Stimmen - 3, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
Starting the program 1. Connect your machine and the computer using crossover network cable. 2. Temporarily disable the computer firewall before continuing by doing the following: Windows XP • Open Control Panel. • Double click Security Center. • Click Windows Firewall. • Disable the firewall. Macintosh OS • Open System Preferences. • Click Sharing. • Click the Firewall menu. • Turn firewall off. 3. From the Windows Start menu, select All Programs > Samsung Network Printer Utilities > SetIP > SetIP. 4. Click on the icon (third from left) in the SetIP window to open the TCP/IP configuration window. Getting started_27 5. Enter the machine’s new information into the configuration window as follows: • MAC Address : Find the machine’s MAC address from the Network Configuration Report and enter it without the colons. For example, 00:15:99:29:51:A8 becomes 0015992951A8. MAC address is a hardware serial number of the machine’s network interface and can be found in the Network Configuration Report. • IP Address: Enter a new IP address for your printer the same as the computer’s IP address except for the last number. For example, if your computer’s IP address is 192.168.1.150, enter 192.168.1.X. (X is number between 1 and 254 other than the computer’s address.) • Subnet Mask: Enter this exactly the same as the computer’s Subnet Mask. • Default Gateway: Enter this exactly the same as the computer’s Default Gateway. 6. Click Apply, and then click OK. The machine will automatically print the Configuration report. Confirm that all the settings are correct. 7. Click Exit to close the SetIP program. 8. If necessary, restart the computer’s firewall. Network parameter setting You can also set up the various network settings through the network administration programs. • SyncThru™ Web Admin Service: Web-based printer management solution for network administrators. SyncThru™ Web Admin Service provides you with an efficient way of managing network devices and lets you remotely monitor and troubleshoot network machines from any site with corporate internet access. Download this program from solution.samsungprinter.com. • SyncThru™ Web Service: Web server embedded on your network print server, which allows you to: (A) Configure the network parameters necessary for the machine to connect to various network environments. (B) Customize machine settings. Restoring factory default settings You can restore factory default settings to the machine by using SyncThru™ Web Service. You may need to reset the machine to the factory default settings when machine that you are using is connected to new network environment. Restoring factory default settings using SyncThru™ Web Service 1. Start a web browser such as Internet Explorer, Safari or Firefox and enter your machine’s new IP address in the browser window. For example, 2. When the SyncThru™ Web Service window opens, click Network Settings. 3. Click Reset. Then, click Clear for network. 4. Turn off and restart machine to apply settings. Configuring the machine’s wireless network Before starting you will need to know the SSID of your wireless network and the Network Key if it is encrypted. This information was set when the access point was installed. If you do not know about your wireless environment, please ask the person who has set up your network. Using SyncThru™ Web Service Before starting wireless parameter configuration, make sure cable connection status. Configuring the printer’s wireless network 1. Start a web browser such as Internet Explorer, Safari or Firefox and enter your machine’s new IP address in the browser window. For example, 2. When the SyncThru Web Service window opens, click Network Settings. 28 _Getting started 4. Select the one Network Name(SSID) in the list. 3. Click Wireless and Select Wizard. Then, click Next. Wizard will help you setup the wireless network configuration. However, if you want to set the wireless network directly, select Custom. • SSID: SSID(Service Set Identifier) is a name that identifies a wireless network. Access points and wireless devices attempting to connect to a specific wireless network must use the same SSID. The SSID is case-sensitive. • Operation Mode: Operation Mode refers to the type of wireless connections. -Ad-hoc: allows wireless devices to communicate directly with each other in a peer-to-peer environment. -Infrastructure: allows wireless devices to communicate with each other through an access point. If your network’s operation mode is Infrastructure, select the SSID of the access point. If the operation mode is Ad-hoc, select the machine’s SSID. Note that “airportthru” is the default SSID of your machine. 5. Click Next. If wireless security setting window appears, enter the registered password (network key) and click Next. 6.Wizard Setup Confirmation window appears, please check your wireless setup. If the setup is right, click Apply. 7.Click OK. Disconnect the network cable (standard or crossover). Your machine should...
Dieses Handbuch ist für folgende Modelle:Drucker - CLP-310 (4.11 mb)
Drucker - CLP-310K (4.11 mb)
Drucker - CLP-310N (4.11 mb)
Drucker - CLP-315 (4.11 mb)