Storing Printed Output Follow the instructions described in "Photo Paper Pro". Photo Paper Pro 4 x 6 (Perforated) 107 Printing Media Printing Media This film is ideal for printing presentation material for use with overhead projectors. ¦ Loading • Place one sheet of plain letter-size or A4 paper under the transparencies in the sheet feeder. • Set the paper thickness lever to the left. •A maximum of 30 sheets can be loaded at once. Paper thickness lever Plain paper Transparencies Transparencies 108 Printing Media Printing Media Although you can print on either side of transparency media, best results can be obtained by printing on the side toward which it curls when held by the edge. Print side ¦ Printer Driver Settings • Media Type: Transparency • Page Size: Ensure that the setting matches the size set in the application. ¦ Handling of Printed Output • Remove each transparency as soon as it is printed. • Do not touch the printed surface until the ink is fixed (approx. 15 minutes). ¦ Printable Area . Printing Area Transparencies 109 Printing Media Printing Media This paper is used to produce iron-on transfers. The image is printed backwards when Media Type is set to T-Shirt Transfer in the printer driver. Note . For more information, refer to the instructions packaged with your media. ¦ Loading • Load only one sheet at a time. • If the T-shirt transfer is curled, flatten it by curling it in the opposite direction. • Load the paper with the side that does not have green lines facing up. • Set the paper thickness lever to the right. Paper thickness lever T-Shirt Transfers 110 Printing Media Printing Media Printer Driver Settings • Media Type: T-Shirt Transfer • Page Size: Ensure that the setting matches the size set in the application. ¦ Handling of Printed Output • Remove each T-shirt transfer as soon as it is printed. • The T-shirt transfer should be used as soon as it is printed. Refer to the supplied instructions for details on how to use this media. ¦ Printable Area . Printing Area T-Shirt Transfers 111 Printing Media Printing Media This is long paper that consists of consecutive sheets of letter-size or A4 paper, ideal for printing long posters or banners (up to six sheets long). ¦ Preparation for Printing • When tearing the banner paper, tear off one more sheet than you actually need to print. • The maximum length for one print job is six sheets, so if you will be printing on six sheets, tear off a seven-sheet length. ¦ Loading 1 Set the paper thickness lever to the right. 2 Load the banner paper with the printing side facing up. Gently fold the perforation between the first and second sheets. Leave the rest of the paper folded up. Banner Paper 112 Printing Media Printing Media 3 Place the printer where the printed banner output can hang over the edge of the table. Ensure that the ink does not stain the table or floor. Banner Paper 113 Printing Media Printing Media Printer Driver Settings • Media Type: Plain Paper • Page Size: When using letter-s...