Stimmen - 3, Durchschnittliche Bewertung: 3.7
(
)
)
|
Anleitung Zusammenfassung
Check the maximum input number of media for each tray. (See "Print media specifications" on page 92.) Envelope Successful printing on envelopes depends upon the quality of the envelopes. To print an envelope, place it flap side up with the stamp area bottom the top right side. The weight of the envelope paper should not exceed 90 g/m2 otherwise, jam may occur. Prior to printing, envelopes should lie flat with less than 6 mm curl, and should not contain air. Envelopes should not be wrinkled, nicked, nor damaged. Use envelopes that are compatible with the heat and pressure of the machine during operation. Transparency To avoid damaging the machine, use only transparencies designed for use in laser printers. In case of color printing using transparencies, the picture quality would be lower than mono printing when the printouts are used on the overhead projector. Base type transparency (ex. Xerox 3R3117) results in better image and paper handling quality than paper backed (ex. Xerox 3R3028) or removable stripe (3R3108) ones. Labels To avoid damaging the machine, use only labels designed for use in laser machines. The adhesive material should be stable at your machine’s fusing temperature. Check your machine’s specification to view the fusing temperature. (See "General specifications" on page 91.) Only use labels with no exposed backing between them. Labels can peel off sheets that have spaces between the labels, causing serious jams. Prior to printing, labels must lie flat with no more than 13 mm of curl in any direction. Do not use labels with wrinkles, bubbles, or other indications of separation. Card stock/ Custom-sized paper Letterhead / Preprinted paper Used paper When loading used paper, printed side should be facing up with an uncurled edge at the front. If you experience problems with paper feed, turn the paper around. Note that print quality is not guaranteed. Photo Glossy Load one paper to the multi-purpose tray at a time, glossy side facing down. Setting the paper size and type The settings made from the machine driver override the settings on the control panel. 1.Press on the control panel. 2.Press up/down arrow to highlight Paper and press OK. 3.Press up/down arrow to select the paper tray you want press OK. 4.Press up/down arrow to highlight Paper Size and press OK. 5.Press up/down arrow to select the paper size you want. 6.Press OK to save the selection. 7.Press up/down arrow to highlight Paper Type and press OK. 8.Press up/down arrow to select the paper type you want. 9.Press OK to save the selection. 10.Press . 11.Press up/down arrow to highlight Paper Source and press OK. 12.Press up/down arrow to select the paper tray you want. 13.press OK to save the selection. 14.Press to return to ready mode. If you want to use special-sized paper-such as a billing paper, select Custom in the Paper tab in the Printing Preferences. (See "Opening printing preferences" on page 48.) Using the output support The surface of the output tray may become hot if you print a large number of pages at once. Make sure that you do not touch the surface, and do not allow children near it. 6.printing This chapter explains common printing tasks. This chapter includes: The procedures in this chapter are mainly based on Windows 7. Basic printing Printing The following Printing Preferences window is for Notepad in Windows 7. 1.Open the document you want to print. 2.Select Print from the File menu. 3.Select your machine from the Select Printer list. 4.The basic print settings including the number of copies and print range are selected within the Print window. To take advantage of the advanced printing features, click Properties or Preferences from the Print window (see "Opening printing preferences" on page 48). 5.To start the print job, click OK or Print in the Print window. Canceling a print job If the print job is waiting in the print queue or print spooler, cancel the job as follows: Opening printing preferences 1.Open the document you want to print. 2.Select Print from the file menu. 3.Select your machine from the Select Printer. 4.Click Properties or Preferences. You can check the machine's current status using the Printer Status button. Using a favorite setting The Presets option, which is visible on each preferences tab except for the Samsung tab, allows you to save the current preferences for future use. To save a Presets item, follow these steps: 1.Change the settings as needed on each tab. 2.Enter a name for the item in the Presets input box. 3.Click (Add). When you save Presets, all current driver settings are saved. Select more options and click (Update), settings will be added to the Presets you made. To use a saved setting, select it from the Presets drop-down list. The machine is now set to print according to the settings you have selected. To delete saved settings, select it from the Presets drop-down list and click (Delete). You can also restore the printer driver’s default settings by selecting Default Preset ...
Dieses Handbuch ist für folgende Modelle:Drucker - CLP-775ND (12.81 mb)
Drucker - CLP-775ND/CAS (12.81 mb)
Drucker - CLP-775N (12.81 mb)
Drucker - Color Laser Printer w/ Duplex CLP-775 (12.81 mb)