Stimmen - 3, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
2 2 If it’s your first time logging into SyncThru™ Web Service you need to log-in as an administrator. Type in the below default ID and password. • ID: admin • Password: sec00000 3 3 When the SyncThru™ Web Service window opens, move the mouse cursor over the Settings of the top menu bar and then click Network Settings. IPv6 configuration 292. Using a network-connected machine 4 Click TCP/IPv6 on the left pane of the website. 292. Using a network-connected machine 4 Click TCP/IPv6 on the left pane of the website. Address must be enclosed in '[ ]' brackets. 5 5 Check the IPv6 Protocol check box to activate IPv6. 6 6 Check the Manual Address check box. Then, the Address/ 7 7 Prefix text box is activated. Enter the rest of the address (e.g.,:3FFE:10:88:194::AAAA. “A” is 8 8 the hexadecimal 0 through 9, A through F). Choose the DHCPv6 configuration. 9 9 Click the Apply button. Using SyncThru™ Web Service 1 1 Start a web browser, such as Internet Explorer, that supports 2 2 IPv6 addressing as a URL. Select one of the IPv6 addresses (Link-local Address, Stateless Address, Stateful Address, Manual Address) from Network Configuration Report (see "Printing a network configuration report" on page 13). 3 3 Enter the IPv6 addresses (e.g.,: [FE80::215:99FF:FE66:7701]). Make sure your machine supports a wireless network. Wireless network may not be available depending on the model. 302. Using a network-connected machine Wireless network setup Wireless network name and network key ....Getting started Understanding your network type Typically, you can only have one connection between your computer and the machine at a time. Infrastructure mode This is an environment generally used for homes and SOHOs (Small Office/ Home Office). This mode uses an access point to communicate with the wireless machine. Ad hoc mode This mode does not use an access point. The wireless computer and wireless machine communicates directly. Wireless networks require higher security, so when an access point is first set up, a network name (SSID), the type of security used, and a Network Key are created for the network. Locate this information before proceeding with the machine installation. ....Choosing the installation type You can install a wireless network from the machine’s control panel or the computer. From the control panel For most users, we recommend using the (WPS) button to configure the wireless network settings. • (WPS): If your machine and an access point (or wireless router) support Wi-Fi Protected Setup™ (WPS), you can easily configure the wireless network settings by pressing the (WPS) button on the control panel (see "Using the WPS button" on page 31). • Control panel: You can configure wireless parameters with the control panel (see "Using the menu button" on page 35 ). Wireless network setup 312. Using a network-connected machine From the computer From the computer, we recommend using a USB cable with the .... 14 Using the WPS button 312. Using a network-connected machine From the computer From the computer, we recommend using a USB cable with the .... 14 Using the WPS button program provided in the supplied software CD. See "Setup using Windows" on page 37. • With a USB cable: You can simply set up a wireless network using the program on the supplied software CD. Only Windows and Macintosh operating systems are supported (see "Setup using Windows" on page 37 or "Setup using Macintosh" on page 45). You can also install a wireless network in Printer Settings Utility with a USB cable after installing the driver (Windows and Macintosh operating systems are supported). • With a network cable: You can set up a wireless network using the SyncThru™ Web Service program (see "Using a network cable" on page 51). If your machine and an access point (or wireless router) support Wi- Fi Protected Setup™ (WPS), you can easily configure the wireless network settings by pressing the (WPS) button on the control panel without a computer. If you want to use the wireless network using the infrastructure mode, make sure that the network cable is disconnected from the machine. Using the WPS (PBC) button or entering the PIN from the computer to connect to the access point (or wireless router) varies depending on the access point (or wireless router) you are using. Refer to the user's guide of the access point (or wireless router) you are using. Items to prepare • Check if the access point (or wireless router) supports Wi-Fi Protected Setup™ (WPS). • Check if your machine supports Wi-Fi Protected Setup™ (WPS). • Networked computer (PIN mode only) Wireless network setup 322. Using a network-connected machine Choosing your type Machines with an display screen Wireless network setup 322. Using a network-connected machine Choosing your type Machines with an display screen There are two methods available to connect your machine to a wireless network using the (WPS) button on the control panel. The Push Button Configuration (PBC) method allows you to c...
Dieses Handbuch ist für folgende Modelle:Drucker - ML-2950D (10.94 mb)
Drucker - ML-2950DR (10.94 mb)
Drucker - ML-2950ND (10.94 mb)
Drucker - ML-2950ND/GOV (10.94 mb)