Stimmen - 2, Durchschnittliche Bewertung: 4 ( )

Hersteller: Kyocera Dateigröße: 4.67 mb Dateiname: Unterrichtssprache:

If the same type of — (Add paper cassette #.) paper? paper is loaded in another cassette in the same orientation, you can press either one of paper selection keys on the left of the touch panel to switch to that cassette for copying. Add paper in the Multipurpose Is paper of the specified size loaded Load paper of the size indicated in page 2-5 tray. in the MP tray? the MP tray. ## size (Place paper on the Multipurpose tray. ## size) Add paper in the Multipurpose Has all the paper on the MP tray Load paper in the MP tray. page 2-5 tray. been fed? (Add paper on the Multipurpose tray.) Place transparency in the Are any transparencies loaded in the Place transparencies on the MP tray. page 2-5 Multipurpose tray. MP tray? (Place transparencies on the Multipurpose tray.) Change the size of MP tray. Is the specified size paper loaded in Reconfigure the size of the MP tray. page 2-10 the MP tray? Troubleshooting Error Messages Checkpoints Corrective Actions Reference Page Check paper size. Is the specified size paper loaded? Load paper of a size that can be — used. Reposition original. Is the orientation of the specified Change the orientation of the — paper different from that of the original. If you press the Start key original? without doing so, the original will be copied at the current size. Check paper size. Copy paper is Is the specified paper loaded? Or Load the specified paper. Adjust any — not the same size as original. are the settings incorrect? settings that are incorrect. (Paper size in cassette differs from actual size. Check paper size in cassette.) Reposition original or change Is the orientation of the specified Change the orientation of the — cassette. paper different from that of the original. original? (Reset original or select another paper cassette.) Is the copier installed beneath Do not install this machine beneath — fluorescent lights? fluorescent lights. Reset originals in processor. — Remove originals from the optional page 2-16 document processor, stack them uniformly and reset them. Reset all originals in processor. — Remove originals from the optional page 2-16 document processor, and reset them (Reset originals in processor.) in the original order. Reset all originals in Document Are there any originals left in the Reset all originals in the optional — Processor. optional document processor? document processor. (Reset originals in Document Processor.) Cannot copy this paper type. Can the specified copy functions be Select another type of paper. — used with the selected paper type? Cannot staple this paper type. Did you select a paper type that Select another type of paper. — cannot be stapled? Cannot punch this paper type. Did you select a paper type that Select another type of paper. — cannot be punched? Cannot staple this size. Is stapling available for the size of Change the paper size. — the loaded paper? For further (Cannot staple this paper size.) details, see the optional document finisher or 3000 sheet document finisher Operation Guide. Cannot punch this size. Is punching available for the size of Change the paper size. — the loaded paper? For further (Cannot punch this paper size.) details, refer to the optional 3000 sheet document finisher Operation Guide. Cannot staple. Is the maximum page quantity for Decrease the number of sheets to — ## :maximum capacity (Staple) stapling exceeded? For further be stapled to less than the maximum details, see the optional document staple sheet count. (Cannot staple. finisher or 3000 sheet document ## :Max. staples) finisher Operation Guide. The top tray is full of paper. During copying, is the maximum Remove some pages from the — Remove paper, and press "Start" capacity of the output tray output tray and press the Start key. key. exceeded? Printing continues. Troubleshooting Error Messages Checkpoints Corrective Actions Reference Page The top tray is full of paper. Remove paper, and press "Continue" key. During printing, is the maximum capacity of the output tray exceeded? Remove some pages from the output tray and press [Continue]. Printing continues. — Finisher paper capacity exceeded. (Tray #) Remove paper, and press "Start" key. During copying, is the maximum capacity of the optional document finisher or 3000 sheet document finisher output tray exceeded? Remove some pages from the optional document finisher or 3000 sheet document finisher and press the Start key. Printing continues. — Finisher paper capacity exceeded. (Tray #) Remove paper, and press "Continue" key. During printing, is the maximum capacity of the optional document finisher or 3000 sheet document finisher output tray exceeded? Remove some pages from the optional document finisher or 3000 sheet document finisher and press [Continue]. Printing continues. — Remove paper. Finisher tray. Is the maximum capacity of the optional document finisher output tray exceeded? Remove some pages from the optional document finisher. — These functions cannot be combined. Have you selec...

Herunterladen

Geben Sie zwei Ziffern: