Stimmen - 2, Durchschnittliche Bewertung: 3
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
Ensure that the paper level is below the paper capacity mark on the inside of the tray. • Do not remove paper from the tray while your machine is printing. • Flex, fan, and straighten paper before loading. • Do not use creased, damp, or highly curled paper. • Do not mix paper types in a tray. • Use only recommended print media. (See "Setting the paper size and type" on page 40.) • Ensure that the recommended side of the print media is facing down in the tray, or facing down in the multi-purpose tray. • If paper jams occur frequently when you print on A5/B5-sized paper: Load the paper into the tray with the long edge facing the front of the tray. If load the paper this way, printing both sides of the paper (Duplex) is not supported. In the printer properties window, set the page orientation to be rotated 90 degrees. See Software section. CLEARING DOCUMENT JAMS_ When an original jams while passing through the DADF, the warming message appears on the display screen. A To avoid tearing the document, remove the jammed document gently and slowly. To prevent document jams, use the scanner glass for thick, thin, or mixed paper-type originals. 1. Remove any remaining pages from the DADF. 2. Open the DADF cover. 3. Gently remove the jammed paper from the DADF. If you see no paper in this area, refer to Roller misfeed. (See "Roller misfeed" on page 100.) Close the DADF cover. Then reload the pages you removed, if any, in the DADF. 99 troubleshooting Misfeed of exiting paper 1. Remove the remaining documents from the DADF. 2. Open the DADF cover. 3. Open the document input tray upwards and pull the document gently out of the DADF. 4. Close the DADF cover and the document input tray. Then place the documents back in the DADF. 100 _T roubleshooting Roller misfeed 1. Open the scanner lid. 2. Grasp the misfeed paper, and remove the paper from the feed area by carefully pulling it to the right using both hands. 1 scanner lid If you do not see the paper in this area, stop and go to step 3. 3. Open the white document background. 4. Remove the paper from the feed area by carefully pulling. 5. Close the white document background and the scanner lid. Then load the removed pages back into the DADF. CLEARING PAPER JAMS When a paper jam occurs, the warming message appears on the display screen. Refer to the table below to locate and clear the paper jam. MESSAGE LOCATION OF JAM GO TO Paper Jam in tray 1, Paper Jam in tray 2, Paper Jam in tray 2 (HCF), Paper Jam in tray 3, Paper Jam in tray 3 (HCF), Paper Jam in tray 4, Paper Jam in MP tray In the paper feed area (tray 1, optional tray, or multi-purpose tray) See "In the multipurpose tray" on page 105. See "In the optional tray" on page 102. See "In the optional high capacity feeder" on page 103. Paper Jam in exit area In the fuser area or around the toner cartridge See "In the fuser area or around the toner cartridge" on page 105. Paper Jam inside of machine In the paper exit area See "In the paper exit area" on page 105. Paper Jam at the bottom of duplex path, Paper Jam at the top of duplex path, Paper Jam inside of duplex path In the duplex unit See "In the duplex unit area" on page 106. Paper jam in front of finisher In the stacker unit See "Paperjam in front of finisher" on page 106. Paper jam inside finisher, Paper jam inside finisher’s duplex In the stacker unit See "Paperjam inside finisher, Paperjam inside finisher’s duplex" on page 106. Paper jam at exit of finisher In the stacker unit See "Paperjam at exit of finisher" on page 107. A To avoid tearing the paper, pull the jammed paper out gently and slowly. Follow the instructions in the following sections to clear the jam. In the tray 1 1. Pull out the paper tray to open. After you pull it out completely, lift the front part of the tray up slightly to release the tray from the machine. 2. Remove the jammed paper by gently pulling it straight out. Once you remove the jammed paper here, open the side cover and then close it to clear the error message on the display. If there is any resistance, and the paper does not move immediately when you pull, stop pulling. Then: 3. Open the side cover. Troubleshooting_ 101 Tff\ Do not touch the shiny imaging unit surface. Scratches or smudges will result in poor print quality. 4. Carefully remove the misfeed paper in the direction shown. 5. Close the side cover and insert the paper tray. Lower the rear part of the Tray to align the rear edge with the corresponding slot of the machine, then insert it completely. 102 _T roubleshooting In the optional tray C7ffI This part explains the method of removing the jammed paper in the «—I optional tray 2. Please refer to the next method for other optional trays, since the method is same as the tray 2. 1. Open the outer cover in tray 2. 2. Open the inner cover of tray 2. 3. Pull the jammed paper out in the direction shown. To avoid tearing the paper, pull it out gently and slowly. If the pa...
Dieses Handbuch ist für folgende Modelle:Drucker - SCX-6545N (12.36 mb)
Drucker - SCX-6545N/CAS (12.36 mb)
Drucker - SCX-6545N/KRC (12.36 mb)
Drucker - SCX-6545N/KRD (12.36 mb)