Stimmen - 4, Durchschnittliche Bewertung: 4.5
(
)
)
|
Anleitung Zusammenfassung
Wireless network setup 332. Using a network-connected machine See 332. Using a network-connected machine See "Setup using Windows" on page 38. • With a USB cable: You can simply set up a wireless network using the program on the supplied software CD. Only Windows and Macintosh operating systems are supported (see "Setup using Windows" on page 38 or "Setup using Macintosh" on page 45). You can also install a wireless network in Samsung Easy Printer Manager (Device Settings) or Printer Settings Utility with a USB cable after installing the driver (Windows and Macintosh operating systems are supported). • With a network cable: You can set up a wireless network using the SyncThru™ Web Service program (see "Using a network cable" on page 51). ....Using the WPS Some models may not support this feature. If your machine and an access point (or wireless router) support Wi- Fi Protected Setup™ (WPS), you can easily configure the wireless network settings on the control panel without a computer. If you want to use the wireless network using the infrastructure mode, make sure that the network cable is disconnected from the machine. Using the WPS (PBC) button or entering the PIN from the computer to connect to the access point (or wireless router) varies depending on the access point (or wireless router) you are using. Refer to the user's guide of the access point (or wireless router) you are using. Items to prepare • Check if the access point (or wireless router) supports Wi-Fi Protected Setup™ (WPS). • Check if your machine supports Wi-Fi Protected Setup™ (WPS). • Networked computer (PIN mode only) Choosing your type The Push Button Configuration (PBC) method allows you to connect your machine to a wireless network by pressing both the WPS menu on the control panel of your machine and the WPS (PBC) button on a Wi-Fi Protected Setup™ (WPS)-enabled access point (or wireless router) respectively. Wireless network setup 342. Using a network-connected machine Wireless network setup 342. Using a network-connected machine The Personal Identification Number (PIN) method helps you connect your machine to a wireless network by entering the supplied PIN information on a Wi-Fi Protected Setup™ (WPS)enabled access point (or wireless router). To change the WPS mode , press (Menu) > Network > Wireless > WPS Setting. For models that have the touch screen on the control panel, follow the next procedure: a Press Setup from the Main screen. b Press Network > Next > Wireless > WPS Setting. c Select the setup method you want. Machines with an display (or touch) screen > Connecting in PBC mode (recommended) Press (Menu) > Network > Wireless > WPS Setting. For models that have the touch screen on the control panel, press Setup > Network > Next > Wireless > WPS Setting. Press PBC (or Connect via PBC). 3 3 Press OK when the confirmation window appears. Information window appears showing 2 minutes connection processing time. 4 4 Press the WPS (PBC) button on the access point (or wireless router). The messages are displayed on the display screen in the order below: a Connecting: The machine is connecting to the access point (or wireless router). b Connected: When the machine is successfully connected to the wireless network, the WPS LED light stays on. c AP SSID: After completing the wireless network connection process, the AP’s SSID information appears on the display. > Connecting in PIN mode 1 1 Press (Menu) > Network > Wireless > WPS Setting. For models that have the touch screen on the control panel, press Setup > Network > Next > Wireless > WPS Setting. 2 2 Press PIN (or Connect via PIN). 3 3 Press OK when the confirmation window appears. Wireless network setup 352. Using a network-connected machine 4 The eight-digit PIN appears on the display. Machines without an display screen Wireless network setup 352. Using a network-connected machine 4 The eight-digit PIN appears on the display. Machines without an display screen You need to enter the eight-digit PIN within two minutesin order to link the computer which is connected to the access point (or wireless router). The messages are displayed on the display screen in the order below: a Connecting: The machine is connecting to the wireless network. b Connected: When the machine is successfully connected to the wireless network, the WPS LED light stays on. c AP SSID: After completing the wireless network connection process, the AP’s SSID information is diplayed on the LCD display. > Connecting in PBC mode (recommended) 1 1 Press and hold the (WPS) button on the control panel for about 2 - 4 seconds until the status LED blinks quickly. The machine starts connecting to the wireless network. The LED blinks slowly for up to two minutes until you press the PBC button on the access point (or wireless router). 2 2 Press the WPS (PBC) button on the access point (or wireless router). a The light blinks fast on the WPS LED. The machine is connecting to the access point (or wireless router). b When the ma...
Dieses Handbuch ist für folgende Modelle:Drucker - ML-4510ND (15.33 mb)
Drucker - ML-4512ND (15.33 mb)
Drucker - ML-5010ND (15.33 mb)
Drucker - ML-5010ND/SED (15.33 mb)