Stimmen - 3, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
TURN THE PRINTER OFF. Connect the one end of the USB cable to the computer, the other to the printer. Slide the paper guide to the left. Load a sheet of blank paper in the paper rest. Slide the guide toward the left edge of the paper. USB connection USB port USB Plug DC Plug Paper Guide Click Remove the BCI-15 Black Ink Tank from its package. You MUST remove the protective cap. Insert the Black Ink Tank into the back slot. Close the print head cover and move the paper thickness lever to the right. Using the procedure above, insert the Color Ink Tank into the front slot. Paper Thickness Lever Press on the area until the ink tank clicks into place. NOTE: The printer will perform a print head cleaning after the cover is closed. Wait until the process is complete before proceeding. Print Head Cover Remove the print head from its package. Lower the lock lever until it clicks into place. Nozzles Press in on the lock button and lift the gray lock lever. Remove the protective cap from the print head. Tear at Notch Click NOTE: Do not touch the print head nozzles. Place the print head into the holder, by aligning the mark with the mark. Lift open the paper rest and TURN THE PRINTER ON. The printer will initialize. After the printer finishes initializing, open the print head cover. Plug the power cord into the AC adapter. Connect the DC plug to the printer. Plug the power cord into a power outlet. Remove the shipping materials from the printer. Serial Number Location Power Cord DC Plug AC Adapter Paper Output Slot Cover Paper Rest Paper Rest Print Head Cover IMPORTANT: Do not open the cover before the printer has finished initializing. Wait until the POWER lamp remains fully lit. Carefully remove all items from the box. Documentation and Software Kit Power Cord AC Adapter i80 Series Print Head i80 Series Printer BCI-15 Color Ink Tank BCI-15 Black Ink Tank 1 2 3 4 1 2 4 5 1 3 1 2 3 4 5 6 1 2 3 1 Unpack the Printer 2 Prepare the Printer 3 Install the Print Head 4 Install the Ink Tanks 5 Connect Your Printer and Load Paper Macintosh Serial # Location Part no. QA7-3120-V01 ©2003 Canon U.S.A., Inc. Canon is a registered trademark of Canon Inc. All other products and brand names are registered trademarks or trademarks of their respective owners. Specifications subject to change without notice. P-i80-ESI-0903 Printed in Vietnam Access your CD-ROM Application folder and double-click on the software to be installed. Follow the on-screen instructions. When the “Installation is Complete” screen appears, click OK. Double-click on the Product Registration icon, found in the Mac OS X folder. Register your product to ensure product support. Follow the on-screen instructions. When the message asking you to align the print head appears, click OK. Start the print head alignment procedure. a. Double-click the Macintosh HD icon, then Applications folder. Double-click the Utilities folder, then the Print Center icon. b. When the Printer List screen appears, select i80, then click the Configure icon. c. Select i80 and click Maintenance. d. Click the down-arrow to select Test Print. Click the Print Head Alignment icon and follow the on-screen instructions. Click Quit to exit the BJ Printer Utility. Print head alignment is now complete. Turn on your Mac and insert the “Setup Software & User's Guide” CD-ROM. TURN THE PRINTER ON. Double-click the i80.mpkg icon. Double-click the CD-ROM icon, then the Mac OS X folder, then the Printer Driver folder. NOTE: For Mac OS 8.6 to 9.x printer driver instructions, refer to the "Appendix" of the Quick Start Guide. When the message “The software was successfully installed” appears, click Restart. Click Install. When a message asking for your confirmation to proceed with the installation appears, click Continue Installation. When the “Welcome to the BJ printer driver Installer” screen appears, click Continue. Read the Software License Agreement and click Continue, then click Agree. When the “Authenticate” screen appears, enter your administrator name and password, then click OK. Select a destination for the printer driver to be installed. Then click Continue. Start the print head alignment procedure. a. For Windows XP click Start, select Control Panel, Printers and Other Hardware, then Printers and Faxes. b. Right-click the i80 icon, then click Printing Preferences. NOTE: For Windows 98/Me/2000 click Start, then select Settings, Printers. Right-click the i80 icon, then click Properties. c. Click the Maintenance tab, then click on the Print Head Alignment icon. d. When asked to start the print head alignment, click Print Head Alignment and follow the on-screen instructions. e. Look at the printed patterns and input the values for each pattern that shows no flaws (least number of white stripes).Then click OK. Click OK to exit the Maintenance tab. Print head alignment is now complete. 11 12 NOTE: The serial number is located on the back of the printer. When the Terminate Installation window appears, click OK. ...