Stimmen - 3, Durchschnittliche Bewertung: 4.3
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
Receiving in AUTO mode on page 3.5. TAM SF-345TP Your machine plays a greeting message to callers, and then the caller can leave an incoming message on your machine as well as a fax. Receiving in TAM mode (SF-345TP) on page 3.6. SF-340 You have to have an answering machine attached to the EXT line socket on your fax machine. When the phone rings, the attached answering machine answers and stores the caller’s message if they leave one. If your machine senses a fax tone on the line, the call automatically switches over to fax receive mode. Receiving in TAM mode on page 3.5. If you rarely use the fax line for voice conversation, set the machine to receive faxes automatically by selecting either FAX or AUTO Mode. Receiving in FAX mode To set the machine to FAX Mode, press Rcv.Mode/Darkness repeatedly until Fax Mode is displayed. • In Standby Mode, FAX appears in the right hand corner of the display. • When you get a call, the machine answers after the second ring, and receives the fax automatically. When reception is complete, the machine returns to Standby Mode. • If you want to change the ‘Rings to Answer’ option, see "Rings To Answer" on page 6.9. Receiving in TEL mode To set the machine to TEL Mode, press Rcv.Mode/Darkness repeatedly until Tel Mode is displayed. In Standby Mode, TEL appears in the right hand corner of the display. 1 Pick up the handset and answer it when the telephone rings. If your machine is an SF-345TP, and you do not answer the call within pre-defined rings4, the TAM OGM will be played. 2 Press Start Fax if you hear a fax tone, or if the person on the other end asks you to receive a document. Be sure there is no document loaded, or the document will be sent to the caller’s fax showing ‘Send’ in the display. 3 Hang up the handset. Receiving in AUTO mode To set the machine to AUTO Mode, press Rcv.Mode/Darkness repeatedly until Auto Mode is displayed. • In Standby Mode, AUTO appears in the right hand corner of the display. • When a call comes in, the machine answers it. If a fax is being received, the machine goes into receive mode. If the machine does not sense a fax signal, it will continue ringing to tell you it is a phone call. You should pick up the handset to answer the call, or it will switch to automatic reception mode, after approximately 25 seconds. Receiving in TAM mode To use this receiving mode, you need to have an answering machine attached. To set the machine to TAM Mode, press Rcv.Mode/Darkness repeatedly until TAM MODE is displayed. In Standby Mode, TAM appears in the right hand corner of the display. • When a call comes in, the answering machine answers and stores the caller’s message if they leave one. If the machine detects a fax signal, it goes into receive mode. • If you have set your machine to TAM Mode and your answering machine is switched off, or the answering machine is not connected to your fax machine, the machine will automatically go into receive mode after several rings....
Dieses Handbuch ist für folgende Modelle:Faxgeräte - SF-340 Series (1.92 mb)
Drucker - SF-340 (1.92 mb)
Drucker - SF-341P (1.92 mb)