Stimmen - 2, Durchschnittliche Bewertung: 4.5 ( )

Hersteller: Xerox Dateigröße: 535.99 kb Dateiname: Unterrichtssprache:

Page 4-6 Copy Setups Sides Imaged . Access Copy Setups as described on Page 4-2. . Touch the Sides Imaged button. single-sided copies from single-sided originals. single-sided copies from double-sided originals. double-sided copies from single-sided originals. double-sided copies from double-sided originals. For double-sided options, also select the orientation: the top of the document on each side is at the top of the page. This is the factory default setting. the image on the second side of each page is rotated 180°; therefore, the top of the document on the second side is at the bottom of the page. Copy Setups . Select the preferred default options -see below for an explanation. Touch Save to continue. NOTE: The screen display may differ slightly dependent on machine configuration. 1 1 Sided 2 1 Sided 1 2 Sided 2 2 Sided Head to Head Head to Toe Portrait or Landscape If available, select either Portrait or Landscape. The following illustration depicts the results for Head to Head or Head to Toe selections for Portrait and Landscape images. Xerox Document Centre 220/230/332/340 Setup Guide Page 4-7 Portrait Images Landscape Images. B B Head to Head Head to Head A A for binding on the short edge for binding on the short edge Head to Toe for binding on the short edge A B Head to Toe for binding on the long edge A B . Access Copy Setups as described at the beginning of this chapter. . Touch the Expert Image Quality button. Expert Image Quality . Select the default required - a description of each follows. . Touch Save to continue. Sharpness adjusts the sharpness of the image -select the preferred setting. Grayscale Copying provides improved reproduction of gray levels - select On or (DC220/230) Off. Page 4-8 Copy Setups Auto Exposure select a default setting of On to enhance documents with . colored backgrounds or Off to disable this feature. Margin Shift (DC332/340) Programs the default amount of Margin Shift to move the image up/down or side to side on one or both sides of a page. Margin Shift can be applied to side one and side two of a page. . Access Copy Setups as described at the beginning of this chapter. . Touch the Margin Shift button. . Select the Side 1 or Side 2 button to change the setting or Off to disable this feature. . If Side 2 shift is selected, select Independent and the settings or Mirror to mirror side 1 settings. . Touch Save to continue. Erase (DC332/340) Programs the default settings for the Edge Erase and Border Erase features. The factory default is set for all the erase features switched off and the erase values set to 0 inches. . Access Copy Setups as described at the beginning of this chapter. . If necessary, touch the Additional Setups button Xerox Document Centre 220/230/332/340 Setup Guide Page 4-9 Copy Setups . Touch the Erase button. . Touch Border or Edge Erase to change the settings -a description of each follows, or touch Off to turn this feature off. . Make changes as required. . Touch Save to continue. Border Erase (DC332/340) . Touch the Border Erase button. . Use the scroll buttons to set the default measurement for Border Erase between 0 and 2 inches. . Touch Save to continue. . Select another Setup or touch Exit to exit the setup screens. Page 4-10 Copy Setups Edge Erase (DC332/340) . Use the scroll buttons to set the default Edge Erase settings. . Touch Save. . Touch Close to exit Copy Setups. Xerox Document Centre 220/230/332/340 Setup Guide Page 4-11 Copy Setups Page 4-12 Copy Setups 5 Fax Setups Quick Pathway APress the Access button on the Control Panel AEnter Key Operator PIN - see NOTE ATouch Fax Setups Fax Setups are divided into two areas: -Fax Terminal Setups: to set and change the defaults for the available fax options such as paper size and type, resolution, and mailbox options. -Fax Communication Setups: to set options that affect incoming and outgoing fax documents such as redialing and preventing the receipt of junk fax documents. NOTE: These changes can only be made when a PIN (Personal Identification Number) which has been assigned Key Operator access rights is entered. The default password is #22222 which may be used if PINs have not yet been assigned. Xerox Document Centre 220/230/332/340 Setup Guide Page 5-1 Fax Setups Access the Fax Setups . Press the Access button on the Control Panel. A pop-up window will be displayed on the Touch Screen. . Press the # button on the Control Panel and use the number keypad to enter a Key Operator PIN -see NOTE: The default password - #22222 - may be used if PINs NOTE. have not been assigned. . Touch Enter in the pop-up window. . Touch the Fax Setups button. NOTE: The graphic representations of the user interface screens in this chapter are based on a fully configured Document Centre 332/340. The appearance of these interface screens may differ slightly on other models or configurations. However, feature descriptions and functionality remain the same as described. Page 5-2 Fax Setups Fax Terminal Setups Quick P...

Herunterladen

Geben Sie zwei Ziffern: