Stimmen - 4, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
1 2 L This unit is compatible with Caller ID. You must subscribe to the appropriate service offered by your service provider/telephone company. Thank you for purchasing a Panasonic product. You can select the English or Spanish language. The display and reports will be in the selected language. The default setting is English. If you want to change the setting, see feature #110 on page 58. Caution: L Do not rub or use an eraser on the printed side of the recording paper, as the print may smear. Notice for product disposal, transfer, or return: L This product can store your private/confidential information. To protect your privacy/confidentiality, we recommend that you erase the information from the memory before you dispose of, transfer or return the product. Environment: L Panasonic’s strategic direction incorporates concern for the environment into all aspects of the product life cycle, from product development to energy saving designs; from greater product reusability to waste- conscious packaging practices. Trademarks: L Microsoft, Windows, Windows Vista, Internet Explorer and PowerPoint are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. L Pentium is a trademark of Intel Corporation in the U.S. and other countries. L Screen shots reprinted with permission from Microsoft Corporation. L Adobe and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. L 3M is a trademark or registered trademark of 3M Company. L Avery is a registered trademark of Avery Dennison Corporation. L XEROX is a registered trademark of Xerox Corporation. L PCL is a trademark of Hewlett-Packard Company. L All other trademarks identified herein are the property of their respective owners. Copyright: L This material is copyrighted by Panasonic Communications Co., Ltd., and may be reproduced for internal use only. All other reproduction, in whole or in part, is prohibited without the written consent of Panasonic Communications Co., Ltd. © Panasonic Communications Co., Ltd. 2009 Important Information For your safety Laser radiation The printer of this unit utilizes a laser. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Fuser unit During or immediately after printing, the fuser unit (1) gets hot. This is normal. Do not touch the fuser unit. Note: L The area near the recording paper exit (2) may also get warm. This is normal. 12 For best performance Toner cartridge and drum cartridge L When replacing the toner cartridge or drum cartridge, do not allow dust, water, or liquids to come in contact with the drum. This may affect print quality. L For optimal performance, genuine Panasonic toner cartridges and drum cartridges are recommended. We cannot be responsible for problems that may be caused by a non-Panasonic toner cartridge or drum cartridge: – Damage to the unit – Poor print quality – Improper operation Toner cartridge L Do not leave the toner cartridge out of the protective bag for a long time. It will decrease the toner life. Drum cartridge L Read the instructions on page 11 before you begin installation of the drum cartridge. After you have read them, open the drum cartridge protective bag. The drum cartridge contains a photosensitive drum. Exposing it to light may damage the drum. Once you have opened the protective bag: – Do not expose the drum cartridge to light for more than 3 minutes. – Do not touch or scratch the black drum surface. – Do not place the drum cartridge near dust or dirt, or in a high humidity area. – Do not expose the drum cartridge to direct sunlight. L To extend the life of the drum cartridge, the power switch should never be turned OFF immediately after printing. Leave the power turned ON for a minimum of 30 minutes after printing. Location L To avoid malfunction, do not position the unit near appliances such as TVs or speakers which generate an intense magnetic field. Static electricity L To prevent static electricity damage to the interface connectors or other electrical components inside the unit, touch a grounded metal surface before touching the components. Environment L Keep the unit away from electrical noise generating devices, such as fluorescent lamps and motors. L The unit should be kept free from dust, high temperature and vibration. L The unit should not be exposed to direct sunlight. L Do not place heavy objects on top of the unit. When you leave the unit unused for a long period of time, unplug this unit from the power outlet. L The unit should be kept away from heat sources such as heaters, kitchen stoves, etc. Damp basements should also be avoided. L During the printing process, heat is used to fuse toner onto the page. As a result, it is normal for the machine to produce an odor during and shortly after printing. Be sure to use this unit in an area with proper ventil...