Stimmen - 4, Durchschnittliche Bewertung: 4
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
Fax To redial now, press Start Fax The machine is waiting to automatically redial the fax number that was busy or did not answer. Fax Processing Job You attempt to enter My Favorites, while sending My Favorites document or printing My Favorites document. Fax Fixing Problems Your problem may be listed in "LCD error messages" on page 8.7. The chart below shows other problems you can solve yourself. If not, call the service company shown in the separate Warranty Card. Fax problems Problem Solution The machine is not working, there is no display and the buttons are not working. Unplug the power cord and plug it in again. Check that your socket is live. No dial tone. Check that the phone is connected properly. Check the phone socket in the wall by plugging in another phone. The numbers stored in memory do not dial correctly. Make sure the numbers are programmed correctly. To print a Phonebook Report, see "To print a report" on page 6.4.. The document does not feed into the machine. Be sure the document is not wrinkled, and you are putting it in correctly. Check that the document is the right size and not too thick or too thin. You cannot receive faxes automatically. Check if TEL appears on the right side of the display. In TEL mode, you cannot receive a fax automatically. Be sure the handset is seated on the cradle properly. The machine cannot receive faxes manually. Do not hang up the handset before pressing Start fax. The machine does not send anything. Check that the document is loaded face down.Send should show up in the display.You may have hung up the handset before you pressed Start fax. Check if the machine to which you are sending can receive your fax. You cannot poll another machine. The fax machine you are polling may be using a poll code. The fax you received has blank bits on it. The machine sending to you may be faulty. A noisy phone line can cause line errors. Check your machine by making a copy. Spots or lines missing from the fax you receive. Check if your phone line is noisy. Check if the printhead is clean by making a copy. You are receiving poor quality copies. The fax machine sending to you may have a dirty scan glass. Check for a noisy phone line. Some of the stretched words on the fax you receive The machine sending to you had a temporary document jam. Your machine does not make copies. Make sure your document is loaded face down. There are lines on copies or documents you send. Check your scan glass for marks and clean it (see "Cleaning the document scanner" on page 8.2.) The machine dials a number, but fails to make a connection with a remote fax machine. The remote fax machine may be turned off, or unable to answer incoming calls. Speak with the remote operator and ask for the problem to be rectified. You cannot store a document in memory. There may not be enough memory available to hold the document you want to store. If the display shows a Memory Full message, delete any documents you no longer need, ...
Dieses Handbuch ist für folgende Modelle:Faxgeräte - SF-360 Series (5.05 mb)
Drucker - SF-360 (5.05 mb)
Drucker - SF-361P (5.05 mb)