Stimmen - 2, Durchschnittliche Bewertung: 3
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
Top Cover (Open to access the toner cartridge.) Handle Rear View * The figure above shows an ML-3561ND with all available options. Parallel Port USB Port Power Switch Network Port (ML-3560: Option ML-3561N and ML-3561ND: Standard) Rear Cover (Face up) Optional Tray 2 Cable Connector Optional Duplex Unit (ML-3561ND: Standard ML-3560 and ML-3561N: Option) Power Receptacle Optional Tray 2 Cable 2 Setting Up Your Printer This chapter provides step by step information on setting up your printer. This chapter includes: •Unpacking • Installing the Toner Cartridge •Loading Paper • Connecting a Printer Cable • Turning the Printer On • Printing a Demo Page • Changing the Display Language • Using the Toner Save Mode • Installing Printer Software Unpacking 1 Remove the printer and all accessories from the packing carton. Make sure that the printer has been packed with the following items: Network Utilities Print Driver CD* CD** Power Cord*** Network Printer Quick Guide Toner Cartridge Quick Guide** * The Printer Driver CD contains the printer driver, the User’s Guide, and the Adobe Acrobat Reader programme. **The Network Utilities CD and Network Printer Quick Guide are only for ML-3561N and ML-3561ND. ***The appearance of the power cord may differ depending on your country’s specifications. NOTES: • If any items are missing or damaged, notify your dealer immediately. • Components may differ from one country to another. CAUTION: The printer weights 17 kg including the toner cartridge and the tray. Use safe lifting and handling techniques. If you need to move the printer, it should be moved by two people. Use the lifting handles as shown in page 1.3. Back injury could result if a single person attempts to lift the printer. 2 Carefully remove all of the packing tape from the printer. 2.1 Setting Up Your Printer 2.2 Pull the paper tray out of the printer and remove the packing tape and the packing material inside of the tray. Selecting a Location Select a level, stable place with adequate space for air circulation. Allow extra space for opening covers and trays. The area should be well-ventilated and away from direct sunlight or sources of heat, cold, and humidity. Do not set the printer close to the edge of your desk or table. Clearance Space (enough space so that trays can be opened allow opening of the 320mm(12.6in) 482.6mm(19in) 100mm(3.9in) 100mm(3.9in) Installing the Toner Cartridge 1 Open the top cover. Pull up on the handle to open the cover. 2 Remove the starter toner cartridge from its bag. CAUTION: Do not use sharp objects, such as a knife or scissors, to open the toner cartridge package. They might scratch the drum of the cartridge. 3 Locate the sealing tape at the end of the toner cartridge. Carefully pull the tape completely out of the cartridge and discard it. NOTES: • The sealing tape should be longer than 60 cm when correctly removed. • Holding the toner cartridge, pull the sealing tape straight to remove it from the cartridge. Be careful not to cut the tape. If this happens, you cannot use the toner cartridge. • Refer to the helpful pictures on the cartridge wrapping paper. Pull the paper tray out of the printer and remove the packing tape and the packing material inside of the tray. Selecting a Location Select a level, stable place with adequate space for air circulation. Allow extra space for opening covers and trays. The area should be well-ventilated and away from direct sunlight or sources of heat, cold, and humidity. Do not set the printer close to the edge of your desk or table. Clearance Space (enough space so that trays can be opened allow opening of the 320mm(12.6in) 482.6mm(19in) 100mm(3.9in) 100mm(3.9in) Installing the Toner Cartridge 1 Open the top cover. Pull up on the handle to open the cover. 2 Remove the starter toner cartridge from its bag. CAUTION: Do not use sharp objects, such as a knife or scissors, to open the toner cartridge package. They might scratch the drum of the cartridge. 3 Locate the sealing tape at the end of the toner cartridge. Carefully pull the tape completely out of the cartridge and discard it. NOTES: • The sealing tape should be longer than 60 cm when correctly removed. • Holding the toner cartridge, pull the sealing tape straight to remove it from the cartridge. Be careful not to cut the tape. If this happens, you cannot use the toner cartridge. • Refer to the helpful pictures on the cartridge wrapping paper. Front: 482.6 mm or removed) Back: 320 mm (enough space to rear output tray) Right: 100 mm (enough space for ventilation) Left: 100 mm (enough space for ventilation) Setting Up Your Printer Setting Up Your Printer 2.3 4 There is a flexible plastic holder. Remove the holder out of the toner cartridge. 5 Thoroughly shake the cartridge from side to side to distribute the toner evenly inside the cartridge. Thoroughly shaking the cartridge will assure maximum copies per cartridge. CAUTION: • If toner gets on your clothing, wipe it off with a dry cloth and wash cloth...
Dieses Handbuch ist für folgende Modelle:Drucker - ML-3560 (5.22 mb)
Drucker - ML-3561N (5.22 mb)
Drucker - ML-3561ND (5.22 mb)
Drucker - ML-3561NDR (5.22 mb)