Stimmen - 2, Durchschnittliche Bewertung: 4.5
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
Plug the power cord into the back of the printer and connect the other end to a power outlet. Continue with Step 6 on side two. USB Port USB Cable Protective cap Remove the black ink tank (BCI-24 Black) from its packaging and pull off the orange protective cap. NOTE: To avoid spilling ink, do not touch the bottom of the tank once you have removed the protective cap. Insert the black ink tank into the slot on the right. Press down until the ink tank locks into place. Repeat the procedure for the color ink tank (BCI-24 Color), inserting it into the remaining slot. Close the front cover. Pull out the paper rest and the output tray. Turn the print head over, then remove the orange protective cap. Electrical contacts Print head nozzles Remove the print head from its package. NOTE: Do not touch the electrical contacts. Raise the gray lock lever. Slide the print head into the holder until it is securely seated. Lower the gray lock lever until it locks into place. Serial number Print head holder Packing material Shipping Tape Open the front cover. Remove the packing material from the print head holder. Remove the shipping tape from the printer. NOTE: The serial number is located to the right of the print head. You will need this to register the product. NOTE: The “i320 Setup Software & User’s Guide” CD-ROM contains printer drivers, software applications and electronic manuals. Carefully remove all items from the box. Series Bubble Jet Printer Documentation and Software Kit Power Cord Print Head Ink Tanks BCI-24 Black BCI-24 Color 1 1 2 1 5 4 3 1 2 1 2 3 4 2 1 Unpack the Printer 2 Prepare the Printer 3 Install the Print Head 4 Install the Ink Tanks 5 Connect the Printer To Your Computer Macintosh From the Application folder, double-clickIMPORTANT: Drivers included with 7 6 Install the Printer Driver (Macintosh®) From the Application folder, double-clickIMPORTANT: Drivers included with 7 6 Install the Printer Driver (Macintosh®) When the driver installation is complete, click Finish. Register your product to ensure product support. Follow the on-screen instructions. When the software menu appears, click Install. When the software installation is complete, click OK, then Exit. To ensure highest quality output, continue with Step 7 Align the Print Head. 8 9 10 6 7 Turn the computer on and LEAVE THE PRINTER OFF. Close all software applications, then insert the “i320 Setup Software & User’s Guide” CD-ROM. The setup program should run automatically. NOTE: For Windows® XP or Windows 2000, log on to Windows as an Administrator before continuing. IMPORTANT: If you see the Found New Hardware Wizard, click Cancel. When the main menu appears, click Install. Read the License Agreement, then click Yes to continue. NOTE: If the CD-ROM does not run automatically, double-click My computer, then double-click the CD-ROM icon. When the Printer Port window appears, TURN THE PRINTER ON. The software will begin identifying the printer port being used. IMPORTANT: If your computer can not detect a printer port, refer to the Troubleshooting chapter in the i320Quick Start Guide for instructions. 1 2 3 4 5 Windows 6 Install the Printer Driver (Windows®) 10 Click on the i320 printer icon. 11 Close the Chooser. NOTE: Register your product at to ensure product support. If the message “No other applications can be running...” displays, click Continue. 12 To ensure highest quality output, continue with Step 7 Align the Print Head. Place a stack of blank paper in the paper rest. Before using the printer, align the print head to ensure the best quality printing. Start the alignment procedure. Macintosh: a. From the File menu in a software application, click Page Setup. b. Click the Utilities button. c. Click the down-arrow to select Test Print. d. Click the Print Head Alignment icon. e. Wait about 60 seconds for the calibration sheet to print. Follow the on-screen instructions to complete print head alignment. Click OK (Windows) or Close then OK (Macintosh) when finished. Windows: a. For Windows XP select Start, Settings, then Control Panel, then click on Printers and Other Hardware, then Printers and Faxes. b. Right-click the Canon i320 icon, then click Printing Preferences. c. Click the Maintenance tab, then click the Print Head Alignment icon. d. When asked to start print head alignment, click OK. e. Wait about 60 seconds for the calibration sheet to print. Follow the on-screen instructions to complete print head alignment. QA7-2171-V01/082002A ©2002 Canon U.S.A. Inc. Canon is a registered trademark of Canon Inc. All other products and brand names are registered trademarks or trademarks of their respective owners. Specifications subject to change without notice. PRINTED IN THAILAND 1 2 3 7 Align the Print Head 4 5 3 Read the License Agreement, click Accept to continue. Click Install. The printer driver will load automatically. When the “Installation was successful” screen displays, click Restart. 6 1 2 this printer support Ma...