Stimmen - 3, Durchschnittliche Bewertung: 4.3 ( )

Hersteller: Canon Dateigröße: 1.53 mb Dateiname: Unterrichtssprache:

Dieses Gerät hat auch andere Anweisungen:

Drucker - PIXMA MP750 (868.79 kb)

• In this sheet, illustrations of MP780 are shown. • A printer cable is not included. You must purchase a USB cable (less than 16 3/8 ft.) to connect your machine to a computer. 2 Connect the telephone line. (MP780 model only) Connect the telephone line and any necessary external device. For details, see the Quick Start Guide. 3 Connect the power cord. 1 Connect the power cord. 1. Connect one end of the power cord to the rear of the machine. 2. Connect the other end to the AC outlet. 2 If the message appears, go to Step 4, "Install the print head." 4 Install the print head. 1 Press the Open Button to open the Paper Output Tray. Then lift the Scanning Unit until it locks into place. IMPORTANT Be sure to hold the Scanning Unit firmly with one hand. 6 Lower the lock lever. 5 Install the ink tanks. 1 Prepare the ink tanks. 2 Insert the ink tanks. 3 Close the Inner Covers and the Scanning Unit. 6 Load the paper. 1 Open the Auto Sheet Feeder. 2 Load two sheets or more of letter-size plain paper. 7 Align the print head from the Operation Panel. Be sure to align the print head to ensure print quality. 1 Press [OK] to start print head alignment. If the printed pattern matches the illustration, print head alignment is complete. You can change the language displayed on the LCD. For details, see "Selecting The Language For The LCD" in the Quick Start Guide. You have completed installation and alignment. If you are connecting the machine to a computer for use, see the rear side of this sheet for instructions on installing the software. Thank you for purchasing the Canon PIXMA MP780/750. To prepare your machine for use, please follow these Easy Setup Instructions before referring to any other documentation. IMPORTANT Do not connect the USB cable until after the software is installed. See the rear side of this sheet for details. • Machine • Power cord • Print head • Telephone line • Ink tanks Black BCI-3eBK Black BCI-6BK Cyan BCI-6C Magenta BCI-6M Yellow BCI-6Y • Easy Setup Instructions • Quick Start Guide • Setup CD-ROM The Setup CD-ROM contains the MP Drivers, as well as the User's Guide, Software Guide and Photo Application Guide in electronic format. Please read these guides. 2 Open the two Inner Covers. 3 Raise the lock lever. 4 Prepare the print head. 5 Insert the print head. MP780 MP750 Connect external devices as follows: External device jack Telephone line jack Telephone or answering machine Built-in computer modem and telephone Telephone line Telephone line Machine Machine Telephone or answering machine LINE TEL Computer Telephone Connect the telephone line cord to the wall jack. You can connect an external device (telephone or answering machine) if necessary. Press the Open Button. Lift the Scanning Unit. Pull the Scanning Unit Lever. Click (1) Open the two Inner Covers. (2) The Print Head Holder moves to the center. (3) Install the print head here. Touch only the lock lever! Raise this securely. Do not touch! Remove the protective cap and discard it. (2) Push back. (1) Insert. Lower the lock lever until you hear a click as it locks into place. Click Remove the orange-colored protective film. If it is not removed completely, problems with printing may occur. Remove the protective cap and discard it. Do not touch! Push it in until locks into place. Click Bad example: Tank 6BK is not fully inserted. Make sure to press it down firmly. Good example Close the two Inner Covers. Pull the Scanning Unit Lever towards you to close the Scanning Unit. Click Click IMPORTANT Be sure to hold the Scanning Unit firmly with one hand. (2) Pull out the Paper Support until it stops. Pinch and adjust the paper guide to the width of the stack. Load the paper with the print side face up. Ensure the paper stack does not exceed the paper limit mark. (1) Open the Auto Sheet Feeder. (1) This message appears. (2) Press [OK]. If this message does not appear after closing the Scanning Unit, see "Aligning The Print Head Automatically" in the Quick Start Guide. (3) The machine will print the print head position pattern and automatically align the print head. ALIGN PRINT HEAD PRESS [OK] © 2004 Canon U.S.A., Inc., Canon and BCI are registered trademarks and PIXMA is a trademark of Canon Inc. All other products and brand names are registered trademarks or trademarks of their respective owners. Specifications subject to change without notice. HT7-0029-000-V.1.0 xx2004A © CANON INC. 2004 PRINTED IN CHINA Install the software. Select Easy Install in order to install the application software, electronic manual and MP drivers. Select Custom Install in order to choose the options you would like to install. This sheet explains Easy Install Only. IMPORTANT • If you have an earlier version of the MultiPASS Suite software installed on your computer, uninstall this version before installing the new version. For instructions on uninstallation, see the guides for that version of MultiPASS Suite. • Close any open software applications, inclu...

Herunterladen

Geben Sie zwei Ziffern: