Anleitung Samsung, modell CLP-612NDK
Hersteller: Samsung
Dateigröße: 4.18 mb
Dateiname:
Unterrichtssprache:
|
 
|
|
|
Link zum kostenlosen Download Hinweise finden Sie am Ende der Seite
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
Adjusting... Registration The machine is adjusting the color registration. Wait a few minutes. Deve Motor Locked There is a problem with the development motor to machines which moves the toner supply device. Cycle power. If the problem persists, contact the service representatives. Door Open/Check Transfer Belt The front cover or the top cover is not securely latched. Close the cover until it locks into place. 7.7 Message Explanation Solution Duplex Jam 0 Paper has jammed Clear the jam. Check Inside during duplex (Page 7.1) printing. This is applicable only to machines with this feature. Fuser Fan There is a problem Cycle power. If the Locked with the fan for the problem persists, fuser unit. contact the service representatives. Install The transfer belt is Install a Samsung- Transfer Belt not installed. genuine transfer belt. (Page 8.1, Page 6.6) Install Toner The toner cartridge is installed Reinstall the toner cartridge two or three improperly, or not installed. times to confirm it is seated properly. If the problem persists, the toner cartridge is not being detected. Contact the service representatives. Invalid Toner The toner cartridge which the arrow Install the corresponding toner indicates is not suitable for your cartridge with a Samsung-genuine machine. cartridge. (Page 6.4) Invalid Transfer Belt The transfer belt is not suitable for your machine. Reinstall the transfer belt two or three times to confirm it is seated properly. Make sure that the transfer belt is Samsung-genuine product. If the problem persists, contact the service representatives. IP Conflict The network IP address you have Check the IP address and reset it if set is being used by someone else. necessary. (Page 3.2) Load Manually The multi-purpose Load paper in the Press Stop Key tray is empty in multi-purpose tray. manual feed mode. (Page 4.6) Load There is no Load corresponding [xxx] In [yyy] corresponding paper paper in the in the corresponding corresponding tray. tray. (Page 4.4) Message Explanation Solution Low Heat Error The fuser unit is low-Cycle power. If the Cycle Power heated. problem persists, contact the service representatives. OPC Motor There is a problem Cycle power. If the Locked with the main motor problem persists, for the machine. contact the service representatives. MP Tray Paper has jammed Clear the jam. Paper Jam 0 in the multi-purpose (Page 7.3) tray. New Fuser The problem has Cycle power. If the Error occurred in the problem persists, newly installed fuser contact the service unit. representatives. Non SAMSUNG The toner cartridge You can select either Toner which the arrow indicates is not a Samsung-genuine cartridge. Stop Stop or Continue with the left/right arrow. If you select Stop by pressing OK on the control panel, the machine stops printing. If you select Continue, the machine keeps printing, but the quality cannot be guaranteed. If you do not select any, the machine will work as if Stop is selected. Replace the corresponding toner cartridge with a Samsung-genuine cartridge. (Page 6.4) Paper Jam 0 Paper has jammed Clear the jam. Open/Close Door in the paper feed (Page 7.1) area and inside the machine. Paper Jam 1 Paper has jammed Clear the jam. Open/Close Door inside the machine. (Page 7.1) Paper Jam 2 Special print media Clear the jam. Check Inside has jammed in the (Page 7.5) paper exit area. 7.8 Message Explanation Solution Replace Fuser The life of the fuser unit is expired. Replace the fuser unit with a new one. Contact the service representatives. Replace Fuser The life of the fuser Replace the fuser unit Soon unit will be expired with a new one. soon. Contact the service representatives. Replace Transfer Belt The life of the transfer belt is expired. Replace the paper transfer belt with a new one. Contact the service representatives. Replace Transfer The life of the Replace the transfer Belt Soon transfer belt will be belt with a new one. expired soon. Contact the service representatives. Replace [yyy] The life of the tray Replace the pick-up Pick-Roller pick-up roller has roller with a new one. expired. Contact the service representatives. Self Diagnostics LSU The LSU (Laser Scanning Unit) in your machine is Wait a few minutes. checking problems detected. Self Diagnostics The engine in your Wait a few minutes. Temperature machine is checking problems detected. Sleeping... The machine is in the power save When data is received, it switches mode. to on-line automatically. System Fan There is a problem Cycle power. If the Locked with the main fan for problem persists, the machine. contact the service representatives. Message Explanation Solution Toner Empty The toner cartridge which the arrow indicates has run out. Stop Note If the black toner cartridge is empty, Black Only message does not appear. You can select the option among Stop, Continue or Black Only with the left/right arrow. If you select Stop by pressing OK on the control panel, the machine stops p...
Dieses Handbuch ist für folgende Modelle:
Drucker - CLP-605NDK (4.18 mb)
Drucker - CLP-605NDKG (4.18 mb)
Drucker - CLP-610ND (4.18 mb)
Drucker - CLP-611NDK (4.18 mb)
