Stimmen - 4, Durchschnittliche Bewertung: 5
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
Do not use paper with a coloured coating that was added after the paper was produced. • Preprinted forms must be printed with nonflammable, heat- resistant inks that do not melt, vaporize, or release hazardous emissions when subject to the printer’s approximately 400°F (205°C) fusing temperature for 0.1 second. • Store paper in its ream wrapper until ready to use. Place cartons on pallets or shelves, not on the floor. • Do not place heavy objects on top of the paper, whether it is packaged or unpackaged. • Keep paper away from moisture, direct sunlight, or other conditions that can cause it to wrinkle or curl. NOTE: Do not use carbonless paper or tracing paper. They are unstable at the fusing temperature and can give off fumes, or cause damage to the paper. 3.4 USING PRINT MATERIALS Selecting the Output Location The printer has two output locations; the rear output tray and the top output tray. 3 Top output tray Rear output tray To use the top output tray, be sure that the rear output tray is closed. To use the rear output tray, open it. NOTES: • If paper coming out of the top output tray has problems, such as excessive curl, try printing to the rear output tray. •To avoid paper jams, do not open or close the rear output tray while the printer is printing. Printing to the Top Output Tray (Face down) The top output tray collects paper face-down, in the order in which it was printed. The top output tray should be used for most print jobs. NOTE: If you continuously print many pages, the surface of the output tray may become hot. Be careful not to touch the surface, and especially keep children away from the surface. USING PRINT MATERIALS 3.5 Printing to the Rear Output Tray (Face up) The printer always prints to the rear output tray if it is open. Paper comes out of the printer face-up, and each time a sheet of paper comes out, it falls down from the printer. Printing from the Multi-Purpose Tray to the rear output tray provides a straight paper path. Opening the rear output tray might improve the output quality with the following: • envelopes • labels • transparencies To open the rear output tray: 1 Open the rear door by pulling it down. The cover functions as the output tray. CAUTION: The fusing area at the rear portion of the inside of your printer is hot when powered. Be careful not to be burned when accessing this area. 3.6 USING PRINT MATERIALS 2 If you do not want to use the rear output tray, close the tray. The pages will stack on the top output tray. 3 Loading Paper Proper paper loading helps prevent paper jams and ensure trouble-free printing. Do not remove the paper tray while a job is printing. Doing so may cause a paper jam. See “Sizes and Capacities” on page 3.3 for acceptable paper size and capacities for each tray. The paper level bar on the front of the paper tray(s) shows the amount of paper currently left in the tray. When the tray is empty, the indicator drops to the bottom. Paper full • Paper empty USING PRINT MATERIALS 3.7 Using Tray1 or the Optional Tray2 Tray1 and the optional Tray2 can hold up to 250 sheets of paper. See “Sizes and Capacities” on page 3.3 for acceptable paper size and capacities of each tray. Tray1 Optional Tray2 Load a stack of paper into the tray and print. For details about loading paper in Tray1 or the optional Tray2, see “Loading Paper” on page 2.7. Using the Multi-Purpose Tray The multi-Purpose Tray is located in the front of your printer. It can be closed when you are not using it, making the printer more compact. Multi-Purpose Tray The Multi-Purpose Tray can hold several sizes and types of paper, such as transparencies, cards, and envelopes. You may also want to use the Multi-Purpose Tray for single page print jobs on letterhead, coloured paper for use as separator sheets, or other special materials that you do not normally keep in the paper tray. You can load approximately 50 sheets of plain paper, 5 envelopes, 5 transparencies, 5 sheets of card stock or 5 labels at a time. 3.8 USING PRINT MATERIALS • Load only one size of print material at a time in the Multi-Purpose Tray. •To prevent paper jams, do not add paper when there is still paper in the Multi-Purpose Tray. This also applies to other types of print materials. • Print materials should be loaded face up with the top edge going into the Multi-Purpose Tray first and be placed on the centre of the tray. • Do not place objects on the Multi-Purpose Tray. Also avoid pressing down or applying excessive force on it. The tray may fall from the printer. To load paper in the Multi-Purpose Tray: 31 Pull the Multi-Purpose Tray down towards you. 2 Unfold the extender to extend the tray to its full-length to hold longer paper. USING PRINT MATERIALS 3.9 3 Prepare a stack of paper for loading by flexing or fanning the paper back and forth. Straighten the edges on a level surface. 4 Place paper on the centre of the tray with the print side face up. Pay attention to the paper limit mark on the left inside wall of the tray...