Stimmen - 3, Durchschnittliche Bewertung: 4
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
• Remove the sealing tape from the imaging unit. • Thoroughly roll the toner cartridge five or six times, and reinstall it. • Turn the machine off and turn it on again. Did not supply enough toner. Please open/close door The machine received several papers with many images, and it cannot supply the toner properly. Open side door and close it. If the problem still persists, please call for service. Fax memory is almost full. Print or remove received fax Job There is no more available fax memory. No more fax data can be received. Delete the received fax data in the memory to secure memory. Call for service. Fax memory is full. Print or remove received fax Job Available fax memory is now 1MB. Delete the received fax data in the memory to secure memory. Call for service. Finisher door is open. Close it The finisher cover is not securely latched. Close the finisher until it locks into place. MESSAGE MEANING SUGGESTED SOLUTIONS Finisher error: [zzz]. There is a problem in Turn the machine off Please turn off then the finisher unit. and reinstall the finisher on again. Check that the finisher cable is connected properly. If the problem persists, please call for service. Fuser error: [zzz]. Please turn off then on There is a problem in the fuser unit working. Turn the machine off and turn it on again. If the problem persists, please call for service. Fuser unit is not installed correctly. Install it The fuser unit is not installed or correctly. Install the fuser unit. Call for service. End of life, ReplaceThe toner in the Replace the imaging with new imaging imaging unit has run unit with a Samsungunit out. genuine toner cartridge. (See "Replacing the imaging unit" on page 87.) Imaging unit is not compatible. Check user’s guide The imaging unit youhave installed is not for your machine. Install a Samsunggenuine imaging unit, designed for your machine. Imaging unit is not The imaging unit isInstall the imaging unit. installed. Install it not installed, or the CRUM (Consumer Replaceable UnitMonitor) in the cartridge is not connected. If it is already installed, try to reinstall theimaging unit. If the problem persists, please call for service. Replace with new The imaging unit is atReplace a imaging unit imaging unit the end of its life. with a Samsung- When the imaging unit genuine imaging unit. replacement message(See "Replacing the appears on the screen imaging unit" on and if you select page 87.) Continue, this message displays. LSU error: [zzz]. Please turn off then on There is a problem in the control of LSU unit. Turn the machine off and turn it on again. If the problem persists, please call for service. Motor does not operate: [zzz]. Please turn off then on There is a problem in the control of motor unit. Turn the machine off and turn it on again. If the problem persists, please call for service. Original paper does The lead edge of theOpen the DADF cover not feed in scanner document failed to actuate the scan sensor within the correct time after actuating the registration sensor. and remove jammedoriginal. (See "Clearing document jams" onpage 89.) MESSAGE MEANING SUGGESTED SOLUTIONS Original paper is tooOversized document Open the DADF cover long for scanner.or double-feeding of and remove the Check size originals. jammed original. (See"Clearing document jams" on page 89.) Check the document size whether it is supported. (See "DADF document size" on page 115.) Original paper jam The originals are Open the DADF cover in front of scanner jammed in DADF. and remove the jammed original. (See"Clearing document jams" on page 89.) Original paper jam in front of scanner duplex path Paper has jammedduring duplex printing in the DADF. Clear the jam. (See"Clearing document jams" on page 89.) Original paper jam The lead edge of theOpen the DADF cover inside of scanner document failed to actuate the gatesensor within the correct time after actuating the scan sensor. When the machine is on, jammed paper isdetected in the DADF. and remove the jammed original. (See"Clearing document jams" on page 89.) Original paper jam The lead edge of theLift up the document while reversing document failed to input tray and remove paper in scanner actuate the duplex sensor within the correct time when the document was fed the wrong way. the jammed original. (See "Clearing document jams" on page 89.) Paper jam at exit offinisher Paper jammed in the stacker exit part. Pull jammed paper from the stacker exit. Paper Jam at the bottom of duplexpath Paper has jammedduring duplex printing. Clear the jam. (See "In the duplex unit area" onpage 96.) Paper Jam at the top of duplex path Paper Jam in exit Paper has jammed inClear the jam. (See "In area the fuser area. the fuser area or around the toner cartridge" on page 95.) Paper jam in front offinisher Paper jammed in the stacker. Open the stacker door and remove jammed paper by lowering guide 1a or 1b. Paper jam insidefinisher Paper Jam in MP tray Paper Misfed from multi-purpose tray Clear the jam...
Dieses Handbuch ist für folgende Modelle:Drucker - SCX-6545N (20.13 mb)
Drucker - SCX-6545N/CAS (20.13 mb)
Drucker - SCX-6545N/KRA (20.13 mb)
Drucker - SCX-6545N/KRC (20.13 mb)