Stimmen - 5, Durchschnittliche Bewertung: 3.8
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
If set to ON, the printer will pick up the paper from the Automatic input tray after fifteen seconds. Otherwise, the printer will wait for you to load paper in the Manual Tray. • Jam Recovery determines what action the printer should take when a paper jam occurs. When set to OFF, the printer does not reprint a page that has jammed. When set to ON, the printer keeps the image in memory for a printed page until the printer signals that the page has successfully printed. The printer reprints all jammed pages. • Altitude With this option checked, you can optimize the print quality for a low pressure area, such as a high ground. JOB • Timeout determines the amount of time (in seconds) the printer will wait before printing the last page of a print job that does not end with a command to print the page or a formfeed character. Valid range is 0 to 300 seconds. • Paper Type provides the printer with information about the type of paper to be used for a print job. For the best result, set this to the paper type you loaded in the paper tray in the printer. When using the plain paper, set this to Plain paper. • SRT Mode makes the printer optimize the print quality to 1200 dpi class image quality. A.26 APPENDIX Printing from DOS Applications TEST Demonstration Page prints the demonstration page. It shows features, the specifications, a list of the user default settings and the amount of printer memory available for printing. PCL 5e • Typeface allows you to select the desired typeface. This setting is ignored when the software application specifies a font. • Symbol Set determines the symbol set. A symbol set is a set of alphabetic and numeric characters, punctuation, and special symbols used when printing with a selected font. • Pitch sets the font pitch (only if you have selected a scalable monospaced font). Pitch refers to the number of fixed-space characters in a horizontal inch of type. • Lines Per Page sets the number of lines that print on each page. The setting can range from 5 to 128 lines per page. • Point Size sets the font point size (only if you have selected a scalable typographic font). Point size refers to the height of the characters in the font. One point equals approximately 1/72 of an inch. You can select point sizes from 4.0 to 999.75 in increments of 0.25 points. • Courier determines the courier font type: Regular or Dark. APPENDIX A.27 Linux Driver Installation This Linux driver is designed for Samsung ML-1250 printer and supports Linux Red Hat 6.0 or higher and Intel Linux. If your Linux version is not included, this driver might not work properly. Install Setup Script file configuration a. /cdrom/linux/install.sh b. /cdrom/linux/ssprt.db c. /cdrom/linux/readme.txt Installation 1. Mount the CD-ROM drive. To install the driver, open the x terminal screen and take the following steps: Note: To mount the CD-ROM drive, you must be a super user or must be authorized to mount the CD-ROM by the super user. If you fail to mount the CD-ROM drive, ask the system administrator. To mount the CD-ROM drive: 1 Insert the Samsung ML-1250 CD-ROM into the CD-ROM drive. 2 Mount the CD-ROM drive under a directory like /mnt in order to access the files on the CD-ROM: >mount -t iso9660 /dev/cdrom /mnt/cdrom A.28 APPENDIX Linux Driver Installation 2. Install setup script. For details on installing the setup script, refer to the /cdrom/linux/readme.txt file. Add the driver to the printer list by typing in: /cdrom/linux>install.sh (or) /cdrom/linux>./install.sh (if the path of the current working directory is not determined.) 3. Set up the printer filter. To set up: 1 Run printtool at x terminal. 2 To add the printer driver, click the Add button. 3 In the Add a Printer Entry window, decide the printer type you will use. Select Local Printer if you have a PC- connected printer. 4 Click the OK button. 5 If the Info button appears, ignore it, then click the OK button. 6 The Edit xxxx Entry window opens (where xxxx is the printer type you have selected at step 3). If you are not an advanced user, do not change the Names/Spool Directory/File Limit in Kb/Printer Device option. 7 Click the Select button in the Input Filter to access filter setup. 8 Select Samsung Printer PCL 5e Compatible for the Printer Type item. Then select the default resolution and paper size. 9 To save the setting, press the OK button. 10 In the Edit xxxx Entry window, press the OK button to complete the printer driver installation. 11 You can find that the printer driver is added to the driver window. Select Quit from the PrintTool menu. APPENDIX A.29 Installing Optional Memory Card Your printer is a full-featured laser printer that has been optimized to meet most of your printing needs. Recognizing that each user may have different requirements, however, Samsung makes the optional memory card available to enhance the printer’s capabilities. Precautions DISCONNECT THE POWER CORD: Never remove the printer control board while the printer is plugged in. To av...
Dieses Handbuch ist für folgende Modelle:Drucker - ML-1250 (3.68 mb)