Stimmen - 2, Durchschnittliche Bewertung: 5
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
Operation Panel Names and Functions Last Copies Specify the number of photograph copies to be printed. Mode button Press this button to switch the Layout print mode (index printing, all frame printing, single frame printing, etc.). See "Printing Photographs" on page 35. Quality Maintenance button Press this button to perform printer maintenance operations, such as print head cleaning. Cancel button Press this button to stop printing or to stop maintenance. items. See "Operating maintenance setting. the Cursor Buttons" on page 27. Cursor The cursor is displayed at the item whose setting can be changed. When printing a range of continuous photograph frames, specify the number of the last photograph. For specified frame printing, specify the number of the photograph to be Media Type Specify the type of media to be used for printing. Specify the number of photographs to be printed on one sheet. Specify the print quality. Print Date Specify whether the date when the photograph was taken is to be printed. Optimize Image Specify whether the photograph is to be adjusted before printing. Required Sheets The number of sheets required for printing is displayed. During maintenance, the step number is displayed. If an error occurs, the error number is displayed. Cursor button Press these buttons when setting various Print button Press this button to start printing or to apply the First/-Order-When printing a range of continuous photograph frames, specify the number of the first photograph. (When printing only one frame, specify the number of photograph to be printed.) For specified frame printing, the specified number (printing order) is displayed. Operating Moving between Items To move the (cursor), press the (up) and (down) buttons. Changing a Setting To change the photograph number or a setting, press the (left) and (right) buttons. The (right) button increases the photograph number; the (left) button decreases the photograph number. n Using This section explains a memory Memory Card and Adapter You can use the following Set the memory card in the PC card adapter to use the card. • Compact flash (Use the PC card adapter that comes with this • Smart media • Memory stick • SD memory card • Multimedia card • Micro drive • Flash ATA card PCMCIA Type (II) (The PC card adapter is not necessary.) When using a memory card, note the following points: • Some digital cameras do not support 64MB or 128MB memory Photographs stored in memory cards that are not supported by the camera cannot be read or may be destroyed. • Format the memory card with the digital camera. This printer does not support the computer's unique format. • Photographs that have been edited with the computer may not print properly. • Use a PC card adapter that is recommended by the memory card you use. a Note For information on memory cards and PC card adapters that are supported by a digital camera, ask the digital camera manufacturer. Setting the Memory Card a Note The operation procedure is different if you are using a memory card when the printer is connected to the computer. See the "User's Guide." 1 Turn on the printer. 2 Set the memory card into the PC card adapter. The (memory card) mark appears on the operation panel when the PC card adapter is set correctly. Memory card mark 3 Set the slot. The indicator lamp a Notes • When changing/modifying the memory card of the computer, ensure to print from the computer. When printing from the operation panel, printing be done correctly. When printing from the operation panel, eject the memory card and print again after having reset it. • Ensure to insert the PC card adapter deeply. a Note If images on the installed memory card are recorded in formats that are not supported by this printer, an -E- (error) appears with First/-Order- or Last. Such images are not printed. Ejecting the Memory Card a Note The operation procedure is different if you are using a memory card when the printer is connected to the computer. See the "User's Guide." 1 Check that the indicator lamp is not blinking. a Note If you remove the memory card or switch off the power to the printer while the indicator lamp is blinking, the data of the memory card may be destroyed. 2 Press the printer power button to turn off the printer. 3 Check that Indicator lamp Eject button. and press 4 Pull out the PC a Note Do not remove only the memory card with the PC card adapter still set in the card slot. a Notes Saving the ink (to users who will be using the printer without connecting to a computer) • Except when the printer will not be used for a long period of time (one month or longer), always leave the printer plugged in. (Use the Power button on the printer to turn the printer on/off.) If the printer is not connected to a computer, print head cleaning begins automatically when the power plug is unplugged and then reinserted. This action maintains the optimal print head condition but also consumes ink. • This product should be connected directly to th...