Anleitung Samsung, modell SCX-6322DNG
Hersteller: Samsung
Dateigröße: 4.17 mb
Dateiname:
Unterrichtssprache:
|
 
|
|
|
Link zum kostenlosen Download Hinweise finden Sie am Ende der Seite
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
Also try rotating the paper 180° in the tray. An unknown image repetitively appears on a next few sheets or loose toner, light print, or contamination occurs. You printer is probably being used at an altitude of 2,500 m(8,200 ft)or above. The high altitude may affect the print quality such as loose toner or light imaging. You can set this option through Printer Settings Utility or Printer Tab in printer driver’s properties. Refer to the Software Section for detail. Copying problems Condition Suggested solutions Copies are too light or too dark. Use Darkness to darken or lighten the background of the copies. Smears, lines, marks, or spots appears on copies. • If defects are on the original, press Darkness to lighten the background of your copies. • If no defects are on the original, clean the scan unit. See page 13.2. Copy image is skewed. • Ensure that the original is face down on the scanner glass or face up in the ADF. • Check that the copy paper is loaded correctly. Blank copies print out. Ensure that the original is face down on the scanner glass or face up in the ADF. 14.15 Condition Suggested solutions Image rubs off the • Replace the paper in the tray with paper copy easily. from a new package. • In high humidity areas, do not leave paper in the machine for extended periods of time. Frequent copy • Fan the stack of paper, then turn it over in paper jams occur. the tray. Replace the paper in the tray with a fresh supply. Check/adjust the paper guides, if necessary. • Ensure that the paper is the proper paper weight. 75 g/m2 bond paper is recommended. • Check for copy paper or pieces of copy paper remaining in the machine after a paper jam has been cleared. Toner cartridge • Your originals may contain pictures, solids, produces fewer or heavy lines. For example, your originals copies than may be forms, newsletters, books, or other expected before documents that use more toner. running out of • The machine may be turned on and off toner. frequently. • The scanner lid may be left open while copies are being made. Scanning problems Condition Suggested solutions The scanner does not work. • Make sure that you place the original to be scanned face down on the scanner glass, or face up in the ADF. • There may not be enough available memory to hold the document you want to scan. Try the Prescan function to see if that works. Try lowering the scan resolution rate. • Check that the USB or parallel cable is connected properly. • Make sure that the USB or parallel cable is not defective. Switch the cable with a known good cable. If necessary, replace the cable. • If you are using a parallel cable, ensure that it is compliant with IEEE 1284 standards. • Check that the scanner is configured correctly. Check scan setting in the SmarThru Configuration or the application you want to use to make certain that the scanner job is being sent to the correct port. Condition Suggested solutions The unit scans • Check if the machine is printing received very slowly. data. If so, scan the document after the received data has been printed. • Graphics are scanned more slowly than text. • Communication speed slows in scan mode because of the large amount of memory required to analyze and reproduce the scanned image. Set your computer to the ECP printer mode through BIOS setting. It will help to increase the speed. For details about how to set BIOS, refer to your computer user’s guide. Message appears • There may be a copying or printing job in on your computer progress. When that job is complete, try your screen: job again. • “Device can't be • The Selected port is currently being used. set to the H/W Restart your computer and try again. mode you want.” • The printer cable may be improperly • “Port is being connected or the power may be off. You must used by another use a parallel cable that supports IEEE 1284 program.” bi-directional communications. •“Port is • The scanner driver is not installed or the Disabled.” operating environment is not set up properly. • “Scanner is busy • Ensure that the machine is properly receiving or connected and the power is on, Then restart printing data. your computer. When the • The USB cable may be improperly connected current job is or the power may be off. completed, try • Do not use parallel and USB cables at the again.” same time. • “Invalid handle.” • “Scanning has failed.” 14.16 Network Scan problems Condition Suggested solutions I cannot find a scanned image file. You can check the scanned file’s destination in the Advanced page in the Network Scan program’s Properties screen. I cannot find the scanned image file after scanning. • Check if the scanned file’s application is on your computer. • Check Send image immediately to the specified folder using an associated default application in the Advanced page in the Network Scan program’s Properties screen to open the scanned image immediately after scanning. I forgot my ID and PIN. Check your ID and PIN in t...
Dieses Handbuch ist für folgende Modelle:
Drucker - SCX-6122FN (4.17 mb)
Drucker - SCX-6322DN (4.17 mb)
)