Stimmen - 2, Durchschnittliche Bewertung: 3
(
)
)
|
Anleitung Zusammenfassung
Darknessb Adjusts the brightness level to make a copy for easier reading, when the original contains faint markings and dark images. 2 ID Copy Allows you to copy both sides of an ID card like a driver’s license on a single side of paper (see "ID card copying" on page 62). 3 Display screen Shows the current status and displays prompts during an operation. 4 Copy Switches to Copy mode. 5 Fax Switches to Fax mode. 6 1 2 3 4 5 7 8 9 10 11 12 20 19 18 17 15 14 13 16 6 Control panel overview 6 Arrows Scrolls through the options available in the selected menu and increases or decreases values. 7 Menu Opens Menu mode and scrolls through the available menus (see "Menu overview" on page 34). 8 OK Confirms the selection on the screen. 9 Numeric keypad Dials a number or enters alphanumeric characters (see "Keypad letters and numbers" on page 214). 10 Address Book Allows you to store frequently used fax numbers or search for stored fax numbers (see "Setting up the fax address book" on page 215). 11 Redial/ Pause Redials the recently sent fax number or received caller ID in ready mode, or inserts a pause(-) into a fax number in edit mode (see "Redialing the fax number" on page 239). 12 Stop/ Clear Stops an operations at any time. 13 Power/ Wakeup Turns the power on or off, or wakes up the machine from the power save mode. If you need to turn the machine off, press this button for more than three seconds when the machine is in ready mode. 14 Start Starts a job. 15 On Hook Dial When you press this button, you can hear a dial tone. Then enter a fax number. It is similar to making a call using speaker phone (see "Receiving manually in Tel mode" on page 245). 16 Back Sends you back to the upper menu level. 17 Scan Switches to Scan mode. 18 Status LED Indicates the status of your machine (see "Understanding the status LED" on page 109). 1. Introduction 27 Control panel overview 19 Eco Turn into eco mode to reduce toner consumption and paper usage when pc-printing and copying only (see "Eco printing" on page 58). 20 Direct USB Allows you to directly print files stored on a USB memory device when it is inserted into the USB port on the front of your machine. a. CLX-330xFW Series only. b. CLX-330xFN Series only. 1. Introduction 28 Turning on the machine Connect the machine to the electricity supply first. Turn the switch on if the machine has a power switch. If you want to turn the power off, press and hold (Power/Wakeup) button for about 3 seconds. Illustrations on this user’s guide may differ from your machine depending 21 on its options or models. Check your machine type (see "Front view" on page 20). Power is turned on automatically. For CLX-330x/330xW Series, press (Power/Wakeup) button on the control panel. 1. Introduction 29 Installing the driver locally A locally connected machine is a machine directly attached to your computer Insert the supplied software CD into your CD-ROM drive. 2 using the cable. If your machine is attached to a network, skip the following If the installation window does not appear, click Start > All programs > steps below and go on to installing a network connected machine’s driver (see Accessories > Run. "Installing driver over the network" on page 154). X:\Setup.exe replacing “X” with the letter, which represents your CDROM drive and click OK. • If you are a Macintosh or Linux operating systems user, refer to the "Installation for Macintosh" on page 145 or "Installation for Linux" on Select Install Now. 3 page 147. • The installation window in this User’s Guide may differ depending on the machine and interface in use. • Only use a USB cable no longer than 3 meters (118 inches). Windows Make sure that the machine is connected to your computer and powered on. If the “Found New Hardware Wizard” appears during the installation procedure, click Cancel to close the window. Follow the instructions in the installation window. 4 1. Introduction 30 Installing the driver locally Installing the driver locally You can select the software applications in the Select Software to Install Window. 1. Introduction 31 Reinstalling the driver If the printer driver does not work properly, follow the steps below to reinstall the driver. Windows Make sure that the machine is connected to your computer and 1 powered on. From the Start menu, select Programs or All Programs > Samsung 2 Printers > your printer driver name > Uninstall. Follow the instructions in the installation window. 3 Insert the software CD into your CD-ROM drive and install the driver 4 again (see "Installing the driver locally" on page 30). 1. Introduction 32 2. Menu Overview and Basic Setup This chapter provides information about the overall menu structure and the basic setup options. • 2. Menu Overview and Basic Setup This chapter provides information about the overall menu structure and the basic setup options. • Menu overview 34 • Machine’s basic settings 40 • Media and tray 42 • Basic printing 54 • Basic copying 60 • Basic scanning 64 • Basic faxing...
Dieses Handbuch ist für folgende Modelle:Drucker - CLX-3300 (18.37 mb)
Drucker - CLX-3303 (18.37 mb)
Drucker - CLX-3303FW (18.37 mb)
Drucker - CLX-3304 (18.37 mb)