Stimmen - 3, Durchschnittliche Bewertung: 4.3
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
White Spots If white spots appear on the page: •The paper is too rough and a lot of dirt from a paper falls to the inner devices within the machine, so the transfer roller may be dirty. Clean the inside of your machine (See "Cleaning the inside" on page 74). •The paper path may need cleaning (See "Cleaning the inside" on page 74). Vertical lines .. If black vertical streaks appear on the page: •The surface (drum part) of the toner cartridge inside the machine has probably been scratched. Remove the toner cartridge and install a new one (See "Replacing the toner cartridge" on page 89). If white vertical streaks appear on the page: •The surface of the LSU part inside the machine may be dirty (See "Cleaning the inside" on page 74). Black background If the amount of background shading becomes unacceptable: •Change to a lighter weight paper (See "Print media specifications" on page 93). •Check the environmental conditions: very dry conditions or a high level of humidity (higher than 80% RH) can increase the amount of background shading. •Remove the old toner cartridge and, install a new one (See "Replacing the toner cartridge" on page 89). Toner smear If toner smears on the page: •Clean the inside of the machine (See "Cleaning the inside" on page 74). •Check the paper type and quality (See "Print media specifications" on page 93). •Remove the toner cartridge and then, install a new one (See "Replacing the toner cartridge" on page 89). Vertical repetitive defects If marks repeatedly appear on the printed side of the page at even intervals: •The toner cartridge may be damaged. If you still have the same problem, remove the toner cartridge and, install a new one (See "Replacing the toner cartridge" on page 89). •Parts of the machine may have toner on them. If the defects occur on the back of the page, the problem will likely correct itself after a few more pages. •The fusing assembly may be damaged. Contact a service representative. Background scatter A Background scatter results from bits of toner randomly distributed on the printed page. •The paper may be too damp. Try printing with a fresh ream of paper. Do not open packages of paper until necessary so that the paper does not absorb too much moisture. •If background scatter occurs on an envelope, change the printing layout to avoid printing over areas that have overlapping seams on the reverse side. Printing on seams can cause problems. •If background scatter covers the entire surface area of a printed page, adjust the print quality through your software application or in Printing Preferences (See "Opening printing preferences" on page 55). Toner particles are around bold characters or pictures The toner might not adhere properly to this type of paper. •Change the printer option and try again. Go to the Printing Preferences, click the Paper tab, and set the paper type to Recycled. Misformed characters •If characters are improperly formed and producing hollow images, the paper stock may be too slick. Try different paper (See "Print media specifications" on page 93). Page skew AaBbCAaBbCAaBbCAaBbCAaBbCc •Ensure that the paper is loaded properly. •Check the paper type and quality (See "Print media specifications" on page 93). •Ensure that the guides are not too tight or too loose against the paper stack. Curl or wave •Ensure that the paper is loaded properly. •Check the paper type and quality. Both high temperature and humidity can cause paper curl (See "Print media specifications" on page 93). •Turn the stack of paper over in the tray. Also try rotating the paper 180° in the tray. Wrinkles or creases •Ensure that the paper is loaded properly. •Check the paper type and quality (See "Print media specifications" on page 93). •Turn the stack of paper over in the tray. Also try rotating the paper 180° in the tray. Back of printouts are dirty Check for leaking toner. Clean the inside of the machine (See "Cleaning the inside" on page 74). Solid Color or Black pages A •The toner cartridge may not be installed properly. Remove the cartridge and reinsert it. •The toner cartridge may be defective. Remove the toner cartridge and install a new one (See "Replacing the toner cartridge" on page 89). •The machine may require repair. Contact a service representative. Loose toner •Clean the inside of the machine (See "Cleaning the inside" on page 74). •Check the paper type and quality (See "Print media specifications" on page 93). •Remove the toner cartridge and then, install a new one (See "Replacing the toner cartridge" on page 89). •If the problem persists, the machine may require repair. Contact a service representative. Character Voids A Character voids are white areas within parts of characters that should be solid black: •If you are using transparencies, try another type of transparency. Because of the composition of transparencies, some character voids are normal. •You may be printing on the wrong surface of the paper. Remove the paper and turn it over. •The paper may not me...
Dieses Handbuch ist für folgende Modelle:Drucker - SCX-3200 (10.73 mb)
Drucker - SCX-3201 (10.73 mb)
Drucker - SCX-3201G (10.73 mb)
Drucker - SCX-3205 (10.73 mb)