Stimmen - 2, Durchschnittliche Bewertung: 4.5 ( )

Hersteller: ALFA Dateigröße: 4.2 mb Dateiname: Unterrichtssprache:

7. Send the print command from your software. 8. When prompted to, press the FORM FEED button on the printer control panel. The printed transparency will exit at the rear. E–32 Chapter 4: The Front Feeder Manual Feed: Heavy (Card) Stock Heavy (Card) Stock Specifications Manual Feed: Heavy (Card) Stock Heavy (Card) Stock Specifications Weight range : 28 - 36 lb. • Use rear paper exit to avoid curling Setting up to Print Heavy Stock 1. In your software program: a. Enter the printer setup menu. b. Select Manual Feed. c. Select the media size. 2. Lower the rear paper exit tray and pull out the rear exit extender. 3. Lower the Front Feeder. 4. Flip out the tray, then pivot out the extender. 5. Adjust the paper width guides. 6. Insert the sheet of heavy stock. 7. Send the print command from your software. 8. When prompted to, press the FORM FEED button on the printer control panel. The printed sheet will exit at the rear. Chapter 4: The Front Feeder E–33 Using the Automatic Tray Switch Feature Using the Automatic Tray Switch Feature To do this: 1. Press ON LINE. The printer goes off-line. 2. Press MENU 1/Menu 2 to enter the Menu Mode. 3. Press MENU 1/Menu 2 again to move to the TRAY SELECT category. 4. Press ENTER. 5. Press MENU 1/Menu 2 twice to move to the AUTO TRAY SWITCH item. 6. Press ©/Reset once to get to the ON selection. 7. Press ENTER to engage the ON selection. An asterisk appears next to ON. 8. Press ON LINE to exit the Menu Mode. Important: Paper tray size settings in your application software and in the OKIPAGE 20 Software Operator Panel will override the printer’s front operator panel settings. If all paper sources have the same paper size selected, the printer will normally feed paper in the following sequence: (1) the first tray (2) the paper expansion tray (if installed) (3) the second paper expansion tray (if installed) (4) the front feeder (5) the multipurpose feeder (if installed). If any paper tray has a different size paper selected, it will be skipped. If you wish to change the sequence, use the Maintenance Menu (see “The User Maintenance Menu” in Chapter 3). E–34 Chapter 4: The Front Feeder Chapter 5: Duplex Printing Note: This chapter applies only to the Model 20DX, or Model 20 with the optional Duplex Feeder installed. Portrait Versus Landscape Portrait: Landscape: Duplex Printing: Windows NT 3.51 The duplex print options are in the Document Properties dialog box. Example: In Windows® NT 3.5, to select duplex printing in Microsoft® Word: 1. Select Print from the File menu. 2. Click Printer. 3. Click Options. 4. Select the duplex print method: Long Side (portrait printing) Short Side (landscape printing) 5. Click OK. 6. Click Close and send the print job. Duplex Printing: Windows® 3.1x The duplex print options are in the Document Properties dialog box. Example: In Windows 3.1x, to select duplex printing in Microsoft Word: 1. Select Print from the File menu. 2. Click Printer. 3. Click Options. 4. Select the Paper Input tab. 6. Click Duplex. 7. Select the duplex print method: Join top to bottom (landscape printing) Join left to right (portrait printing) 8. Click OK. 9. Click OK. 10. Click Close and send the print job. English–35 Duplex Printing: Windows 95 Duplex Printing: Windows 95 Example: In Windows 95, to select duplex printing in Microsoft Word: 1. Select Print from the File menu. 2. Click Properties. 3. Select the Paper tab. 4. Click Duplex. 5. Select the duplex print method: Join top to bottom (landscape printing) Join left to right (portrait printing) 6. Click OK. 7. Click OK and send the print job. Setting Duplex Printing as the Default in Windows 95 1. Click Start, Settings, Printers. 2. Click the right mouse button on the driver icon. 3. Click Properties. 4. Click Duplex. 5. Select the duplex method you wish to use as the default. 6. Click OK. 7. Click OK. Duplex Printing: Windows NT 4.0 The duplex print options are in the Document Properties dialog box. Example: In Windows NT 4.0, to select duplex printing in Microsoft Word: 1. Select Print from the File menu. 2. Click Properties. 3. Select the Advanced tab. 4. Click Paper/Output in the box. 5. Click Print on Both Sides (Duplex Printing). 6. Select the duplex print method: Short Side (landscape printing) Long Side (portrait printing) 7. Click OK. 8. Click OK and send the print job. Setting Duplex Printing as the Default in Windows NT 4.0 1. Click Start, Settings, Printers. 2. Click the right mouse button on the driver icon. 3. Click Document Defaults. 4. Select the duplex method you wish to use as the default. 5. Click OK. 6. Click OK. E–36 Chapter 5: Duplex Printing Available Fonts Available Fonts • 45 PCL Scalable Fonts • 4 Bitmap Fonts In addition, there are four fonts with fixed spacing available in the IBM and Epson emulations. Printing a Sample of Resident Fonts To see a sample of these fonts, print the Typeface List: 1. Place the printer off-line (press ON-LINE). 2. Press TRAY TYPE/Print Fonts for 2 seconds (until the d...

Herunterladen

Geben Sie zwei Ziffern: