Stimmen - 1, Durchschnittliche Bewertung: 4
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
Also, it provides you with the Twain driver for scanning on a Macintosh computer. 1 Make sure that you connect your printer to the computer. Turn on your computer and printer. 2 Insert the CD-ROM which came with your printer into the CD-ROM drive. 3 Double-click CD-ROM icon that appears on your Macintosh desktop. 4 Double-click the MAC_Installer folder. 5 Double-click the Installer icon. 6 Enter the password and click OK. 7 The Samsung Installer window opens. Click Continue 8 Select Easy Install and click Install. Easy Install is recommended for most users. All components necessary for printer operations will be installed. If you select Custom Install, you can choose individual components to install. 9 The message which warns all application will close on your computer appears, Click Continue. 10 Select Typical installation for a local printer and then click OK. NOTE: If you select Typical installation for a network printer, see “Using SetIP program” on page 42 after the installation is finished. 11 After the installation is finished, click Quit. NOTE: • If you have installed scan driver, click Restart. • After the installation is finished, see “Setting Up the Printer” on page 42 Uninstalling software Uninstall is required if you are upgrading the software, or if installation fails. 1 Make sure that you connect your printer to the computer. Turn on your computer and printer. 2 Insert the CD-ROM which came with your printer into the CD-ROM drive. 3 Double-click CD-ROM icon that appears on your Macintosh desktop. 4 Double-click the MAC_Installer folder. 5 Double-click the Installer icon. 6 Enter the password and click OK. 7 The Samsung Installer window opens. Click Continue 8 Select Uninstall and click Uninstall. 9 The message which warns all application will close on your computer appears, Click Continue. 10 When the uninstallation is done, click Quit. 41 Using Your Printer with a Macintosh Using SetIP program This program is for the network IP setting using the MAC address which is the hardware serial number of the network printer card or interface. Especially, it is for the network administrator to set several network IPs at the same time. You can only use SetIP program when your machine is connected to a network. SetIP program should be automatically installed during the printer driver installation. NOTE: If you select Typical installation for a network printer during the printer driver installation, the SetIP program automatically runs after the installation. Follow the below instruction. 1 2 The certificate window appears, click Trust. Print the machine’s network information report which includes your machine’s MAC address. 3 Click in the SetIP window to open the TCP/IP 4 configuration window. Enter the network card's MAC address, IP address, subnet mask, default gateway, an...
Dieses Handbuch ist für folgende Modelle:Drucker - CLX-6200ND (9.49 mb)
Drucker - CLX-6210FX (9.49 mb)
Drucker - CLX-6240FX (9.49 mb)
Drucker - CLX-6200FX (9.49 mb)